★★★★★
August 21, 2025
Door handle.
Easy install, looks good on my door.
Replaces
Part Details
About TRQ:
TRQ is a trusted brand dedicated to making every repair a success story by combining premium parts with easy installation. Each TRQ part is engineered by a team of automotive experts to meet or exceed OEM standards, delivering enhanced performance and maximum longevity. With rigorous in-house testing, the brand ensures superior fit and function across every product line. TRQ also provides customers with best-in-class, step-by-step installation videos—so you can complete repairs with confidence, whether you're a first-time DIYer or an industry professional.
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
This part fits 4 vehicles spanning 2002-2010.
| Year | Make | Model | Description |
|---|---|---|---|
| 2002-2010 | Ford | Explorer | Ford Explorer Front Passenger Side without Keyhole Exterior Door Handle Textured TRQ DHA48872 |
| 2007-2010 | Ford | Explorer Sport Trac | Ford Explorer Sport Trac Front Passenger Side without Keyhole Exterior Door Handle Textured TRQ DHA48872 |
| 2003-2004 | Lincoln | Aviator | Lincoln Aviator Front Passenger Side without Keyhole Exterior Door Handle Textured TRQ DHA48872 |
| 2002-2010 | Mercury | Mountaineer | Mercury Mountaineer Front Passenger Side without Keyhole Exterior Door Handle Textured TRQ DHA48872 |
| Brand Label | Part Number |
|---|---|
| Mercury | 6L2Z 7822404 BDPTM |
| Ford | 6L2Z 7822404 BDPTM |
| Lincoln | 6L2Z7822404BCPTM |
| Lincoln | 6L2Z 7822404 BCPTM |
| Ford | 6L2Z7822404BDPTM |
| Mercury | 6L2Z7822404BDPTM |
| DIY Solutions | BHS00977 |
| Dorman | 80651 |
| Partslink Numbering System | FO1311138 |
| Dorman - HELP | 80651 |
This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace an exterior door handle on this 2003 Mercury Mountaineer. We'll show you on the passenger side, but the driver side is a similar procedure. It's the same part and similar procedure on these Mountaineers from 2002 to 2010. The items you'll need for this is a new exterior door handle from 1AAuto.com, 7mm and 11mm socket and ratchet, flat blade screwdriver, and a 90 degree pick.
Start off by prying out on this panel, and then just slide it off the door handle. Then lift up on the front of your switch panel and just slide it forward. Then push the tab on the harnesses to disconnect them. Now, remove this 7mm bolt and these two 7mm bolts down here. We'll fast-forward as Mike does that. Now, just lift the door panel up and then pull it back and it's free.
Carefully peel back your water shield, and you see Mike's using a razor to just help separate the adhesive.Using a pick, just pry open this clip and then pull the door handle rod free. Then remove this 11mm nut and this 11mm nut right here. We'll fast-forward as Mike does that.
Now pull the door handle from the door and just open it up a little bit to help pull the handle free. Then just pull the door handle rod up and out. This may or may not happen to you, but my stud came out the handle rather than the nut coming off of it, so I'm just going to use a good set of locking pliers here and lock on to it. The stud comes off and the nut comes off.Pull the door handle rod from the old door handle.
Up top is the old door handle. Below is the new one from 1A Auto. You can see they're identical, and they'll fit exactly the same. Okay, so our new handle is obviously black. If you have a broken handle, this will fix your problem easily enough. If you did want to paint it to match, you could do something as crude as just going to a hardware store or something and getting a white paint that matched closely and just spray paint it that way, or you could do an automotive parts store that has a paint department. They could help you match the paint from your vehicle and then you could finish the handle yourself.You would want to take this gasket off if you don't want to paint the gasket otherwise.
Put the rod in, twist it, get it into place, and feed the new door handle down into the door. Then push in the front first. Then open up the door handle, feed the top in, and push it back into place. Then just replace those two 11mm nuts and tighten them up. Reconnect your rod. You want to put it in place. Try and put a little bit of pressure down on the lever you're pushing into, and then push up on the rod just a little bit to make it a little tense back in place and lock the clip.
You've got a number of hooks on the door panel. They go into slots in the door. If you've removed your water shield for any reason, you just want to make sure it's all lined up. You can put the bottom ones on, bottom two, and then just make sure your harnesses come through. Push the door panel in and make sure the front and the back and the top is pushed down, and then reinstall the three 7mm screws. We'll fast-forward as Mike replaces those 7mm bolts and tightens them up.
If you have difficulties starting one of the lower ones, just do the other first one and it should help the other one line up. Plug in your switch panel. Put the back down in first, thrust it down, push it in, and there's a little slot that comes down that this actually hooks into. Put this in, first make sure those back tabs go in, and then make sure it snaps into place.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the driver side exterior door handle on this 2003 Mercury Mountaineer. It's the same part and similar process on these Mountaineers from 2002 to 2010. The items you'll need for this is a new exterior door handle from 1AAuto.com, a 7 and 11mm socket and ratchet, a flat blade screwdriver, and a 90 degree pick.
You want to make sure that your courtesy lights don't stay on so you don't drain you battery. Just make sure you turn those off. Pry out from the bottom of this panel with a flat blade screwdriver. Then just slide the panel towards the front of the vehicle and off the door handle. Then lift up on the front of your switch panel and then slide it forward and up. Then push the tabs on these harnesses and disconnect them. For this last one, you're going to want to use a flat blade screwdriver and push in on the tab and pull it free. Your switch panel is free. Now you want to remove this 7mm bolt and these two 7mm bolts right here. We'll just fast-forward as Mike does that. Pry out the switch and then just pry out the tab on the harness and disconnect the harness. Then feed that back through the door panel. Lift the door panel up and then pull it back. Push the tab on this harness to disconnect it, and your door panel is free.
Peel back this top corner of your water shield and you can see that Mike uses a razor blade to help separate the adhesive. Now, reach in here and just open up this yellow clip and it helps to use a pick tool as you can see. Then, you just pull the rod from that clip and then remove this 11mm nut and this 11mm nut right here. We'll just fast forward as Mike does that. Now, open up your door handle so that you can get the lever outside of the door and then you just pull your door handle free and pull the rod up and out.
I've got my socket and ratchet extension on the inside and you can see I took the door handle off, but the studs stayed here. I'm actually just going to take a set of locking pliers, lock them on to the studs. Just wipe down the area where the door handle goes. Something you don't want to do is shut your door while there's no door handle, but if you happen to, just look down in and find that yellow clip that you unhooked the rod from, and reach down. Let's see here. Just press it with your thumb and open the door up.
Here's our original door handle. At 1A Auto, we sell the chrome door handles. We also sell just a regular black handle that you can paint to match. Obviously, the black door handle, if you have a broken door handle and you just want a handle that works, you can mount the black one on as is and it's fine. If you did want to paint it to match, you can be as crude as just going to the hardware store and finding some paint that's a decent match for your color, paint the handle. You would want to take the gasket off when you paint it. If you want a closer match, you can go to an automotive paint store and purchase paint that matches closer and finish it that way.
We're going to put this chrome handle on. Just take your rod, twist it, and pull it out. Take the new handle and then, again, twist it and put it in and then put your handle down in. You want to put the front in and then push, pull the handle out and push the counterweight in there. Then, line up the stud, put it in, and make sure the gasket is lined up correctly. Take your lock and bend it down off of that rod, so now it's free. Now, you can put it up in place and on the stud for the door handle. Now, the lock's in place and we'll put our first nut on here. You're probably won't be able to see this but I'm just going to take the nut for the front one, the door handle, and put that on as well. We'll just fast forward as Mike tightens up those two 11mm nuts. Make sure your lock rod is in and then just pull it in to the lock. Then put your handle rod back in place and now push up on the rod a little bit, and down on the latch. Push it in and lock it in place. Just make sure your door's unlocked.
To replace your door panel, just reconnect this harness, and make sure you push the harness for your mirror switch through. Then push the door panel into place and slide it down. We'll fast-forward as Mike replaces those three 7mm bolts and tightens them up. Reconnect this switch and push it back into place. Then reconnect your switch panel and slide the back end first. Then push the front end down. Then slide this panel back over the door handle and push those tabs back into place. Then push in the front. You're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
DHA48872
Easy install, looks good on my door.
I ordered this for my passenger rear door handle on the outside. The price and service was excellent. It seemed to be a 'universal' type fitting where the manufacturer could use it for the front handle with a lock OR the back handle with no lock. The bolt on the part was in a different spot than my original one (that was okay because the factory holes in my door already had a spot for it, EXCEPT I had to oval out the hole a tad bit bigger for the handle to fit correctly.) I also had to disassemble the factory handle, remove a little piece....then disassemble the new handle and install the piece from the factory handle. It worked fine, but not what I expected. I thought this was supposed to be a no modification simple, 123 swap.
