★★★★★
September 24, 2026
A/C motor works great and excellent fitment
Will do business again in the future. Happy to have purchased through 1A.
Replaces
About TRQ:
TRQ is a trusted brand dedicated to making every repair a success story by combining premium parts with easy installation. Each TRQ part is engineered by a team of automotive experts to meet or exceed OEM standards, delivering enhanced performance and maximum longevity. With rigorous in-house testing, the brand ensures superior fit and function across every product line. TRQ also provides customers with best-in-class, step-by-step installation videos—so you can complete repairs with confidence, whether you're a first-time DIYer or an industry professional.
Returns: Parts with electrical components cannot be returned once installed.
Left Hand Drive:
All of our auto parts are intended for Left Hand Drive USDM vehicles. If your vehicle is Right Hand Drive, please ensure the part is correct for your specific vehicle.
Attention California Customers:
WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
This part fits 4 vehicles spanning 2003-2008.
| Year | Make | Model | Description |
|---|---|---|---|
| 2003-2006 | Ford | Expedition | Ford Expedition HVAC Blower Motor Assembly TRQ HMA84791 |
| 2004-2008 | Ford | F150 Truck | Ford F150 Truck HVAC Blower Motor Assembly TRQ HMA84791 |
| 2006-2008 | Lincoln | Mark LT | Lincoln Mark LT HVAC Blower Motor Assembly TRQ HMA84791 |
| 2003-2006 | Lincoln | Navigator | Lincoln Navigator HVAC Blower Motor Assembly TRQ HMA84791 |
| Brand Label | Part Number |
|---|---|
| Partslink Numbering System | FO3126125 |
| Ford | 6L1Z19805B |
| Lincoln | 6L1Z19805B |
| Hollander | 615-00642 |
This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the blower motor on this 2005 Ford F150. It's the same part and similar process on these F150s from 2004 to 2008. The items you'll need for this is a new blower motor from 1AAuto.com and an 8 millimeter socket and ratchet.
Your blower motor is located right here. It's held in with these three 8 millimeter bolts. Then disconnect the harness by pulling down on the tab and pushing it off. Then use an 8 millimeter wrench or a socket and ratchet to remove those three 8 millimeter bolts. Once those are removed, just pull the blower motor down as far as you can and then pull back the carpeting, and just maneuver it down and out and over the carpeting.
On the left is the new blower motor from 1AAuto.com. On the right is the old one. You can see they're identical, and they'll fit exactly the same. Take your new blower motor and feed it up into place. You push it in against the carpet as much as you can. Once you get to a certain point, you'll want to pull the carpet back to give yourself a little bit extra room. Then just kind of push it into the insulation and up at the same time, and it'll go into place. Then turn it once you get it up in place so that the holes line up.
Once you get it lined up, just replace those bolts and tighten them up. If you want to speed up the process of tightening them up, you can use an air ratchet, but you want to make sure that you don't over-tighten them, so just tighten them most of the way, and then tighten them the rest of the way using your socket and ratchet. You just want them hand tight. Reconnect your harness.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Will do business again in the future. Happy to have purchased through 1A.
Perfect fit
Exact replacement, in form, fit and finish, for my 2008 F150 FX4. The old fan was going out and this one worked perfectly. The instructional video was extremely helpful, and made replacement very straight forward. The only thing on my F150 Supercrew, I had to move and pull back both the carpet and the pad insulation directly behind it and the firewall, and that made it easy to install, and keep the fan from getting any damage. Overall 100% satisfied.
Perfect fit on a 2008 F150. 1A install video was excellent. I originally thought the blower resister was bad but turns out the bad blower motor was binding (I could hear it) and took out the resister as well. Good thing I replaced the blower first - the resister was a snap to replace behind the glove box.
The video was great and very helpful plus the product was easy to install and worked right away,,,
Good price. Free shipping. Easy to use site. Recommend. Have already purchased other parts from 1A Auto.
works well packaging was great
Works good. I took the short cut in taking out the old and placing new into my 2003 Ford Expedition as outlined on a You Tube example and the new blower worked just fine.
To bad I didn't took a photo. But the item fits perfectly on my F150 XLT 2006
The part that I ordered was perfect so was the customer service..
HMA84791
Hello, I apologize we would not be able to give you an estimate on this job. You could try a local mechanic.
Pull the motor out and see whats inside could have something simple like a couple leafs inside or could be a fin from the old blower has broken off and is rattling around or pinned up against something causing it to click you wont know until you pull it out
My truck is a 2004 F-150 and it was a snap to replace just like your vidio. Ed
