Don't have a photo, But the backing plate that would keep all the grease I placed was not attached to either part!! It made the job a bit harder than it needed to be
Replaces
Don't have a photo, But the backing plate that would keep all the grease I placed was not attached to either part!! It made the job a bit harder than it needed to be
So far the new TRQ axels are working great and it was an easy installation. Really appreciate the video, step by step instructions. If I can do this project, anyone can do it too. Doing it myself saved me around $800
Great packaging and ease of install. However, no machine drilled hole for my hub bolt. So just have to tq it massive per specs.
Bought for 1997 f150. Installed and vibration everywhere. Was nervous to even drive. Bought beefy cv axles from another place now back to normal. Skip on these. Out couple hundred bucks for the mistake
Very poor quality then costumer service gives you a hard time to get a replacement
I bought the front axles and bearings for my f150 heavy half ton pickup now they came quickly but in putting them on the truck next weekend I'll update this a.s.a.p.
awesome, reliable, fast service.
Easy ordering online. Quick delivery and Quality parts. Will do business again. Would recommend to anyone.
No hole drilled for the cotter pin in both CV axles! I guess I'll have to check torque every 20,000 miles
Neither one of the shafts had a hole drilled in it for the castle nut cotter pin, and one of them had the grease cap come out during shipping that holds all the grease in the flange end, i tried to reassemble it but had no luck, instead i had to go to the local parts house and buy two shafts there so i could get the front end back together that day wasnt to happy since i had already put the one shaft on before i noticed there was no cotter pin hole
Yes, this CV Axle set is listed to fit all 2002 Ford F150 models.
These parts are not compatible with vehicles that have been modified with a lift.
This kit is listed to fit all 1997 Ford F150 models.
Yes, this part will fit your vehicle.
An axle is an axle, regardless of drive type. If you can provide us with your full year, make, model and drivetrain we can see if these are correct for you!
Those specifications are not available. Our parts are exact replacements for your vehicle's OEM parts. As long as your year, make, and model match up with our listing, these parts will directly fit and function like the originals.
Actual Measurements are not listed or available. Our parts are exact replacements for your vehicle's OEM parts. As long as your year, make, and model match up with our listing, these parts will directly fit and function like the originals.
no it does not
40-41 teeth on new gears ratios. A1 auto provided great customer services well knowledge staff will recommend them anytime to get it done right and at an affordable cost. My personal experience with A1 auto has been the greatest. Good luck.