★★★★★
October 30, 2023
Great product
Great product like always better than OEM.
Replaces
Part Details
Specifications
About TRQ:
TRQ is a trusted brand dedicated to making every repair a success story by combining premium parts with easy installation. Each TRQ part is engineered by a team of automotive experts to meet or exceed OEM standards, delivering enhanced performance and maximum longevity. With rigorous in-house testing, the brand ensures superior fit and function across every product line. TRQ also provides customers with best-in-class, step-by-step installation videos—so you can complete repairs with confidence, whether you're a first-time DIYer or an industry professional.
Product Features
TRQ CV (constant velocity) drive axles are manufactured using premium raw materials designed to restore original performance. TRQ CV drive axles are new, so there is no core charge with your TRQ purchase. TRQ-designed drive axles utilize neoprene boots, moly grease, stainless steel clamps, and heat-treated ball tracks to ensure extended service life. Each TRQ axle is application-specific so each spline and thread will mate properly for a seamless fit. All products are fit and road-tested in our Massachusetts R&D facility to ensure we deliver on our promise of Trusted Reliable Quality.
CV axles are designed to transmit the power from your vehicle's drivetrain to the wheels while being able to flex and pivot to the demands of the steering and suspension systems. If your vehicle is making clicking noises at lower speeds or when making turns, it may be time to replace your CV axles with our 100% brand new assemblies.
Updated Design: While this part may look different from the one originally installed on your vehicle, it is guaranteed to fit and operate as well or better.
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1A Auto.com, your source for quality replacement parts and the best service on the internet. In this video, we're going to show you how to remove and reinstall the front drive axle, or one side of the front drive axle. Obviously the driver's side is the same. We're doing this on this 97 Expedition. This is the same process for a whole bunch of different Ford and Lincoln trucks and SUVs. Tools we used on this expedition, if you're doing it on a different vehicle some of the sizes may differ a little bit, but Jack and Jack Stands, a large flat blade screw driver, a 13 millimeter 12 point socket, 9/16, 14 millimeter, 19 millimeter, and a 35 millimeter socket, ratchets and extensions. You'll need a breaker bar or a pipe for some extra leverage for some of those bolts, a hammer, punch, torque wrench, and possibly replacement stabilizer links as those often break when you take them apart.
OK, so obviously you are going to start by removing your cap. Now, if you don't have the benefit of air tools, what you'll want to do is start with your wheel on the ground and with your wheel on the ground there's probably three things you're going to want to do: loosen your lug nuts, then there's a thirty five millimeter bolt in the center that holds the axle into the hub, you're going to want to take the cotter pin and the cover off of that and loosen that 35 millimeter bolt and also go underneath and there are seven 13 millimeter 12 point bolts that hold your axle to your front drive, and you'll want to just loosen those seven bolts. Much easier to loosen all these bolts with your tire on the ground held in place if you don't have all the tools that I have access to. Next I'm going to remove the stabilizer link, so I'm going to spray the top of it with some penetrating oil and let it sit for a while. OK, these stabilizer links are sometimes difficult to get apart. You can use hand tools. They will come apart. I just chose to use an impact wrench just to make it easier. I have a 9/16 socket on the bottom and a 14 millimeter socket on the top. OK, use a hammer and pound down on that bolt. Then use a punch, see if you can get it go down through the sleeve.
I end up actually having to use vice grips and a wrench and obviously you also want to remove the other side so you can move your stabilizer bar around easily. OK, what I'm going to do here is put a vice grip onto this shaft. It's a little tighter here. OK, now we're going to remove the half shaft to the CV axle and as I said at the beginning of the video these are the bolts that if you don't have all the tools that I have it might be easier to just loosen them while the vehicle is on the ground. You can see I use a big large crow bar to hold the hub in place while I'm loosening those bolts, and you can see I spin it, loosen one of the bolts, spin it some more, loosen another bolt. So if you were actually doing this with your vehicle on the ground you'd have to probably loosen one or two of the bolts, then roll your car a little bit, put it in park, put the emergency brake on, loosen a couple more, and keep repeating that process. Once it's unbolted, I pull it down and off. I use a pair of pliers and either break off the ends, or just straighten out the cotter pin and pull it out. OK, 35 millimeter. As I said in the beginning if you don't have impact tools this is easier with the tire on and on the ground. Your other option would be to have a helper hold the brakes while you remove it. What I like to do is give it one tap and just watch it, see if it moves, and actually it went pretty freely. If you can pull your stabilizer bar up and out of the way, pull your axle down towards the front, then push it, lift it up, push it out. OK, I'm going to speed through putting the half shaft back in.
One thing I did forget to do, I do a little bit later, is now is the best time to put the grease fitting on top of the ball joint before you put that axle in there. But put the axle in place, get it into the hub and then get it lined up on the axle and start a couple of those 13 millimeter bolts. Then once you get all the bolts in you want to torque them to 60 foot pounds and what I do is I use a black marker. I mark the head of them after I torque them. Then you kind of want to go to the opposite side, torque the next bolt, mark it, and just keep going until they're all torqued. OK, here I'm going to install the sway bar link. I've already put a new link on the other side and just started the nut on it. Bushing, the bushings always go toward the metal. OK, so I've got a bushing on the bottom, going up to the metal control arm and a bushing above that. OK, then my shaft goes on there, and then the washer, then the bushing.
OK, pushing down and in. Make sure that the bushing is kind of centered in the stabilizer bar here. Now bushing, then washer, and then my bolt or nut. OK, now you'll want to use your jack to put some pressure on the suspension and then tighten up the stabilizer to 15 to 17 foot pounds. OK, we'll put on our center nut. Then we're just going to tighten up preliminarily. We're not going to torque it until the wheel's back on. You can put your tire back on and start each lug nut one by one make sure you don't cross thread them. Tighten them down preliminarily. Torque the lug nuts to 100 foot pounds using the star pattern. OK, now using your 35 millimeter socket, torque your hub nut to 220 foot pounds. Put the retainer back on and then the cotter pin and then your wheel cap.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the internet. Please feel free to call us toll free 888-844-3393. We're the company that's here for you on the internet and in person.
Tools used
Hi, I'm Mike from 1A Auto. We've been selling auto parts for over 30 years. We're dedicated to delivering quality auto parts, expert customer service, fast and free shipping, all backed by our 100% satisfaction guarantee. Visit us at 1AAuto.com, your trusted source for quality auto parts.
We're going to start this project. We're going to go ahead and loosen the wheel, the lug nuts here. We're going to use a breaker bar with a 19 millimeter socket. Next, we're going to go ahead and raise and support your vehicle. You can use a jack and jack stands. In this case here, we're using a lift to make it a little bit easier. We'll just go ahead and remove the lug nuts here just by using that socket because we've already loosened those. With the lug nuts removed, we can now go ahead and remove the wheel and tire.
So we're going to go ahead in and we're going to straighten out the cotter pin the best we can. I'm going to try and get that out. Line that up a little bit. Go down below. I'm going to try and pull this out. So now that we have the cotter pin out, I'm going to go ahead and thread the bolts back on here, and you're probably wondering why. We're going to have to use the studs here. You can do this in your driveway. I just want to get these on. I'm not sure which ones I'm going to use, so I'm just going to throw four of these on. You're going to see why in just a second. I'm going to go ahead and use this here as a leverage point, and we don't want to mottle up the threads. That way there we can get our wheel back on later.
Now we have a 35 millimeter socket. That might vary, depending on your application. And this is what we're going to do. There we go. And now that that's fairly loose, we can use a ratchet wrench. Okay. That does come off. Now, as you can see, all the studs are still perfectly fine, no damage.
All right, so we're going to go ahead and remove the brake caliper and the bracket assembly as one complete unit. So to go ahead and start that, we can use a basic c-clamp, and what you want to do is use the c part, but on the inside of the brake pad area, okay, and then bring this backside and put it on the back side of the caliper. Be sure not to catch the hard brake line right there. Now, you don't have to crank it in too far. You just want it to apply some pressure and as you start to tighten it, you can actually see the space between the caliper itself and the pad push in. You just want to do it a little bit.
Back up and you want to do it to the lower half. This lets you release the tension on the caliper, pushes a little bit of brake fluid back up into the system. You can see that this is moving pretty freely right now because a lot less tension on there. So on the back side you have a large bolt right here and one right on the bottom. There's only two of them holding this on and we're actually going to use an 18 millimeter to go ahead and remove those. Once you get those loose, you can go ahead and use a ratchet. Okay, so we're getting these bolts pulled out.
All right, so you want to hold onto this caliper and the bracket. It is a heavy unit. Now you want to be prepared, have either a bungee cord or a strap. You want to pull this off, just slip right off, with your brake pads, caliper and the bracket. You want to anchor this somehow back up to the suspension of the chassis so it doesn't fall down. All right, once you pull off the caliper and the bracket, your rotor can slip right off.
So we're gonna go ahead and straighten out this cotter pin. We want to remove the nut, this castle nut, off of the upper ball joint. All right, so before we go ahead and remove this nut off of the upper control arm ball joint, if you notice here, we have jack supporting the control arm. The reason for this here is that we're basically just trying to get some tension relieved off of the control arm. So that way there where it pops out, it's not at an extreme angle.
So this here brings the control arm up a little bit. It'll make it easier for this to separate. Then we'll continue from there. All right, so we're going to use a 22 millimeter socket and a breaker bar. If the nuts starts to loosen up pretty good for you, you can go ahead and switch over to ratchet wrench. Now what we're going to do here, you can actually see the thread starting to come through. This ball join is tapered that goes into the upper knuckle here, so what you want to do is not completely remove this nut. but bring it down so that you can see some threads in there. What you can actually use here, you can use a pickle fork or you can use the old hammer technique. If you're in your driveway, give that a shot.
So we're going to go ahead and try that hammer first. Any time you're striking anything like this here, metal with a hammer, you're going to want to wear safety glasses. Always protect your eyes. So with this suspended here, we're actually going to try the shock treatment with this here. Because the ball joint is tapered and goes into the knuckle, sometimes with two hammers, if you hit consecutively right on each side, it shocks it so that it pops that tapered ball joint right out. In this case here, worked like charm. Now that we've removed the nut and we took off the initial pressure right here, we're going to go ahead and remove the jack.
We're going to let the suspension droop back down a little bit so we can go ahead and continue on. So right around here, you're going to see there are six 12 point bolts that actually hold the CV axle in place. So we're going to go ahead and remove those there. This is actually going to require a pry bar, a breaker bar, and a 12-point 12 millimeter socket. Then I have a breaker bar here to apply some leverage. What we can do is basically just break these free and then get a ratchet on them. So we can go ahead and zip those right out.
All right, so while we're removing the last bolt here, the axle itself might start to spin, so you can reinstall another bolt and use your pry bar as a little bit of leverage to hold that axle from rotating. Go ahead and crank that out with the ratchet on the bottom. Take out that little bolt. Then you can go ahead and remove the upper bolt by hand and the axle itself, as you can see, drops right out.
Up on the front side here, you're going to want to go ahead and use the hammer to go ahead and tap the spline end of CV axle back into our out of the knuckle itself. You want to manipulate the spindle inside and pull the knuckle out. You can see here, it separates. You can pull it up through the front or, as you can see here, we drop it out through the backside. Go ahead and pull that out.
All right, so right here, we have the original OEM component and over here we have the exact matching 1A Auto component here. Actually, comes with the replacement spindle nut right here in case you happen to damage or mar up the original component. It comes with that with it. Same exact spline. You do want to put some grease on those there, but as you can see, it is a direct replacement with no modifications. So what you might want to do is use a little bit of rust penetrant or apply a little bit of grease to the splines inside here, and/or the splines on the axle shaft here. So when you assemble it, it slides into the hub a lot easier.
I'm going to go ahead and separate that there and try and feed this up through the back. You just want to just kind of manipulate the front of this CV axle to actually come through your hub if you can. Here we go. Now these bolts here, I did go ahead and I cleaned the head of these here, that way there the socket fits on nice without having any slipping of working with dirty components.
So we ended up getting a jack or your lift underneath the knuckle area. What you have to do is kind of support the knuckle with the control arm, so we can go ahead and line up the axle and get that put on. So we just put some weight on the vehicle. Pull the ball joint through. Get the thread on the castle nut just until about the stud starts to poke through the top of the nut area. Just to put some pressure on it, keep this lined up so it doesn't wobble back and forth on you.
Okay and with that supported here, we can go ahead right here and this should line up nice. Just push on the center of the shaft a little bit. Push that axle back in. We just want to get one of these bolts started like so. We're just going to continue the bolt installation. Obviously, we're not going to tighten them up now, we just want to get several threads caught. Make sure you got several threads so you don't risk the chance of stripping any threads when you got to anchor everything else in.
So you're going to want to go ahead and tighten all these down using 12 millimeter and a short extension just to get in here. All right, so the torque spec is roughly 51 to 67 foot-pounds on these here. We're going to go right in the middle at 60 using your torque wrench. Use that trusty pry bar to hold that from rotating around on you.
All right. You can pop that off. We're going to rotate it to the opposite side right here. And just perform that in a crisscross or star pattern until you're all tightened up. Reinstall your axle nut. We're using a 35 millimeter socket for this and the range is 188 to 254 for the torque spec range on this here. We're going to go right in the middle.
All right, so I reinstalled three of the wheel nuts on here, just so I could use the pry bar once again. We don't want to damage the threads on that. So we just use that there as a leverage point. Actually you're going to set that up just like this. We'll go ahead and remove the lug nuts here. Now we're going to go ahead and install the cap right here, making sure that the hole for the cotter pin lines up with the tabs on the crown. Should slip right in and with your pliers, just roll those on over there.
At this point here, you can now go ahead and lower the vehicle back onto your jack stand and remove your jack. So another alternative way to torquing down your hub nut is to simply pop the center cap from behind. This'll give you access to use your torque wrench and socket. So you want to pop that center cap, install the wheel, torque it down, and then lower the vehicle down. Put it on the ground, and go ahead and finish torquing to the specification. Go ahead and reinstall the center cap. You're all set.
All right, so now we're going to go ahead and tighten the ball joint nut here. The range for the torque spec is 57 to 76 foot pounds. We're right in the middle. There we go. So since I went right in the middle of the torque range spec, you have to match up the hole and the ball joint to the notch in the castle nut. I'm off just a tiny bit. So I'm just going to go ahead and tighten this just hair bit more.
So now we're going to go ahead and reassemble the brakes. So we're going to take the original rotor and we're going to install this component here. Then next we want to go ahead and take that caliper, slide that right back on over here. Just going to thread in the two bolts into the back side here. So we're using an 18 millimeter socket with ratchet to go ahead and snug this up. All right so we're going to take the 18 millimeter socket and put it on the torque wrench, and then we're going to tighten this to 136 foot-pounds.
All right, we're going to go ahead and reinstall the tire. We're going to go ahead and reinstall the lug nuts here. You want to get a few threads caught on all of these here. These lug nuts are a 19 millimeter. So we're just going to snug these bottom and out. Bottom of the wheel out to the rotor. We're going to lower the vehicle down onto its own weight and then to a final torque. With the vehicle on the ground, we're going to do its final torque of the wheel which is between 83 and 112 foot-pounds. We're going to do it in a star pattern. She’s all set.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
CSA82127
Great product like always better than OEM.
fit fine
Thanks for the easy convenient way to order parts they arrived quickly and worked great
Well made, fit nicely. Arrived quickly. I'd order from 1A again.
Received this part quickly. Used their on site part matcher to make sure we got the right part, worked perfectly. Only potential issue I saw the part was not drilled for a kotter key like the original was. May not be a problem. New part went on a lot easier than the old one came off. I would recommend 1aauto.com, and expect to make many future purchases from th hem myself.
The CV axle is working fine, solved a vibration problem I was having at 55 MPH and above. Only time will tell regarding the longevity of this part. The CV Axle I had to replace (O'Reilly Auto) only lasted 40K miles, while the OEM (Ford F-150) axle lasted 240K miles. I hope to get far more than 40K miles on the 1A-Auto axle. KG
Fast shipping, item exactly as described, perfect fit, followed the video instruction from teardown to installation of the new part and job was completed without any problems. Will definitely order more parts and I highly recommend your store.
Yes, this will fit either side for the vehicles we list to fit it.
Actual Measurements are not listed or available. Our parts are exact replacements for your vehicle's OEM parts. As long as your year, make, and model match up with our listing, these parts will directly fit and function like the originals.
Much thanks
