/2004 Ford Focus without Appearance Package without HID (High-Intensity Discharge) Headlights Driver & Passenger Side Bumper Mounted 2 Piece Side Marker Light Set DIY Solutions LHT05419
1ALPP00331-Ford Focus Driver & Passenger Side Bumper Mounted 2 Piece Side Marker Light Set DIY Solutions LHT05419
2004 Ford Focus without Appearance Package without HID (High-Intensity Discharge) Headlights Driver & Passenger Side Bumper Mounted 2 Piece Side Marker Light Set DIY Solutions LHT05419
$9.91
$16.95
42% OFF
$16.95
42% OFF
FREE SAME DAY SHIPPING
LHT05419
In Stock
This part doesn’t fit a . Select from parts that fit.
Direct Fit - No vehicle or wiring modification necessary
DOT, SAE, and FMVSS Compliant - Meets on-road use regulations
Matching set for a restored look
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How to Replace Side Marker Light 2000-04 Ford Focus
Created on:
Tools used
13mm Socket
1. Servicing the Side Marker Light Bulb
Twist the socket counterclockwise out of the side marker light
Pull the bulb out of the socket
Push the new bulb onto the socket
If you are servicing the bulbs alone, twist the socket clockwise into the side marker light
If you are replacing the marker light assembly, continue to Step 2
2. Removing the Side Marker Light
Remove the two 13mm nuts from the marker light
Pull off the marker light
3. Installing the Side Marker Light
Push the side marker light into place
Fasten the two 13mm nuts onto the side marker light
Twist the bulb socket clockwise into the side marker light
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the side marker lights. They're the little orange lights below the headlight on the side. The only tool you'll need is a 13mm wrench. In this video I show you it from the bottom. If you want to, you can jack up and secure your vehicle. That will make it a little easier, but otherwise you can probably do it by feel once you know what you're looking for.
Up under here, it's pretty easy to see. You see there's a connection right here. I turn it counter clockwise and pull it out. There's your side marker bulb, you pull that straight out and back in if you're just looking to change the bulb. Put it back in and clockwise to lock it.
If you need to change this full assembly because it's been broken, these are just 13 millimeter speed nuts. That comes out, and to replace it, just reverse. Put the light back in place and then these nuts are designed to thread right onto the plastic so you can start them on. Then push on them as you're tightening them up. Now just reinstall that.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
LHT05419
In Stock
Product Reviews
No Ratings
Be the first to review this item
There are no reviews for this item.
Customer Q&A
Have a question? Ask owners.Have a question about this? Ask people who own it.
Start typing and see existing answers.
Instant Answers
Start typing and we'll see if it was already asked and answered.
If there aren't already some matches, submit a new question.
You'll get fast answers from customers who really own the item(s) and from our product experts. (About half the time you'll get an answer in under 2 hours!)
Good Topics To Ask About
Which items will best meet your needs
What customers who own an item think of it
How to use, fix, or take care of an item
Product information
General advice related to the types of products we sell
Our store policies
Customer Support
For questions about an order you have placed, please contact customer support directly.
No questions have been asked about this item.
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Ford is a registered trademark of Ford Motor Company. 1A Auto is not affiliated with or sponsored by Ford or Ford Motor Company.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.