★★★★★
June 24, 2026
Excellent parts
Excellent parts and guidance
Replaces
About TRQ:
TRQ is a trusted brand dedicated to making every repair a success story by combining premium parts with easy installation. Each TRQ part is engineered by a team of automotive experts to meet or exceed OEM standards, delivering enhanced performance and maximum longevity. With rigorous in-house testing, the brand ensures superior fit and function across every product line. TRQ also provides customers with best-in-class, step-by-step installation videos—so you can complete repairs with confidence, whether you're a first-time DIYer or an industry professional.
Returns: Parts with electrical components cannot be returned once installed.
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the turn signal and wiper lever on this 2005 Ford F150. It's the same procedure for 2004 to 2005, also similar for '06 to '08, although a couple of the connections are a little bit different. The items you'll need for this is a new turn signal switch from 1AAuto.com, 8mm socket and ratchet, 7/32" socket, pick, flat blade screwdriver, 8mm wrench, two-jaw puller, and a T50 Torx bit.
Loosen up your battery cables with an 8mm socket and ratchet and just pull them free. If it's hard to get it off use a flat blade screwdriver to just separate the clamp a little bit and it should pull free.
Down here, underneath your glove box, pull out on this panel. Then using a flat blade screwdriver, pry down on the tab and pull that panel off. Then use your fuse puller and you may need to pry it out. Then on this row of fuses right here, with the red and the blue, you want to pull out this red 10. It's the third one in on this row just under that relay. That's to disarm your airbag.
Now, just pry out on this little panel here. There's a bolt inside of here that is 8mm. Just go ahead and remove that. Once you've removed that bolt and the one in the same spot on the other side, you can just pull this forward. Pry out on the red safety tab and then reach in behind and push down on the holding tab and pull the harness out. Now using a pick, just pry out the gray clip on this harness. Then pry out on the tab at the top and pull the harness free. Now, carefully set this aside.
Now just remove this 7/32" bolt underneath your steering wheel Push the tab on this harness and disconnect it, and then turn your steering wheel until it clicks. Then remove this T50 bolt. You can see here we have a two-jaw puller clipped in behind on the steering wheel. We're tightening it up pushing against the stud to loosen the steering wheel.
Now, pull down on this lever and then pull down on this panel. You want to push in at the same time, and it'll unclip. Then you just lift it up and out. Then, remove these two 7/32" bolts. We'll fast forward as Mike does that. Now lift this panel up and then pull it off the lever. Now remove this 7/32" bolt right here. Now push this tab and slide the switch up and off, and then push the tab to disconnect this harness and do the same for this one. To remove that last harness, we first have to pry up on this tab and unclip the other end of this harness. Now you can access that last harness, so you just push the tab and disconnect it.
On the left, is the old turn signal switch; on the right, is the new one from 1A Auto. You can see they're identical and they'll fit exactly the same. Using a pick, just pull out the spring of your old switch and then just drop it into your new one. Then, making sure the spring stays in, just slide that switch down into those slots until it's all the way down, and then reconnect those harnesses. Now, replace this 7/32" screw and tighten it up. Now, lift this up and put this panel back down over the turn signal switch, and then line it up. You want to slide it down onto that gasket and then replace those two 7/32" screws. Now take the lower panel, tuck it down in, and then you want to slide it up that gasket. Then clip the clips along the top back into each other and do the same thing on the other side, and then replace that 7/32" screw.
Installing the steering wheel there is a yellow dot on the shaft that should point to the top of your steering wheel. Reconnect this harness and replace this T50 screw.
Make sure your steering wheel is straight and then take your airbag and horn assembly, reconnect this lower harness, and then push that gray clip back in. Then, take this harness and push it back into place and push that red clip in to lock it. Once you get the airbag lined up you can replace the 8mm bolt on either side. We'll fast forward as Mike does that. Once you've replaced the bolts, make sure you've replaced those two covers as well. Now push your fuse back into place, put the fuse panel back on making sure your fuse puller is back in there. Then just put these tabs into those slots and close the panel.
Reconnect your battery cables and tighten up those 8mm bolts. Then just put this cover back down and you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
SWA41790
Excellent parts and guidance
My high beam lights would sometimes stay on draining my battery. The highbeam switch on the multifunction turn signal was the culprit. I figured this out only once the mechanical part of the switch broke. The video of the repair procedure gave me the guidance and confidence to make the repair. The replacement part works perfectly.
Great condition perfect replacement
Unfortunately after I got it installed, I found that the turn signal does not turn off automatically after i turn left or right!
It was a perfect match I give it a 5 star rating.
Good quality, better price and faster delivery.
was easy to install but took a little longer than i wanted to install it but almost a direct replacement for my 2006
Very happy with the part looking like the original and thebvideo very helpful.
I was very pleased with my new turn signal combination switch. It looks exactly like a factory OEM switch, but in my opinion it functions better ! It feels tighter and smoother, without the slack. This switch was less expensive than an original OEM part as well ! The provided installation video was very well done, and SAFELY walked me through the process of removing and replacing the airbag and steering wheel, to access the old switch. I did have to borrow a two jaw gear puller to remove the steering wheel. It was a free loaner tool from a local auto parts store. Very pleased to have been able to perform the job myself, and stay away from the dealership.
Perfect fit. Works great
Yes it does works great just install it the same way you remove the old one easy peasy
Johnny. Got the whole switch works great be better to get it.
Dad and I replaced his on his truck and we learned how by watching a you tube video.
Thanks for your inquiry. We only sell this part as the unit shown in the images on the listing. Please let us know if we can be of any further assistance and we will be happy to help.
Thanks for checking us out. We are unable to cross reference the part number you have provided. This part is specific to vehicles with a particular set of options. We will need more information about your vehicle to confirm the fit.
You should not need to pull the steering wheel off for the install.
Hello, There could be multiple reasons why you're having this particular problem. We suggest taking your vehicle to a nearby reputable shop to identify the cause. Once you know the cause, we'll be happy to see if we carry the parts and how-to videos needed for your repair. Thank you!
Why do you need to reuse the spring? I saw 5he video you pulled it out then just dropped it back in. What function does it do
Yes, you will have to take off all of the steering wheel covers as well to change out the turn signal assembly. The steering wheel comes off after the covers.
I did not have a puller so had to buy one and be sure you don't ruin the threads on the shaft that holds the nut in place. I disconnected the battery and pulled the fuse for the airbag and that for was the scariest part putting that fuse back in and hoping the airbag didn't deploy. Be sure to install steering wheel correctly when putting everything back together.
