★★★★★
December 14, 2025
Great product.
Replaces
About TRQ:
TRQ is a trusted brand dedicated to making every repair a success story by combining premium parts with easy installation. Each TRQ part is engineered by a team of automotive experts to meet or exceed OEM standards, delivering enhanced performance and maximum longevity. With rigorous in-house testing, the brand ensures superior fit and function across every product line. TRQ also provides customers with best-in-class, step-by-step installation videos—so you can complete repairs with confidence, whether you're a first-time DIYer or an industry professional.
Install Tip: When replacing steering components, have a professional alignment performed afterwards. This ensures proper tracking and even tire wear.
Our steering and suspension components are pre-greased and sealed for long life and do not require the extra maintenance typically required by greaseable versions.
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
This part fits 3 vehicles spanning 2004-2008.
| Year | Make | Model | Description |
|---|---|---|---|
| 2004 | Ford | F150 Truck | Ford F150 Truck with New Body Style Front Driver & Passenger Side Outer 2 Piece Tie Rod Set TRQ PSA54932 |
| 2005-2008 | Ford | F150 Truck | Ford F150 Truck Front Driver & Passenger Side Outer 2 Piece Tie Rod Set TRQ PSA54932 |
| 2006-2008 | Lincoln | Mark LT | Lincoln Mark LT Front Driver & Passenger Side Outer 2 Piece Tie Rod Set TRQ PSA54932 |
| Brand Label | Part Number |
|---|---|
| MOOG Chassis Products | ES3691 |
| DIY Solutions | SUS01487 |
| DIY Solutions | SUS07592 |
| Mevotech | MES3691 |
| Ford | 4L3Z3A130CA |
| Mevotech Supreme | MES3691 |
This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace an outer tie rod on this 2005 Ford F150. We show you on the driver side but the passenger side is the same procedure. The items you'll need for this is a new outer tie rod from 1AAuto.com; a 7, 10, and 21mm socket and ratchet with a piece of pipe for leverage; two adjustable wrenches; a tape measure; a hammer; a torque wrench; and jack and jack stands.
Start off by prying off the hub cap. Then loosen up these lug nuts using a 21mm socket and ratchet and a piece of pipe for some extra leverage. Once you get each of them loosened up you can raise the vehicle and remove them the rest of the way. Now pull the wheel off.
Now turn the wheel and then remove this 21mm nut at the top of your outer tie rod. Then once you remove it, you want to just put it back on just a couple threads. Spray the nut at the end of your outer tie rod with some penetrating fluid, and then, using two adjustable wrenches, just loosen it up. Now hammer the knuckle until the outer tie rod drops down. Now you can remove that nut and just set your outer tie rod off to the side.
Now measure from the boot on your inner tie rod to the center of your outer tie rod, and just remember that distance. Then you can twist your outer tie rod free. We'll fast forward as Mike does that.
On the left is the old outer tie rod. On the right, is the new one from 1A Auto. You can see they're identical and they'll fit exactly the same. Take your new outer tie rod and twist it into place. We'll fast forward as Mike does that. Now, measure from the boot to the inside of the outer tie rod and make sure it's the same distance. If it is, you're all set. If not, you'll have to move that nut to adjust it.
Now, feed your outer tie rod up through the wheel knuckle and replace that nut and tighten it up. If the studs start spinning when you use your 21mm socket just use a 21mm wrench and a 10mm socket to hold the stud in place and tighten it up. Then torque that to 111 foot pounds.
Now, using two adjustable wrenches just tighten that nut back up, and then put your grease fitting into place on the outer tie rod. Then just tighten it up with a 7mm socket and ratchet. Using a grease gun, just top it off with some grease.
Now we'll fast forward as Mike replaces the wheel, and replaces the lug nuts, and tightens them preliminary, and then lowers the vehicle and tightens them the rest of the way. Then torque each of them, in a crossing pattern, to 120 foot pounds. Then just replace your hub cap and you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Great product.
Great part, no issues
Replace the tie rods tie rod ends and the whole front end parts of my 2006 F150 265,000 MI with 1A Auto parts can't find a better deal came quick, great price ,parts are exceptional they give you a video to do the job the torque and everything you're going to buy car parts buy from 1A Auto
Good choice
Fast shipping. Fit my 2006 f150 perfectly.
I had a harder time getting the jam nut broke loose. They were perfect.
The product is great. The packaging could be improved. Arrived in box all banged up and smashed and air pouch that was included was deflated. The tie rods bounced around and banged up against either other in shipment. Should have used crumbled paper with heavy items instead of a single air pouch that pops when shipping.
These parts are awesome and fit my vehicle perfectly. Also the instructional videos are amazing!! The only reason i gave 4 stars is the nut that comes with these is pure junk. keep and reuse the original nut if you can. when i tried to torque it down to the suggested 111 ft/lbs the new nut just kept spinning and spinning. it wouldn't tighten.
PSA54932
Affirmative.
Most of our suspension components are sealed from the factory and do not include grease fittings.
