Replaces
About Trail Ridge:
Trail Ridge Truck Accessories are developed and built with a promise to provide high quality, durable parts for your truck; backed by the best warranty in the automotive industry. Manufactured from the highest quality materials and constructed to meet or exceed OEM standards. Every Trail Ridge part is rigorously tested ensuring superior fit, function, and durability. Quality, trusted value, and hassle-free installation backed by our 100% satisfaction guarantee.
Exact fit - To obtain proper fit and function confirm your vehicle has the exact mirror options listed.
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
This part fits 5 vehicles spanning 2009-2012.
| Year | Make | Model | Description |
|---|---|---|---|
| 2009-2010 | Ford | F250 Super Duty Truck | Ford F250 Super Duty Truck Driver & Passenger Side with Marker Light 2 Piece Power Without Memory 180 Degree Swing Textured Black Towing Mirror Set with Passenger Side Temperature Sensor Power, Manual Folding, with Smoked Signal Lens Trail Ridge TR00027 |
| 2011-2012 | Ford | F250 Super Duty Truck | Ford F250 Super Duty Truck Driver & Passenger Side with Marker Light 2 Piece Power Without Memory 180 Degree Swing Textured Black Towing Mirror Set with Passenger Side Temperature Sensor Trail Ridge TR00027 |
| 2009-2010 | Ford | F350 Super Duty Truck | Ford F350 Super Duty Truck Driver & Passenger Side with Marker Light 2 Piece Power Without Memory 180 Degree Swing Textured Black Towing Mirror Set with Passenger Side Temperature Sensor Power, Manual Folding, with Smoked Signal Lens Trail Ridge TR00027 |
| 2011-2012 | Ford | F350 Super Duty Truck | Ford F350 Super Duty Truck Driver & Passenger Side with Marker Light 2 Piece Power Without Memory 180 Degree Swing Textured Black Towing Mirror Set with Passenger Side Temperature Sensor Trail Ridge TR00027 |
| 2011-2012 | Ford | F450 Truck | Ford F450 Truck Driver & Passenger Side with Marker Light 2 Piece Power Without Memory 180 Degree Swing Textured Black Towing Mirror Set with Passenger Side Temperature Sensor Trail Ridge TR00027 |
| Brand Label | Part Number |
|---|---|
| Ford | BC3Z17682BA |
| Ford | 9C3Z17683BA |
| Motorcraft | 9C3Z17682BA |
| Partslink Numbering System | FO1321342 |
| Partslink Numbering System | FO1320342 |
| Partslink Numbering System | FO1321401 |
This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the mirrors on a 2011 Ford F250. This vehicle has the XLT trim, so if your vehicle has different trim, it may be a slightly different procedure. You'll need new mirrors from 1AAuto.com, a 7mm socket, 10mm deep socket, and a ratchet and extension.
To start, use a screwdriver and pry this little panel off. There are two 7mm bolts there, and there's another two down at the bottom. Two panels are clipped down. First, the one where your door lock switch is and your window switch, that just pulls straight up. I'm going to pull the front straight up and the back straight up, and then there are harnesses for each. Little tabs that you press with your thumb or finger, and pull the harnesses out. Then on top, you may need a plastic tool or a screwdriver to carefully pry straight up on the mirror switch panel. I try and do as much I can with just my fingers so I don't end up scratching the plastic on the door panel at all. Then pull straight up, and straight up on the sides, and then straight up on the end. Again, there are two harnesses that plug in, and use your fingers, push the tab, and disconnect. Pull straight out on this panel. Now pull the door panel up and off. Pull back the top corner of your water shield, and then there's the connector. Pull this orange safety connector out, and then push the button, disconnect, and then push that back into the door.
Pull up on the shield here and expose that hole down here. Expose that hole and then pull off these two rubber grommets. Inside you'll see the four 10mm nuts that hold the mirror on. Fast-forward here as I remove basically three of the four nuts, and most of the fourth one. Then as that last one comes out, hold onto the mirror. The mirror will break free, and then bring it out and then you have to lift the harness up and out.
You can see here our old mirror's on top, and our new mirror from 1A Auto is on the bottom. They look exactly the same from this angle, and from the back they are the same. There's my face in the lower one. We went with the smoke signal on our new ones. We actually sell both the smoke signal and the regular orange signal. They are interchangeable.
You are going to want to remove your speaker. Four 7mm bolts or screws hold it in. We'll remove those; fast-forward a little bit. Then, once you get it loose, you press the tab on the connector and pull it free. Install the new mirrors. It's a good thing to have friend here. These are pretty heavy mirrors. You want to put the harness through the hole and guide it down. Then get the mirror lined up and in place. Have one of the 10mm nuts and your socket ready. Hold the mirror in place and start one of the nuts on there. I'm looking, checking, marking to make sure that the mirror pad is all lined up, and it is. We'll fast-forward here as we start the other three nuts on and then tighten them up. You want to get these really good and tight. Those are heavy mirrors, and you want to make sure they're held in place well.
Reach through the speaker hole and find the end of the harness, and put it through there. Then make sure you pull that safety back. Hook the harness in and set the safety. Reinstall the two rubber grommets and then put that little shield back in place.
Then make sure your water shield's back in place. Make sure you reconnect the speaker and use the four 7mm bolts and put it back in place. Reinstall, I lift the panel up in place. You'll want to put the door lock knob through at the top first. Actually, what I'm doing is pulling the wiring harnesses for the door locks and the power windows through, then put the panel up in place. Make sure the door lock goes through, and then look down and see the different clips that go into the door. Then you rest it on the bottom two at first, make sure again that your harnesses are through. Then put the door lock knob through, and push the panel against the door and slide it down into place. Then make sure it's fully engaged and it's nice and tight against the door handle all the way through, or all the way around. I apologize for the angle here, but I'm putting the two switch panels back in place. Connect the harnesses, and then snap them back into place. The mirror's done, and now I'm doing the window and door lock panel. A little high speed here as I put the four bolts back in. Then I replace that little trim panel. It does only go in one way. I'm trying to do it upside down right here, and then I figure out that it goes the other way and snaps right into place. Then the filler panel snaps right into place.
Thanks for tuning in. We hope this video helped you out. Next time you need parts for your car, please visit 1AAuto.com. Also check out our other helpful how-to and diagnosis videos.
I got a couple sets of these heated/lighted mirrors to replace old rusting OEM mirrors, I have gotten other brand replacements in the past that have been terrible especially for optical clarity, these mirrors check all the right boxes with the drivers of the snow plow trucks.
Great product! Easy install and they work as they should. Seem to be a good value, very happy with the purchase.
Got the mirrors quickly. Very easy to install and got new hardware with them.
I mainly liked that it was equipped with the air temperature sensor. The only thing that was a bummer was the turn signal indicator had smoked lens instead of yellow.
Great product for the price make sure when ordering they have the ambient air sensor
Mirrors are great. Great price, fit like a glove. Very easy install
Good fit and economical as a replacement.
Exact fit , good product , mirrors are operating great
These mirrors are great, rock solid. I highly recommend these mirrors. I found no cons just pros, solid mounting, easy to install and look better than the factory mirrors.
Their products are closest to getting them from the dealership without paying dealership prices I highly recommend using 1A Auto their prices are very reasonable Their products are excellent they are very easy to work with with their customer service with installation and any other issues you may occur I am very very pleased this is one of the best online stores I've ever used
TR00027
Mirrors should be replaced in an "option for option" fashion. If your mirrors do not have the same options that are listed in our listing, there is a possibility that this mirror may not function properly. The Mirror does not manually fold but does have heat and towing.
Mirrors are power but they are not power folding
This part will not fit your vehicle, but we may have a part that is listed to fit. Please enter your vehicle's year make and model in the search bar at the top of the page. This will display parts guaranteed to fit your vehicle. Just be sure to verify all of the information shown in the Vehicle Fit tab before ordering.
Yes they do you can order chrome if you eant
Hello Michael, To reset the sensor you'll have to disconnect the battery for 10-15 minutes. This will allow the computer to fully reset. If you still have the issue with the temp sensor after the reset please let me know!
