★★★★★
December 1, 2023
Installed very easy! Looks great!!
Replaces
About TRQ:
TRQ is a trusted brand dedicated to making every repair a success story by combining premium parts with easy installation. Each TRQ part is engineered by a team of automotive experts to meet or exceed OEM standards, delivering enhanced performance and maximum longevity. With rigorous in-house testing, the brand ensures superior fit and function across every product line. TRQ also provides customers with best-in-class, step-by-step installation videos—so you can complete repairs with confidence, whether you're a first-time DIYer or an industry professional.
Product Features
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
This part fits 9 vehicles spanning 1990-1997.
| Year | Make | Model | Description |
|---|---|---|---|
| 1990 | Ford | Bronco | Ford Bronco From 10/01/89 Production Date Driver & Passenger Side 2 Piece Tail Light Set with Smoked Lens TRQ Performance LTA71051 |
| 1991-1996 | Ford | Bronco | Ford Bronco Driver & Passenger Side 2 Piece Tail Light Set with Smoked Lens TRQ Performance LTA71051 |
| 1990 | Ford | F150 Truck | Ford F150 Truck From 10/01/89 Production Date Driver & Passenger Side 2 Piece Tail Light Set with Smoked Lens TRQ Performance LTA71051 |
| 1991 | Ford | F150 Truck | Ford F150 Truck Driver & Passenger Side 2 Piece Tail Light Set with Smoked Lens TRQ Performance LTA71051 |
| 1992-1996 | Ford | F150 Truck | Ford F150 Truck with 6 Foot 9 Inch Bed Driver & Passenger Side 2 Piece Tail Light Set with Smoked Lens TRQ Performance LTA71051 |
| 1992-1996 | Ford | F150 Truck | Ford F150 Truck with 8 Foot Bed Driver & Passenger Side 2 Piece Tail Light Set with Smoked Lens TRQ Performance LTA71051 |
| 1997 | Ford | F250 HD | Ford F250 HD Driver & Passenger Side 2 Piece Tail Light Set TRQ Performance LTA71051 |
| 1990-1996 | Ford | F250 Truck | Ford F250 Truck Driver & Passenger Side 2 Piece Tail Light Set TRQ Performance LTA71051 |
| 1990-1997 | Ford | F350 Truck | Ford F350 Truck with 8 Foot Bed Driver & Passenger Side 2 Piece Tail Light Set TRQ Performance LTA71051 |
| Brand Label | Part Number |
|---|---|
| Ford | E9TZ 13404 C |
| Ford | E9TZ13404C |
| Ford | E9TZ 13405 C |
| Ford | E9TZ13405C |
| Partslink Numbering System | FO2800106 |
| Partslink Numbering System | FO2801105 |
This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source from quality replacement parts and the best service on the internet. Hi, I'm Mike from 1AAuto. I hope this how-to video helps you out and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video we're going to show you how to service a taillight on this '96 Ford F150, pretty much the same as any '92-'96 F150, 250 and 350, as well as the '97 F250's and F350's. You probably just need a Phillips screwdriver. This truck has one of the screws that is a little bit rusty and stuck, so I have to use a couple of other tools that I show you.
These taillights are pretty straight forward repair. There are two Phillips screws on the outside and then there are two Phillips screws also right here on the inside. There and there. OK, we'll start with the inner ones first. Put the screwdriver in there. They can be a little rusty, so I'm just using a hammer. Hit the screwdriver a few times that usually breaks the screw loose. OK, one of these is rather tough, so this is actually an impact driver and what you do is you turn it to cock it, and then when you hit it, it both presses the tip in and turns it at the same time.
I'm just going to load that into the screw here, pushing against it and turning. OK. I hit it with the hammer and it comes loose. Worst case scenario, if you have a bolt on these that's really tough, if your taillight's broken, you can actually just break the taillight away and then the screw will come out. The other thing is, you can drill the head of the screw off and take the rest of the light out. It's coming out for me. Take those out. I just pull the light away. If you're just looking to change the bulb, these sockets twist counter-clockwise and come out. OK, the bulbs just pull right out of the socket, and back in; same thing down here. Push the other socket back in; new light from 1aauto, exactly the same as the old light. OK. So go right back on there. Just line up the sockets, get them in, twist to lock. Put this one in, twist to lock.
The taillight will go right back in place. What I'm going to do is, I'm going to push in, peek back, put your screws through and you can see back in there where the screw goes in, make sure it's lined up. Now I'm just going to start my outer screws in. I'm not going to tighten them up all the way yet. Push the light in. Just make sure the inner screws get lined up first. Start them in. OK. Then once you have them all started in, I just snug them all at first. Make sure the light is seated correctly and then tighten them up afterwards. When you tighten them up, just get them firm. You don't want tighten them up too much cause you can break the housing and break the light if you tighten them up too much.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the internet. Please feel free to call us toll free on 888-844-3393. We're the company that's here for you on the internet and in person.
Installed very easy! Looks great!!
LTA71051
This will come with everything needed to install, included the resistors which you can secure with double-sided tape.
Currently, we do not carry this part for your vehicle. We're always updating our inventory so please check back soon!
Yes, the LED bulbs will be sealed and not replaceable. We would not suggest modifying the part with different bulbs as it may cause the part to not function properly.
Yes, these tail lights will be legal for daily street driving. They will use a combination of LED bulbs and an Incandescent bulb which should match your original bulb.
