Replaces
Frequently bought together
Part Details
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video on this truck we've got a code for a malfunctioning knock sensor, so we'll show you. We went underneath, investigated, and found that the wire was broken, so we just went out, got a new connection end and then spliced it back in and set it back up. Now the truck runs with no codes flashing.
Right up here is the sensor I will be replacing. I have a 7/8 inch fitting wrench. Put it up onto the O2 sensor. Then I'm going to use another wrench. Put it on there. That will give me some extra leverage. The exhaust is hot still. That will hopefully help me get some more . help it break free. It's not breaking free the easy way.
Right up in here, we can see this is our knock sensor. You can see the problem right off the bat. There is no wire. This is the insulation. Pull the wire out. There's the wire. The wire is broken. We'll just remove this. Squeeze here with both fingers. That comes off.
We've got a new connection. We're going to splice it on. We've got our wire stripped just about 1/4 of an inch off. Insert that into our splice. Take our crimping pliers and put a nice crimp in both the connector as well as the insulation. That's nice and secure. Here's my wire here. We've stripped off the same thing on the end. We'll insert that into our splice. This wire insulation actually really shouldn't be wired high on there. It causes too much stress on this wire, and that's why it broke in the first place. So, we'll wrap that back around. We'll just fast forward here a little bit as we just put that insulation onto the new wire. Tape it and plug it back in. Just position that insulation so it protects from chafing.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
