★★★★★
October 25, 2024
Sway bar links fit perfectly
Parts matched OEM and installed easily. Video included on the website was extremely helpful.
Replaces
About TRQ:
TRQ is a trusted brand dedicated to making every repair a success story by combining premium parts with easy installation. Each TRQ part is engineered by a team of automotive experts to meet or exceed OEM standards, delivering enhanced performance and maximum longevity. With rigorous in-house testing, the brand ensures superior fit and function across every product line. TRQ also provides customers with best-in-class, step-by-step installation videos—so you can complete repairs with confidence, whether you're a first-time DIYer or an industry professional.
Our steering and suspension components are pre-greased and sealed for long life and do not require the extra maintenance typically required by greaseable versions.
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
This part fits 37 vehicles spanning 1957-2016.
| Year | Make | Model | Description |
|---|---|---|---|
| 1997-2005 | Buick | Century | Buick Century Front Driver & Passenger Side 2 Piece Sway Bar Link Set TRQ PSA55628 |
| 2005-2007 | Buick | LaCrosse | Buick LaCrosse Front Driver & Passenger Side 2 Piece Sway Bar Link Set TRQ PSA55628 |
| 2008 | Buick | LaCrosse | Buick LaCrosse CXS Front Driver & Passenger Side 2 Piece Sway Bar Link Set TRQ PSA55628 |
| 2008-2009 | Buick | LaCrosse | Buick LaCrosse CX Front Driver & Passenger Side 2 Piece Sway Bar Link Set TRQ PSA55628 |
| 2008-2009 | Buick | LaCrosse | Buick LaCrosse CXL Front Driver & Passenger Side 2 Piece Sway Bar Link Set TRQ PSA55628 |
| 1997-2004 | Buick | Regal | Buick Regal Front Driver & Passenger Side 2 Piece Sway Bar Link Set TRQ PSA55628 |
| 2002-2007 | Buick | Rendezvous | Buick Rendezvous Front Driver & Passenger Side 2 Piece Sway Bar Link Set TRQ PSA55628 |
| 2005-2006 | Buick | Terraza | Buick Terraza All Wheel Drive Front Driver & Passenger Side 2 Piece Sway Bar Link Set TRQ PSA55628 |
| 1967-1978 | Cadillac | Eldorado | Cadillac Eldorado Front Driver & Passenger Side 2 Piece Sway Bar Link Set TRQ PSA55628 |
| 2000-2013 | Chevrolet | Impala | Chevrolet Impala Front Driver & Passenger Side 2 Piece Sway Bar Link Set TRQ PSA55628 |
| 2014-2016 | Chevrolet | Impala Limited | Chevrolet Impala Limited Front Driver & Passenger Side 2 Piece Sway Bar Link Set TRQ PSA55628 |
| 2000-2007 | Chevrolet | Monte Carlo | Chevrolet Monte Carlo Front Driver & Passenger Side 2 Piece Sway Bar Link Set TRQ PSA55628 |
| 2005-2006 | Chevrolet | Uplander | Chevrolet Uplander All Wheel Drive Front Driver & Passenger Side 2 Piece Sway Bar Link Set TRQ PSA55628 |
| 1997-2005 | Chevrolet | Venture | Chevrolet Venture Front Driver & Passenger Side 2 Piece Sway Bar Link Set TRQ PSA55628 |
| 1972 | Dodge | D100 Pickup | Dodge D100 Pickup Front Driver & Passenger Side 2 Piece Sway Bar Link Set TRQ PSA55628 |
| 1972 | Dodge | D200 Pickup | Dodge D200 Pickup Front Driver & Passenger Side 2 Piece Sway Bar Link Set TRQ PSA55628 |
| 1972 | Dodge | D300 Pickup | Dodge D300 Pickup Front Driver & Passenger Side 2 Piece Sway Bar Link Set TRQ PSA55628 |
| 2002-2005 | Kia | Sedona | Kia Sedona Rear Driver & Passenger Side 2 Piece Sway Bar Link Set TRQ PSA55628 |
| 1957-1959 | Oldsmobile | 98 | Olds 98 without Air Suspension Front Driver & Passenger Side 2 Piece Sway Bar Link Set TRQ PSA55628 |
| 1958 | Oldsmobile | Dynamic | Olds Dynamic without Air Suspension Front Driver & Passenger Side 2 Piece Sway Bar Link Set TRQ PSA55628 |
| 1958 | Oldsmobile | Fiesta | Olds Fiesta without Air Suspension Front Driver & Passenger Side 2 Piece Sway Bar Link Set TRQ PSA55628 |
| 1998-2002 | Oldsmobile | Intrigue | Olds Intrigue Front Driver & Passenger Side 2 Piece Sway Bar Link Set TRQ PSA55628 |
| 1997-2004 | Oldsmobile | Silhouette | Olds Silhouette Front Driver & Passenger Side 2 Piece Sway Bar Link Set TRQ PSA55628 |
| 1961-1966 | Oldsmobile | Starfire | Olds Starfire Front Driver & Passenger Side 2 Piece Sway Bar Link Set TRQ PSA55628 |
| 1957-1959 | Oldsmobile | Super 88 | Olds Super 88 without Air Suspension Front Driver & Passenger Side 2 Piece Sway Bar Link Set TRQ PSA55628 |
| 1966-1978 | Oldsmobile | Toronado | Olds Toronado Front Driver & Passenger Side 2 Piece Sway Bar Link Set TRQ PSA55628 |
| 2001-2005 | Pontiac | Aztek | Pontiac Aztek Front Driver & Passenger Side 2 Piece Sway Bar Link Set TRQ PSA55628 |
| 1959-1964 | Pontiac | Bonneville | Pontiac Bonneville without Air Suspension Front Driver & Passenger Side 2 Piece Sway Bar Link Set TRQ PSA55628 |
| 1959-1964 | Pontiac | Catalina | Pontiac Catalina without Air Suspension Front Driver & Passenger Side 2 Piece Sway Bar Link Set TRQ PSA55628 |
| 1962-1964 | Pontiac | Grand Prix | Pontiac Grand Prix without Air Suspension Front Driver & Passenger Side 2 Piece Sway Bar Link Set TRQ PSA55628 |
| 1997-2003 | Pontiac | Grand Prix | Pontiac Grand Prix Front Driver & Passenger Side 2 Piece Sway Bar Link Set TRQ PSA55628 |
| 2004-2008 | Pontiac | Grand Prix | Pontiac Grand Prix with 34mm Diameter Front Sway Bar Front Driver & Passenger Side 2 Piece Sway Bar Link Set TRQ PSA55628 |
| 1999-2006 | Pontiac | Montana | Pontiac Montana Front Driver & Passenger Side 2 Piece Sway Bar Link Set TRQ PSA55628 |
| 1959-1964 | Pontiac | Star Chief | Pontiac Star Chief without Air Suspension Front Driver & Passenger Side 2 Piece Sway Bar Link Set TRQ PSA55628 |
| 1997-1998 | Pontiac | Trans Sport | Pontiac Trans Sport Front Driver & Passenger Side 2 Piece Sway Bar Link Set TRQ PSA55628 |
| 1960-1961 | Pontiac | Ventura | Pontiac Ventura without Air Suspension Front Driver & Passenger Side 2 Piece Sway Bar Link Set TRQ PSA55628 |
| 2005-2006 | Saturn | Relay | Saturn Relay All Wheel Drive Front Driver & Passenger Side 2 Piece Sway Bar Link Set TRQ PSA55628 |
| Brand Label | Part Number |
|---|---|
| MOOG Chassis Products | K5342 |
| DIY Solutions | SUS00750 |
| DIY Solutions | SUS06178 |
| General Motors | 15851956 |
| MOOG Chassis Products | K700527 |
| Mevotech | MK5342 |
| QuickSteer | K5342 |
| Mevotech Supreme | MK5342 |
This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace a front sway bar link on a 2006 Chevy Impala. It's the same for model years 2000 through 2012, and the procedure is exactly the same on the left side, and on the right side. To perform this repair, you'll need a 13, 14, and 19 millimeter sockets and socket wrench; 13 and 14 millimeter wrenches; some penetrating oil; a hammer; flat blade screwdriver; and a jack and jack stands.
Start by loosening the five plastic lug nut covers that hold the wheel cover to the wheel. For taking off the wheel, you'll be using that same 19 millimeter socket, but if you don't have the benefit of a lift or air tools, start with it on the ground. Loosen up your five lug nuts slightly. Get it safely on some jack stands and then proceed to remove the five lug nuts with your socket, socket wrench and breaker bar. Then take off your tire. I
'm going to turn the steering knuckle there a little bit so you can get a good look at the sway bar link, which is between the control arm and the sway bar. I'm using a 13 millimeter socket and socket wrench, on the bottom, and then I'm counter holding it with a 13 millimeter wrench up top, and I'm going to go ahead and fast forward as I loosen those up. The bolt that goes through the center there is quite corroded and sticking to the rubber bushing, so I'm going to use some penetrating oil. I'm going to try and separate the bushings and those washers, as well as the bolt that goes through the control arm, all the bushings, and the sway bar, using a flat, long screwdriver to try and get some room, and start to pull that away. Once I do, I can just use a hammer on the top and tap it out. As you pull everything out, you'll just want to remember the position of everything, how the bushings and the washers go in.
Here you'll see the old part, rusted and corroded, and the new part from 1A Auto. That, there, is how it will go back into the car. I'm going to start with a rubber bushing against the control arm and then a washer. On top of the washer I'm going to place the metal sleeve. I'm going to use the pry bar to lift up so that I can get, then, another rubber bushing, place it on top of the sleeve with a washer underneath it. As I lift it up then I can let it down and it'll fall right into place. I've got the bolt going from the bottom with a rubber bushing. It's got the bolt, then a washer and then the rubber bushing that's going to be sitting next to or against the control arm. You can see there. You might have to twist or pull some of the stuff to get it to line up so it goes through. Again, here, I'm using a hammer. I'm going to use the pry bar again to pry up on that sway bar to give me a little bit more room. Then once I get that pushed through, I'm going to put another rubber bushing and a washer, and then the nut. Then, to summarize, from the bottom up, you've got the bolt, washer, rubber bushing, control arm, rubber bushing, washer, sleeve, washer, rubber bushing, then the top of the sway bar, then a rubber bushing, a washer, and then the nut. I'll go ahead and fast forward as I use a 14mm wrench and a 14 millimeter socket and socket wrench to tighten up the sway bar link.
I'm reinstalling the wheel and I'm going to tighten by hand the five lug nuts. Then, once I do that, I'm going to tighten them back up with the impact wrench, and then as I get the car down, I'm going to use a 19 millimeter socket with a torque wrench, and torque all five lug nuts in a star pattern to 100 foot-pounds. Then, go ahead and reinstall your hub cab, lining up the notch in the hub cap with the valve stem, and then go ahead and tighten up those plastic lug nut covers
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace a front sway bar link on this 2003 Chevy Monte Carlo. We show you on the passenger's side, but the driver's side is the same procedure. The items you'll need include a new front sway bar link from 1AAuto.com, 13mm, 14mm and 19mm socket, a ratchet, a 14mm wrench, and jack and jack stands.
Start off by just loosening up these lug nut caps. Now you can remove your lug nuts. If you don't have air-powered tools you want to loosen these up while the vehicle's on the ground. Then raise the vehicle and remove them the rest of the way. If you do have air-powered tools, you can just remove them right here. For this repair it's important to note you have to have both wheels off the ground. You can't just jack one wheel up. It'll make this repair difficult.
Spray down the top of the link with some penetrating oil. Then use a 14mm wrench to hold the top, and a 14mm socket and ratchet on the bottom. Now, this actually comes apart easily. It's not uncommon, but sometimes the link is totally broken and you don't even have to do this step. You just pull the remains out. Also, sometimes they're frozen up so bad you have to use a saw or a torch to cut the links out. Pull the top bushings off and push the sway bar link down and out, and then remove the bushings in the center.
Take your sway bar link and put the center bushings in first. Then run your sway bar link up through the bushings. Then replace the top bushing, the washer, and the nut. Just twist that nut on. Once you have it on there securely, you want to lower your vehicle down onto the jack stands so that all the pressure is on the suspension. Then tighten up the sway bar the rest of the way.
Then replace your wheel and each of the lug nuts. You want to just tighten them preliminary, and then lower the vehicle and tighten them the rest of the way. Now torque each of these to a hundred foot-pounds in a crossing pattern. Then replace your hubcap and tighten up the lug nut caps.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Parts matched OEM and installed easily. Video included on the website was extremely helpful.
Part looked different from the OEM part, but it worked fine. The installation video associated with part, demonstrated the easy of installation and was helpful in making the determination to DIY verses taking it to the repair shop.
I've purchased multiple items from A1 Auto, I love them. They are very reasonably priced and the product is of great quality!
Wayyy better than Dorman. Gets rid of noise!
Fast delivery, perfect fit and great customer service!! I will be ordering again!!
I would definitely recommend this to anyone. I got them and they are awesome. They got put on my car and now it drives better than it ever did before. Thank you for all the help..
PSA55628
Thank you for your inquiry. Actual Measurements are not listed or available. Our parts are exact replacements for your vehicle's OEM parts. As long as your year, make, and model match up with our listing, these parts will directly fit and function like the originals. Please let us know if you have any other questions. Thank you!.
We do not have the torque for the sway bar links. Please check your Haynes Manual.
