2011 Ram 2500 Truck without Quad Headlights Driver & Passenger Side 2 Piece Performance Headlight Set DIY Solutions LHT09538

Those lights are amazing.I like the improvements I can see much better at the dark thank you.and I like the color off the product

Surprisingly high quality for the price. Made in Taiwan. Fully sealed rear for headlight reflector. The headlights use an adapter harness from the stock h13 connector to a 20 pin standard automotive connector. I had trouble getting a good connection with my tired old H13 connectors and was getting a weird backfeed short to my high beam circuit which was turning on my light bar relay. I ended up cutting off my stock connectors and soldering in the connectors for these headlights. The fit of the headlights themselves was perfect. One major downside is that the headlight adjusters are not in the stock location, so you either have to remove the headlight to adjust it, which doesn't work well because you are just guessing, or drill new holes in the tops of the fenders to access the adjustment bolt. I ended up going the latter route. Just make sure you put some paint on your holes to prevent rust. Overall I am happy given the price, quality, look. I really wish the beam pattern

I have a 2012 Dodge Ram 2500 Power Wagon, and these were a pretty easy install minus the connectors were not a direct fit. However, I was able to fine a conversion harness at autozone (Part#F90015) that made it a direct fit. I also noticed my stock headlights did not fit with the connectors and found a couple of options for that. Autozone also sells a wiring harness that will convert or use H13 9008 headlights. Hope this helps.

We were very pleased with these headlights! The pre alignment worked perfectly and we were able to use LED bulbs with the adapters we already had. The fit was excellent and they work perfectly!