Replaces
About TRQ:
TRQ is a trusted brand dedicated to making every repair a success story by combining premium parts with easy installation. Each TRQ part is engineered by a team of automotive experts to meet or exceed OEM standards, delivering enhanced performance and maximum longevity. With rigorous in-house testing, the brand ensures superior fit and function across every product line. TRQ also provides customers with best-in-class, step-by-step installation videos—so you can complete repairs with confidence, whether you're a first-time DIYer or an industry professional.
Returns: Parts with electrical components cannot be returned once installed.
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
This part fits 19 vehicles spanning 2002-2011.
| Year | Make | Model | Description |
|---|---|---|---|
| 2007-2009 | Chrysler | Aspen | Chrysler Aspen without Electronic Stability Control Turn Signal Combination Lever TRQ SWA41793 |
| 2005-2010 | Dodge | Dakota | Dodge Dakota Turn Signal Combination Lever TRQ SWA41793 |
| 2004-2005 | Dodge | Durango | Dodge Durango Turn Signal Combination Lever TRQ SWA41793 |
| 2006-2009 | Dodge | Durango | Dodge Durango without Electronic Stability Control Turn Signal Combination Lever TRQ SWA41793 |
| 2002-2006 | Dodge | Ram 1500 Truck | Dodge Ram 1500 Truck Turn Signal Combination Lever TRQ SWA41793 |
| 2007-2008 | Dodge | Ram 1500 Truck | Dodge Ram 1500 Truck without Electronic Stability Control Turn Signal Combination Lever TRQ SWA41793 |
| 2003 | Dodge | Ram 1500 Van | Dodge Ram 1500 Van without Delay Wipers Turn Signal Combination Lever TRQ SWA41793 |
| 2003-2006 | Dodge | Ram 2500 Truck | Dodge Ram 2500 Truck Turn Signal Combination Lever TRQ SWA41793 |
| 2007-2008 | Dodge | Ram 2500 Truck | Dodge Ram 2500 Truck without Electronic Stability Control Turn Signal Combination Lever TRQ SWA41793 |
| 2009 | Dodge | Ram 2500 Truck | Dodge Ram 2500 Truck Turn Signal Combination Lever TRQ SWA41793 |
| 2003 | Dodge | Ram 2500 Van | Dodge Ram 2500 Van without Delay Wipers Turn Signal Combination Lever TRQ SWA41793 |
| 2003-2006 | Dodge | Ram 3500 Truck | Dodge Ram 3500 Truck Turn Signal Combination Lever TRQ SWA41793 |
| 2007-2008 | Dodge | Ram 3500 Truck | Dodge Ram 3500 Truck without Electronic Stability Control Turn Signal Combination Lever TRQ SWA41793 |
| 2009 | Dodge | Ram 3500 Truck | Dodge Ram 3500 Truck Turn Signal Combination Lever TRQ SWA41793 |
| 2003 | Dodge | Ram 3500 Van | Dodge Ram 3500 Van without Delay Wipers Turn Signal Combination Lever TRQ SWA41793 |
| 2008-2010 | Dodge | Ram 4500 Truck | Dodge Ram 4500 Truck Turn Signal Combination Lever TRQ SWA41793 |
| 2008-2010 | Dodge | Ram 5500 Truck | Dodge Ram 5500 Truck Turn Signal Combination Lever TRQ SWA41793 |
| 2006-2009 | Mitsubishi | Raider | Mitsubishi Raider Turn Signal Combination Lever TRQ SWA41793 |
| 2011 | Ram | Dakota | Ram Dakota Turn Signal Combination Lever TRQ SWA41793 |
| Brand Label | Part Number |
|---|---|
| Mopar | 56049823AA |
| Standard Motor Products | CBS1338 |
| Wells | SW3998 |
| Chrysler | 56045165AB |
| Wells | 1S3716 |
| Standard Ignition | CBS-1338 |
| Standard Motor Products | CBS1188 |
| Duralast | SW3928 |
| Carquest Premium Vehicle Solutions | SAE1169 |
| PT Auto Warehouse | CBS3642 |
| Wells | SW6489 |
| Airtex Engine Management | 1S3642 |
| Wells | 53-16720 |
| Original Engine Management | TSS51 |
| Wells | SW3928 |
| Motorcraft | 3W1Z13K359BAB |
| SKP | SKCBS1188 |
| Duralast | SW7393 |
| Autopart International | 1802-304423 |
| Motorcraft | SW6524 |
| Motorcraft | SW6489 |
| Hollander | 629-00672L |
| Mopar | 56045165AB |
This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to install a turn signal and wiper switch. This is a 2008 Dodge Ram, but the procedure is pretty much the same for 2002 to 2008. Items you'll need are a new switch from 1AAuto.com, a T20 Torx driver, and a Phillips screwdriver.
Pull the lever on the bottom left only steering column. Tilt it all the way up to access the three T20 Torx screws on the bottom of the cone.
Using a T20 Torx screwdriver, remove the three screws. Remove the T20 Torx screw at the back of the tilt steering column lever. Pull off the tilt steering column lever.
Remove the rubber cover on the gear selector by prying out on the front edge. Slide it up onto the gear selector out of your way.
Carefully separate the upper and lower halves of the clam shell on the steering column. Place them off to the side.
Put the key into the ignition and into the run position without starting the vehicle. Turn the wheel until it will rest facing 9:00. Shut the key off so you can access these two Phillips-head screws, and remove them.
On the back of the multifunction switch, push out on the red safety tab, squeeze it and remove the connector. Lift up on the cover on top of the switch. Pull the switch out to the side.
Here we have our old part from the vehicle, and our new part from 1AAuto.com. Exact same part, same size, same mounting locations, the same graphics on the switch. The new switch is a lot brighter, looks nice and fresh.
There's a small difference here with the reset for the turn signals. Ours is a different color, but it still fits in. We have the same connector on the back. This new part from 1A Auto is going to go right in, direct fit like your original part, and will fix you up right.
Line up your new switch. Slide it until it snaps into place. Reconnect the connector on the back of the switch. Pops in, followed by snapping the safety into the locked position.
Reinstall your two Phillips head screws. Just before we go too far reassembling the steering column, we're going to take two seconds to turn the key to the run position. Make sure that all your functions work, turn signals, high beam switch, hazards, windshield washers, and all the various wiper speeds before reinstalling the clam shell on the steering column.
Put the lower half of the steering column clam shell back into position. Make sure it snaps around the ignition cylinder for the key.
Reinstall the top half of the clam shell. Be sure that this dust cover sits inside of the clam shell and your switch, and that the hazard button sticks through properly. This all snap back into place.
Reinstall your tilt column lever. Make sure that the two plastic studs on the back of the lever line up with the holes on the steering column.
Reinstall your T20 screw. Reinstall the three T30 Torx screws.
Reinstall the rubber dust cover for the gear selector by sliding the gear cluster side into the clam shell, snapping the side closest to you back into place.
Thanks for tuning in. We hope this video helped you out. Next time you need parts for your car, please visit 1AAuto.com. Also check out our other helpful how-to and diagnosis videos.
SWA41793
The intermittent feature of the switch dos not work. Will source another replacement
I'm so glad I found this sight! Shipping was faster then anywhere else and it was the cheapest I could find. I installed it and it fixed my problem, I have zero complaints. Five star review forsure.
Turn signal fails to turn off some of the time.
Awesome.perfect fit
Fit as it advertised
Worked great. The video on how to do the install was critical made it easy.
Fits perfect. The video show exactly how to replace it and fixed my issue of my right side turn signals not working. Thanks!
Great product. Easy installation. Showed up on time great customer service. Really everything you'd want when ordering parts!! Thanks 1A Auto!
1A Auto always has the best videos to show me how to do the work and they always have the parts, delivered quickly.
Works good.
It worked fine for me
Good possibility itll fix your issue, after years of current going through the circuit boards in the switch will melt causing all sorts of issues. I used to have to hit my steering column just to get mine to work before I replaced it.
The lone I purchased for my 2006 Dodge Ram had the delay function
Please contact your dealer with your VIN number and they can tell you if your vehicle has this or not.
We have a few different aftermarket companies build these parts specifically for us, as our 1A Auto house brand. They are manufactured to the same OEM specifications as the original part that came with your vehicle. If you have any further questions, please don't hesitate to ask.
