★★★★★
June 17, 2026
same as above
Again perfect fit on time great service
Replaces
Part Details
About TRQ:
TRQ is a trusted brand dedicated to making every repair a success story by combining premium parts with easy installation. Each TRQ part is engineered by a team of automotive experts to meet or exceed OEM standards, delivering enhanced performance and maximum longevity. With rigorous in-house testing, the brand ensures superior fit and function across every product line. TRQ also provides customers with best-in-class, step-by-step installation videos—so you can complete repairs with confidence, whether you're a first-time DIYer or an industry professional.
Our direct fit gas-charged strut assemblies help to restore your vehicle’s handling and ride quality to just like new.
Our direct fit gas-charged shock absorbers help restore your vehicle's handling and ride quality to just like new.
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
This part fits 14 vehicles spanning 2002-2008.
| Year | Make | Model | Description |
|---|---|---|---|
| 2002-2003 | Dodge | Ram 1500 Truck | Dodge Ram 1500 Truck Rear Wheel Drive Front & Rear 4 Piece Shock Absorber Set TRQ SBA60204 |
| 2004-2005 | Dodge | Ram 1500 Truck | Dodge Ram 1500 Truck Laramie Rear Wheel Drive Front & Rear 4 Piece Shock Absorber Set TRQ SBA60204 |
| 2004-2005 | Dodge | Ram 1500 Truck | Dodge Ram 1500 Truck SLT Rear Wheel Drive Front & Rear 4 Piece Shock Absorber Set TRQ SBA60204 |
| 2004-2005 | Dodge | Ram 1500 Truck | Dodge Ram 1500 Truck ST Rear Wheel Drive Front & Rear 4 Piece Shock Absorber Set TRQ SBA60204 |
| 2006 | Dodge | Ram 1500 Truck | Dodge Ram 1500 Truck ST Crew Cab Rear Wheel Drive Front & Rear 4 Piece Shock Absorber Set TRQ SBA60204 |
| 2006 | Dodge | Ram 1500 Truck | Dodge Ram 1500 Truck ST Regular Cab Rear Wheel Drive Front & Rear 4 Piece Shock Absorber Set TRQ SBA60204 |
| 2006 | Dodge | Ram 1500 Truck | Dodge Ram 1500 Truck Sport Regular Cab Rear Wheel Drive Front & Rear 4 Piece Shock Absorber Set TRQ SBA60204 |
| 2006 | Dodge | Ram 1500 Truck | Dodge Ram 1500 Truck Sport Crew Cab Rear Wheel Drive Front & Rear 4 Piece Shock Absorber Set TRQ SBA60204 |
| 2006 | Dodge | Ram 1500 Truck | Dodge Ram 1500 Truck SLT Crew Cab Rear Wheel Drive Front & Rear 4 Piece Shock Absorber Set TRQ SBA60204 |
| 2006 | Dodge | Ram 1500 Truck | Dodge Ram 1500 Truck SLT Regular Cab Rear Wheel Drive Front & Rear 4 Piece Shock Absorber Set TRQ SBA60204 |
| 2006 | Dodge | Ram 1500 Truck | Dodge Ram 1500 Truck Laramie Crew Cab Rear Wheel Drive Front & Rear 4 Piece Shock Absorber Set TRQ SBA60204 |
| 2006 | Dodge | Ram 1500 Truck | Dodge Ram 1500 Truck Laramie Regular Cab Rear Wheel Drive Front & Rear 4 Piece Shock Absorber Set TRQ SBA60204 |
| 2007-2008 | Dodge | Ram 1500 Truck | Dodge Ram 1500 Truck Regular Cab Rear Wheel Drive Front & Rear 4 Piece Shock Absorber Set TRQ SBA60204 |
| 2007-2008 | Dodge | Ram 1500 Truck | Dodge Ram 1500 Truck Crew Cab Rear Wheel Drive Front & Rear 4 Piece Shock Absorber Set TRQ SBA60204 |
| Brand Label | Part Number |
|---|---|
| KYB | 344398 |
| KYB | 344385 |
| Monroe Shocks & Struts | 37164 |
| Monroe Shocks & Struts | 37207 |
| Monroe Shocks & Struts | 37206 |
| Chrysler | 52853460AE |
| Gabriel | G63662 |
| Chrysler | 52855791AC |
| KYB | KG54342 |
| Unity Automotive | 256010 |
| Unity Automotive | 213210 |
| Monroe Shocks & Struts | 34690 |
| Mopar | 5072921AD |
| Mopar | 5093252AC |
| Mopar | 5072923A |
| PRT | 173698 |
This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacements parts and the best service on the internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out and next time you need parts for your vehicle, think of 1aauto.com. Thanks.
In this video we're going to show you how to replace the rear shocks on this 2002 GMC 2500. The only tools you'll need for this job are two 21mm wrenches either a large wrench or two sockets with a ratchet and a breaker bar.
You don't even have to raise the vehicle. You definitely don't have to take off the rear wheels. You don't even have to raise the vehicle you just need to secure it with blocks and you can actually just crawl underneath and replace the shocks without even lifting up the vehicle. Although lifting up the vehicle does make it a little easier.
You can see I got the truck on the lift. I also got the rear end supportive. You basically want to jack your truck up. The best place to jack your truck up is here and then you can put a safety jack stand under here on each side or you can actually put safety stands right underneath the axle tubes right here, that's probably the best place then put all the weight on the axle.
I have it supported here for two reasons, for safety and also pushing up on the axle a little bit contracts the shocks some which takes some of the pressure off of them. Basically when you have all the weight off of the axle or the axle hanging down, the shocks are actually what's holding it up. You don't want to have the axle hanging down and then just crank the shocks because then your rear end is going to fall down further.
Start by spraying penetrating oil on the bolts, this side and the other side. We're going to replace both shocks at once. Always replace shocks in pairs. Working on this little bolt first, you got to want either a breaker bar, 21mm socket. You can also use a ratchet with a pipe on it. That gives you some extra leverage. I'll use the breaker bar here and get this on the right way. It seems to come apart pretty easily. Swap the pipe around. I'll speed it up here. I take the nut off but I don't remove the bolt from the shock yet. Hope for the same results. Bolt's turning.
Here again I'll just speed it up as I'm working those wrenches and removing the nut from the end of the bolt.
Going back down here. At this step if you got the rear end, if you actually are working on the ground you can do this without even jack and jack stands. At this point be very careful, as you pull this bolt out the shock may want to go down.
Mine are in pretty rough shape. We're not even doing much still the bolt has come right out.
Just for reference, here's my old shock. If you press it down. It pretty much stays down. On the new shock, you can see it has band on it. If you press it down it actually slowly comes up.
I pull my old shock up. You can see I can just press right down and it just takes a whole lot more force on the new shock.
With the new shock, put it up there in place. You put the bolt through and the spot on the nut. Now swing this into place, and on.
From here on out I'm just going to use fast forward. Use your breaker bar and your ratchet to tighten them up. Basically tighten them up as tight as you can with that ratchet. That's good. These bolts should be probably torqued to about 70 to 75 foot-pounds. Once you have them all tighten up, obviously replace the other side. Your car would be riding smoother down the road.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the internet. Please feel free to call us toll free 888-844-3393. We're the company that's here for you on the internet and in person.
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the rear shock absorbers in a 2008 Dodge Ram pickup. This is for non-mega cab trucks. The items you're going to need for this repair include a pair of rear shocks from 1AAuto.com, we do recommend you do these the same way we do the struts or any other suspension component, replacing in pairs, and you'll need a 21mm and a 22mm deep socket, some extensions, a ratchet, a breaker bar, a 21mm wrench, and a torque wrench. You're also going to want a jack and a set of jack stands.
With the vehicle on the ground, using a 22mm socket and breaker bar, break the lug nuts for your wheel loose. These chrome lug nuts tend to be swollen, so make sure your socket's on there good. Once your lug nuts are loose, raise and support the vehicle with the jack and jack stands. This wheel and tire assembly, being a big off-road tire and 20 inch wheel, it's going to be real heavy, so we're only going to bring it up a little bit when we take it off. Remove the wheel and tire from the hub.
Remove the bottom bolt for the rear shock using a 21mm wrench, a 21mm socket, and breaker bar. After you break the nut loose, you can switch to a ratchet. Remove the bottom bolt. Sometimes if they get really stuck on there, you can rotate the ratchet up and just hold it against the bottom of the axle so you don't have to strain your other hand to hold the bolt steady. Remove the nut and push the bolt through.
Use your 21mm wrench to hold the nut on the back side of the upper shock bolt. Using a 21mm socket and extension and a breaker bar, we're going to brace the wrench against the bottom of the bed there. After we've broken the bolt loose, we'll switch over to a ratchet to get it out faster. Remove the nut on the back first, support the shock, remove the upper bolt, and remove the shock from the vehicle.
Here we have our old part that we removed from our vehicle. This is an aftermarket replacement, this is not the OEM part that we took out. Here we have our new part from 1AAuto.com. These come shipped with this little band on them to keep them compressed, which makes them smaller and easier to package. All you have to do is push down, remove that, what you'll see is exactly the same as our old part.
Reinstall the top of the shock into the upper mount. Send your bolt through, and start the nut on the back. Before tightening, we'll also line up our lower shock mount, setting that bolt as well. It may help if you spin it a little with a ratchet to help center everything up nicely. Be sure that it's not fighting, or that means that it could be bound up against a thread and strip out your bolt. Start that nut as well. Support the nut on the back of your upper shock with a 21mm wrench. Use that socket ratchet and extension to tighten up the bolt.
If you've rested the wrench against the frame to support it while you tighten up with the socket and ratchet, you want to lift that up and hold it now so it doesn't get locked against there, and torque to 100 foot-pounds. Tighten up the bottom bolt with the same socket, ratchet, and wrench. Torque to 100 foot-pounds.
Start your lug nuts by hand. Tighten the lugs as far as you can. Remember to bring the wheel down evenly and always tighten in a cross pattern. Once the lugs are as tight as you can get them with the tire in the air, put partial weight of the vehicle on the ground by lowering it off your jack stands. Torque your lug nuts to 135 foot-pounds in a cross pattern.
Thanks for tuning in. We hope this video helped you out. Next time you need parts for your car, please visit 1AAuto.com. Also check out our other helpful how-to and diagnosis videos.
SBA60204
Again perfect fit on time great service
Perfect
Very nice my truck ride very smooth won't bounce anymore tanks I love it
Worked good
Works great..
they work
Shipment came pretty quick and items as described packed well. Overall improved my suspension from my blown out shocks that were currently in there. Would recommend if your on a budget.
Great fit ..Just unbolt and bolt back up..
Perfect fit
Front shocks didn't have a cover over the stainless steel rod and they are not as heavy duty as the OEM parts.
Yes, this part will fit your vehicle.
We do not have a specific country of origin for our parts at this time.
We would be happy to check. What is the year, make and model of your vehicle? Does it have 4WD or RWD and what is the cab type?
These will not work. These are meant for the vehicles with the stock ride height only.
Hello, This kit includes the shocks for the front and the rear of the vehicle. Thanks!
