★★★★★
December 9, 2024
Always happy with the product
Replaces
6 Piece Steering & Suspension Kit
$81.95
4 Piece Control Arm with Ball Joint Set
$124.95
10 Piece Steering & Suspension Kit
$169.95
12 Piece Steering & Suspension Kit
$184.95
8 Piece Suspension Kit
$224.95
12 Piece Steering & Suspension Kit
$254.95
14 Piece Steering & Suspension Kit
$349.95
18 Piece Steering & Suspension Kit
$619.95
18 Piece Steering, Suspension, & Drivetrain Kit
$649.95
Part Details
Specifications
About TRQ:
TRQ is a trusted brand dedicated to making every repair a success story by combining premium parts with easy installation. Each TRQ part is engineered by a team of automotive experts to meet or exceed OEM standards, delivering enhanced performance and maximum longevity. With rigorous in-house testing, the brand ensures superior fit and function across every product line. TRQ also provides customers with best-in-class, step-by-step installation videos—so you can complete repairs with confidence, whether you're a first-time DIYer or an industry professional.
An adjustable ball joint will look slightly different than a standard, non-adjustable version. The stud will be offset once installed and can be rotated to allow a greater range of vehicle suspension alignment.
Our steering and suspension components are pre-greased and sealed for long life and do not require the extra maintenance typically required by greaseable versions.
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
PSA63204
Always happy with the product
Excellent part. Great quality. I personally believe it was better than the original manufacturer part!!
Im so happy with the lower ball joints They fit perfectly, vary fast shipping Works great Thank you
Great product, significantly improving driving performance. Along with the coustumer service my experience was phenomenal! Thanks again 1Aauto.
I have a 2006 Dodge Daytona Charger r/t with higher mileage I needed to replace these lower ball joints that press in to the steering knuckle. Price was great and recieved these on time. I'm a DYI guy so it was imperative I got the correct parts. FYI you will need a steering knuckle press to install these parts.
There are two on each side upper and lower These are the lower set
Actual Measurements are not listed or available. Our parts are exact replacements for your vehicle's OEM parts. As long as your year, make, and model match up with our listing, these parts will directly fit and function like the originals.
You need to press them in with a with a ball joint service kit the bottom should protrude out about 16th of inch or so to get the clip on you will need another tool looks kinda like a pliers to install hope this helps
No this is only for the front lower control arm.
These are the ball joints that mount on the steering knuckle.
Thank you for the inquiry. These ball joints are listed to fit your vehicle. Please let us know if you have any additional questions.
Thanks for your inquiry. This item is an aftermarket item that does not require the cotter pin. Written and video installation instructions are found on the product page under the "How-To & Tools" tab. We're constantly adding new installation video instructions. If we do not have one for your vehicle on the product listing page, please check again at a later time or check our Video Library to see similar repairs here: <a href="https://www.1aauto.com/videos" target="_blank">https://www.1aauto.com/videos</a>
Since these adjustable ball joints are revised from the original design, they will sit differently than the OE versions. A small gap at the spindle is normal.
They will adjust by loosening the nut. When they are mounted in the steering knuckle they will be held in place. Thanks!
