Replaces
Part Details
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and the next time you need a part for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace an outer door handle assembly on a 2007 Pontiac G6. It's fundamentally the same for model years 2007 through 2010. I used a T25 Torx socket and extension of socket wrenches, as well as a flat blade screwdriver.
Remove the rubber cover, locate the T25 Torx screw that's in the hole. I'll fast-forward as I take that screw out. Pull out on the handle and then off with the little cover. Now, in removing the handle, slide it back till it clicks, and then pull out the front portion a little bit, and then all the way out. Then, you're just going to need to turn it a little bit to get it to come out fully.
You can remove the rubber and install the rubber gasket. Put the back end of the handle in, twisting it in, then pushing it on the front, and then slide it forward. Pull out the handle and slide the cap back on.
Be careful when reinstalling the T25 Torx screw in the handle that you don't drop it inside the door panel. Fast-forward a little bit as we tighten that up, and you can see that we just took off the original door handle and put it back on. This car didn't need a new door handle. At 1A Auto, we sell both black door handles that you can paint to match if you wanted to. We also sell chrome door handles, and we sell those in sets of four if you wanted to upgrade your G6 to chrome door handles. Put the rubber cap back on.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
