WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How to Replace Exterior Door Handle 2004-12 Chevy Malibu
Created on:
Tools used
T25 Torx Driver
1. Removing the Door Handle
Pull the screw cover plug out of the door
Remove the T25 Torx screw from the door
Pull the door handle
Pull off the door lock bezel
Pull the door handle back and off
2. Installing the New Door Handle
Put the new door handle into place
Slide the door handle back
Pull the door handle
Push the door lock bezel into place
Insert the T25 screw into the door
Push the screw cover plug into place
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
In this video, we're going to show you outside door handle replacement on this 2006 Malibu, same as the Malibus of this vintage as well as other GM vehicles. The only tool you'll need is a T25 Torx driver. You may want to do this if your door handle breaks or if you want to upgrade to chrome door handles.
There's a little plug here. Pull that out. Use a T25 Torx wrench and you can see a screw kind of diagonally in here. We'll remove that. We'll speed it up here as I'm just unscrewing that T25 Torx screw. I'll put out on the handle. I'm going to pull out on this here. It just comes right out. Go back with the handle and right out.
Reinstallation is just the reverse. Have the handle back, put it in, slide it forward, and you can pull it out, re-insert that part of the handle. Take your Torx screw. It's right in.Tighten it nice and firm and then put your cap back in.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
DHA48663
In Stock
Product Reviews
Loading reviews
4.67/ 5.03
3 reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
1
0
0
0
Exterior door handle
Paul
July 7, 2017
The door handle fit perfectly and the installation video was excellent (saved me a lot of time trying to figure out how the handle was attached). I did drop one of the screws, requiring that I remove the door panel to fish it out (my issue not the instructions, next time I would use a magnetic tip)
2006 Equinox Rear outside door handle
Mark
February 13, 2020
The handle is good quality and looks great now it has been installed. Very pleased with it and the installation video on YouTube.
Michael
June 9, 2023
Parts fit perfectly and video was spot on for removal and installation.
Customer Q&A
No questions have been asked about this item.
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Chevrolet is a registered trademark of General Motors Company. 1A Auto is not affiliated with or sponsored by Chevrolet or General Motors Company.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.