★★★★★
July 15, 2024
Great
Great product
Replaces
Replaces Chevrolet Pontiac Saturn Front 12 Piece Steering & Suspension Kit TRQ PSA59353
$409.95
Replaces Chevrolet Pontiac Saturn Front 10 Piece Steering & Suspension Kit TRQ PSA58835
$404.95
Replaces Chevrolet Pontiac Saturn Front 8 Piece Steering, Suspension, & Drivetrain Kit TRQ PSA56382
$319.95
Replaces Chevrolet Pontiac Saturn Front 8 Piece Steering & Suspension Kit TRQ PSA59743
$263.95
Replaces Chevrolet Pontiac Saturn Front 10 Piece Steering & Suspension Kit TRQ PSA58970
$244.95
Replaces Chevrolet Pontiac Saturn Front 8 Piece Steering & Suspension Kit TRQ PSA58795
$229.95
Replaces Chevrolet Pontiac Saturn Front 6 Piece Steering & Suspension Kit TRQ PSA56248
$224.95
Replaces Chevrolet Pontiac Saturn Front 6 Piece Steering & Suspension Kit TRQ PSA59564
$219.95
Replaces Chevrolet Pontiac Saturn Front 6 Piece Steering & Suspension Kit TRQ PSA59732
$209.95
Replaces Chevrolet Pontiac Saturn Front 4 Piece Steering & Suspension Kit TRQ PSA85763
$199.95
Replaces Chevrolet Pontiac Saturn Front 6 Piece Steering & Suspension Kit TRQ PSA58762
$79.95
Replaces Chevrolet Pontiac Saturn Front 6 Piece Steering Kit TRQ PSA58512
$69.95
Replaces Chevrolet Pontiac Saturn Front 4 Piece Tie Rod Set TRQ PSA55050
$59.95
Replaces Chevrolet Pontiac Saturn Front 4 Piece Steering & Suspension Kit TRQ PSA59914
$59.95
Replaces Chevrolet Pontiac Saturn Front Driver & Passenger Side 2 Piece Tie Rod Set TRQ PSA54986
$44.95
Part Details
Specifications
About TRQ:
TRQ is a trusted brand dedicated to making every repair a success story by combining premium parts with easy installation. Each TRQ part is engineered by a team of automotive experts to meet or exceed OEM standards, delivering enhanced performance and maximum longevity. With rigorous in-house testing, the brand ensures superior fit and function across every product line. TRQ also provides customers with best-in-class, step-by-step installation videos—so you can complete repairs with confidence, whether you're a first-time DIYer or an industry professional.
Install Tip: When replacing steering components, have a professional alignment performed afterwards. This ensures proper tracking and even tire wear.
Our steering and suspension components are pre-greased and sealed for long life and do not require the extra maintenance typically required by greaseable versions.
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and the next time you need a part for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace an outer tire rod on this 2007 Pontiac G6. It's pretty much the same as any 2005 to 2010 G6, as well as a Saturn Aura. We show you the right-hand or passenger side, but the left-hand driver side is the same procedure. You'll need a new tie rod or tie rods from www.1AAuto.com, jack and jack stands, 18mm and 19mm sockets with a socket wrench, maybe even a breaker bar or a pipe for leverage, tape measure, 18mm wrench, large adjustable or a 13/16 wrench, hammer, and a torque wrench.
Depending on what wheels you have, start out be removing the lug caps, and then we'll cover if applicable. Then, if you don't have the benefit of air tools, you're going to want to loosen the lug nuts with the vehicle on the ground. Then raise and support the vehicle. I'll remove the lug nuts, wheel, and tire.
Use a tape measure to get a general idea of a total length. You can use a reference point of the outer part of the boot, and then the outer part of the tie rod end, and just remember that number. On the end of the tie rod is an 18mm, so I'm using the socket and socket wrench to remove that nut. I'll fast-forward as I take off that nut.
Locate the nut at the end of the outer tire rod. We're going to go ahead and just loosen it just a little bit. I'm using a 13/16 wrench. You can use the metric equivalent. With a hammer, go ahead and give the end of that spindle a whack and pull the outer tie rod out. Then you can go ahead and unscrew it. I'll fast-forward through that. Be as careful as you can to not turn the inner tie rod.
Here, we're going to reinstall. You'll notice we are reinstalling the old one. There's nothing wrong with the tie rods on this vehicle. We just are doing this to show you how to do it. Tie rods from 1A Auto are going to be an exact match to the original. You may want to just measure the length. There could be a slight difference in length, and you would want to make sure you align it well.
Go ahead and put that 18mm nut back on the outer tire rod. I'm using a small pair of vice grips to hold the other part of the ball joint so that it doesn't spin as I tighten up that 18mm nut. There might be other ways that you would find easier to do it, but that's the one that I use. Then once I get it through, I'll be able to put the vice grip on the end that's coming through the nut. You can see here that once I take that socket off, I'll have plenty of room to put that on, and then use an open-ended wrench.
Here, I'm using that vice grip on the bottom, and I'm going to use an open-ended wrench to finish up tightening it up. I'll fast-forward through this. Now tighten up the nut on the inner tie rod that we just slightly loosened. Make sure that's snug up against the back portion of that outer tie rod. I'm just verifying that the tire rod is in somewhat of a right position, and it will be ready for me to take over to have an alignment done.
Install the wheel, and tighten up on your lug nuts. I'll go ahead and fast-forward through this. In a star pattern, go ahead and torque your lug nuts to roughly 100 foot-pounds. Reinstall your hubcap, and make sure that you line up the notch in the hubcap for where your valve stem is. Then, by hand, use your 19mm socket to tighten up those plastic lug nut covers. I'll fast-forward through that.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Great product
The parts fit good the tool was bit aggravating to use having to tighten it up and then get a 1/4turn remove repeat a few times. The kit doesn't come with the rubber boots for the inner tie rod ends and my local parts stores don't sell them
Just what I ordered. Thank you.
Im referring everyone i know to 1A Auto for the simply fact my parts showed up before their due date as well as went together with ease. Im shopping here more often Thank You 1A Auto
Better than OEM. Needed new tierods installed easily and took alignment with no problems
The brand of this part is TRQ. They stand for Trusted Reliable Quality and it will come with a lifetime warranty.
Hey Mike, They are made in China.
The tool included in this kit is specifically for the inner tie rods and certainly makes the job easier to do if you are doing it yourself. If you are taking your vehicle to a mechanic they should have all of the necessary tools for the job. Please contact us if you have any further questions.
