★★★★★
May 7, 2025
Good
Replaces
About TRQ:
TRQ is a trusted brand dedicated to making every repair a success story by combining premium parts with easy installation. Each TRQ part is engineered by a team of automotive experts to meet or exceed OEM standards, delivering enhanced performance and maximum longevity. With rigorous in-house testing, the brand ensures superior fit and function across every product line. TRQ also provides customers with best-in-class, step-by-step installation videos—so you can complete repairs with confidence, whether you're a first-time DIYer or an industry professional.
Install Tip: When replacing steering components, have a professional alignment performed afterwards. This ensures proper tracking and even tire wear.
Our steering and suspension components are pre-greased and sealed for long life and do not require the extra maintenance typically required by greaseable versions.
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
This part fits 3 vehicles spanning 2004-2012.
| Year | Make | Model | Description |
|---|---|---|---|
| 2004-2012 | Chevrolet | Malibu | Chevrolet Malibu Front Inner & Outer 4 Piece Tie Rod Set TRQ PSA55050 |
| 2005-2010 | Pontiac | G6 | Pontiac G6 Front Inner & Outer 4 Piece Tie Rod Set TRQ PSA55050 |
| 2007-2009 | Saturn | Aura | Saturn Aura Front Inner & Outer 4 Piece Tie Rod Set TRQ PSA55050 |
| Brand Label | Part Number |
|---|---|
| MOOG Chassis Products | ES800086 |
| MOOG Chassis Products | EV80988 |
| DIY Solutions | SUS01913 |
| DIY Solutions | SUS07656 |
| DIY Solutions | SUS07657 |
| General Motors | 22687089 |
| General Motors | 22687091 |
| General Motors | 15944090 |
| General Motors | 15944097 |
| General Motors | 15944072 |
| Mevotech | MES800086 |
| Mevotech | MEV80988 |
| Mevotech Supreme | MEV80988 |
| Mevotech Supreme | MES800086 |
This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and the next time you need a part for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace an outer tire rod on this 2007 Pontiac G6. It's pretty much the same as any 2005 to 2010 G6, as well as a Saturn Aura. We show you the right-hand or passenger side, but the left-hand driver side is the same procedure. You'll need a new tie rod or tie rods from www.1AAuto.com, jack and jack stands, 18mm and 19mm sockets with a socket wrench, maybe even a breaker bar or a pipe for leverage, tape measure, 18mm wrench, large adjustable or a 13/16 wrench, hammer, and a torque wrench.
Depending on what wheels you have, start out be removing the lug caps, and then we'll cover if applicable. Then, if you don't have the benefit of air tools, you're going to want to loosen the lug nuts with the vehicle on the ground. Then raise and support the vehicle. I'll remove the lug nuts, wheel, and tire.
Use a tape measure to get a general idea of a total length. You can use a reference point of the outer part of the boot, and then the outer part of the tie rod end, and just remember that number. On the end of the tie rod is an 18mm, so I'm using the socket and socket wrench to remove that nut. I'll fast-forward as I take off that nut.
Locate the nut at the end of the outer tire rod. We're going to go ahead and just loosen it just a little bit. I'm using a 13/16 wrench. You can use the metric equivalent. With a hammer, go ahead and give the end of that spindle a whack and pull the outer tie rod out. Then you can go ahead and unscrew it. I'll fast-forward through that. Be as careful as you can to not turn the inner tie rod.
Here, we're going to reinstall. You'll notice we are reinstalling the old one. There's nothing wrong with the tie rods on this vehicle. We just are doing this to show you how to do it. Tie rods from 1A Auto are going to be an exact match to the original. You may want to just measure the length. There could be a slight difference in length, and you would want to make sure you align it well.
Go ahead and put that 18mm nut back on the outer tire rod. I'm using a small pair of vice grips to hold the other part of the ball joint so that it doesn't spin as I tighten up that 18mm nut. There might be other ways that you would find easier to do it, but that's the one that I use. Then once I get it through, I'll be able to put the vice grip on the end that's coming through the nut. You can see here that once I take that socket off, I'll have plenty of room to put that on, and then use an open-ended wrench.
Here, I'm using that vice grip on the bottom, and I'm going to use an open-ended wrench to finish up tightening it up. I'll fast-forward through this. Now tighten up the nut on the inner tie rod that we just slightly loosened. Make sure that's snug up against the back portion of that outer tie rod. I'm just verifying that the tire rod is in somewhat of a right position, and it will be ready for me to take over to have an alignment done.
Install the wheel, and tighten up on your lug nuts. I'll go ahead and fast-forward through this. In a star pattern, go ahead and torque your lug nuts to roughly 100 foot-pounds. Reinstall your hubcap, and make sure that you line up the notch in the hubcap for where your valve stem is. Then, by hand, use your 19mm socket to tighten up those plastic lug nut covers. I'll fast-forward through that.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Good
Nice really good parts thanks
Been using parts from A1 for over a year now haven't had any problems at all still going good entire suspension on 06 Malibu ltz .. highly recommend and they are half the cost compared to parts stores .
It was a great buy.
The parts came super quick and they were super nice when I needed a refund for the wrong part. The refund was back on my card in just a few days! I will always check this site first for anything I need and would 100% recommend these guys!
You can't beat the service, speed and quality of 1A auto. I'm a returning customer and will continue to be one. My recent purchase of outer and inner tie rods are a perfect match and of high quality.
Great company, Great products! Will be shopping with them for any part I need.
Fit perfect great price, received parts faster than I expected.
Oem fit
I would definitely recommend 1AAUTO to anyone, they've got great quality products. I was very pleased with my purchase, they were of great quality and at a very reasonable price. They worked great after install and fit perfectly.
PSA55050
Yes, this part will fit your vehicle.
Expedited shipping depends on your location. You will be able to see the options and cost once you enter your zip code at check out.
Hello, thank you for your question. There could be a couple of reasons your part doesn't match our images. There could have been a slight design change in the tie rods, or our part may not be listed to fit your vehicle. We would be happy to help further if you could supply your VIN#.
If you should decide that you do not want an item that is still in brand new condition you may return it to us within 60 days of the original purchase date. Please fill out our Online Return Form, email us or call us first to arrange the return. Upon receipt we will issue a full refund.
The outer tie rod nut should be 18 lb ft, and the inner is 74 lb ft.
They say you need a special inner tool but as soon as you remove the protection boot then you expose the inner tierod amd you can notice two smooth grooves on opposite sides .. You get a good pair of channel locks and a lil elbow greese it pops off so smoothly and then when you install dont forget to greese the inner tie rod and shazaam! Your good to go. I Recommend buying the industrial size zip ties to go around the boot . enjoy
