Replaces
Frequently bought together
Returns: Parts with electrical components cannot be returned once installed.
Left Hand Drive:
All of our auto parts are intended for Left Hand Drive USDM vehicles. If your vehicle is Right Hand Drive, please ensure the part is correct for your specific vehicle.
Attention California Customers:
WARNING: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and the next time you need a part for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the cabin air blower motor for a 2000 Chevy Cavalier. It's same operation for 1999 through 2005. You'll need a 7/32 socket, a socket wrench, and a new blower motor from 1A Auto.
You'll find the blower motor located in the passenger compartment foot well right below the glove box. You can see here there are three 7/32 screws that hold it in, and we're going to go ahead and remove those. Here, I'm using a 1/4 inch ratchet with a 7/32 socket, and I will fast-forward as I remove those three screws.
Find the connector there, and pull up on the tab and pull the connector out. Here's a side-by-side comparison of the old part and new part from 1A Auto. It's a direct replacement fit part.
To reinstall the blower motor, plug it in first and have the plug towards the back. Then go ahead and screw in your three 7/32 screws. I'll go ahead and fast-forward as I finish tightening those up.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
HMA84811
