★★★★★
June 19, 2025
Works as intended. Fit perfect! Looks original.
Replaces
Part Details
Specifications
About TRQ:
TRQ is a trusted brand dedicated to making every repair a success story by combining premium parts with easy installation. Each TRQ part is engineered by a team of automotive experts to meet or exceed OEM standards, delivering enhanced performance and maximum longevity. With rigorous in-house testing, the brand ensures superior fit and function across every product line. TRQ also provides customers with best-in-class, step-by-step installation videos—so you can complete repairs with confidence, whether you're a first-time DIYer or an industry professional.
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
This part fits 36 vehicles spanning 2007-2022.
| Year | Make | Model | Description |
|---|---|---|---|
| 2007-2013 | Chevrolet | Avalanche | Chevrolet Avalanche without Off Road Package Driver Side Fog Light TRQ LTA35373 |
| 2007-2013 | Chevrolet | Avalanche | Chevrolet Avalanche without Off Road Package Passenger Side Fog Light TRQ LTA35373 |
| 2013 | Chevrolet | Camaro | Chevrolet Camaro SS without RS Package Passenger Side Fog Light TRQ LTA35373 |
| 2013 | Chevrolet | Camaro | Chevrolet Camaro LT without RS Package Passenger Side Fog Light TRQ LTA35373 |
| 2013 | Chevrolet | Camaro | Chevrolet Camaro LT without RS Package Driver Side Fog Light TRQ LTA35373 |
| 2013 | Chevrolet | Camaro | Chevrolet Camaro SS without RS Package Driver Side Fog Light TRQ LTA35373 |
| 2015-2022 | Chevrolet | Colorado | Chevrolet Colorado Passenger Side Fog Light TRQ LTA35373 |
| 2015-2022 | Chevrolet | Colorado | Chevrolet Colorado Driver Side Fog Light TRQ LTA35373 |
| 2015-2019 | Chevrolet | Silverado 2500 HD | Chevrolet Silverado 2500 HD Passenger Side Fog Light TRQ LTA35373 |
| 2015-2019 | Chevrolet | Silverado 2500 HD | Chevrolet Silverado 2500 HD Driver Side Fog Light TRQ LTA35373 |
| 2015-2019 | Chevrolet | Silverado 3500 HD | Chevrolet Silverado 3500 HD Passenger Side Fog Light TRQ LTA35373 |
| 2015-2019 | Chevrolet | Silverado 3500 HD | Chevrolet Silverado 3500 HD Driver Side Fog Light TRQ LTA35373 |
| 2007-2014 | Chevrolet | Suburban 1500 | Chevrolet Suburban 1500 without Off Road Package Passenger Side Fog Light TRQ LTA35373 |
| 2007-2014 | Chevrolet | Suburban 1500 | Chevrolet Suburban 1500 without Off Road Package Driver Side Fog Light TRQ LTA35373 |
| 2007-2013 | Chevrolet | Suburban 2500 | Chevrolet Suburban 2500 without Off Road Package Passenger Side Fog Light TRQ LTA35373 |
| 2007-2013 | Chevrolet | Suburban 2500 | Chevrolet Suburban 2500 without Off Road Package Driver Side Fog Light TRQ LTA35373 |
| 2007-2014 | Chevrolet | Tahoe | Chevrolet Tahoe without Off Road Package Driver Side Fog Light TRQ LTA35373 |
| 2007-2014 | Chevrolet | Tahoe | Chevrolet Tahoe without Off Road Package Passenger Side Fog Light TRQ LTA35373 |
| 2008-2013 | Chevrolet | Tahoe | Chevrolet Tahoe Hybrid Passenger Side Fog Light TRQ LTA35373 |
| 2008-2013 | Chevrolet | Tahoe | Chevrolet Tahoe Hybrid Driver Side Fog Light TRQ LTA35373 |
| 2007-2012 | GMC | Acadia | GMC Acadia Passenger Side Fog Light TRQ LTA35373 |
| 2007-2012 | GMC | Acadia | GMC Acadia Driver Side Fog Light TRQ LTA35373 |
| 2015-2020 | GMC | Canyon | GMC Canyon Driver Side Fog Light TRQ LTA35373 |
| 2015-2020 | GMC | Canyon | GMC Canyon Passenger Side Fog Light TRQ LTA35373 |
| 2014-2015 | GMC | Sierra 1500 | GMC Sierra 1500 Driver Side Fog Light TRQ LTA35373 |
| 2014-2015 | GMC | Sierra 1500 | GMC Sierra 1500 Passenger Side Fog Light TRQ LTA35373 |
| 2015-2019 | GMC | Sierra 2500 HD | GMC Sierra 2500 HD Driver Side Fog Light TRQ LTA35373 |
| 2015-2019 | GMC | Sierra 2500 HD | GMC Sierra 2500 HD Passenger Side Fog Light TRQ LTA35373 |
| 2015-2019 | GMC | Sierra 3500 HD | GMC Sierra 3500 HD Passenger Side Fog Light TRQ LTA35373 |
| 2015-2019 | GMC | Sierra 3500 HD | GMC Sierra 3500 HD Driver Side Fog Light TRQ LTA35373 |
| 2007-2014 | GMC | Yukon | GMC Yukon Driver Side Fog Light TRQ LTA35373 |
| 2007-2014 | GMC | Yukon | GMC Yukon Passenger Side Fog Light TRQ LTA35373 |
| 2010 | Pontiac | G6 | Pontiac G6 Passenger Side Fog Light TRQ LTA35373 |
| 2010 | Pontiac | G6 | Pontiac G6 Driver Side Fog Light TRQ LTA35373 |
| 2008-2009 | Pontiac | G8 | Pontiac G8 Driver Side Fog Light TRQ LTA35373 |
| 2008-2009 | Pontiac | G8 | Pontiac G8 Passenger Side Fog Light TRQ LTA35373 |
| Brand Label | Part Number |
|---|---|
| GMC | 15839896 |
| Pontiac | 15839896 |
| Chevrolet | 15839896 |
| TYC | 19-5871-00 |
| Partslink Numbering System | GM2590104 |
| Hollander | 116-01186 |
This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Hi, I'm Mike from 1AAuto. We've been selling auto parts for over 30 years! We're dedicated to delivering quality auto parts, expert customer service, and fast and free shipping, all backed by our 100% satisfaction guarantee. We've created thousands of videos to help you install our parts with confidence. That saves you time and money, so visit us at 1AAuto.com, your trusted source for quality auto parts.
In this video we're going to be working with out 2012 GMC Acadia. We're going to show you how to remove and replace your fog light assembly in the bumper.
If you like this video, please click "subscribe." We have a ton more information on this vehicle as well as many other makes and models. If you want this part for your car, you can follow the link down in the description over to 1AAuto.com.
Here are the items you'll need for this repair: T20 Torx Driver, flat blade screwdriver, and side cutters.
This job can easily be done on the ground, but we're going to raise and support our vehicle to make it easier to film and show you what's going on. Turn your wheel in to whatever side you're working on. We're going to be working on the passenger side, so we'll cut our wheel all the way to the left.
If you're working on the driver side, you'll want to cut the wheel all the way to the right. Remove the seven T20 Torx screws. We have two on the bottom here and five running up along the backside of the bumper and the fender. Remove the eight plastic clips securing the inner fender well in. We have three in the top area here, one over at the front (in the middle), two down at the bottom, and these two at the back of the front portion of the liner at the bottom in the middle here.
There's a few different ways to remove these style clips. I like to try to take a small flat blade screwdriver and work up the center part of the clip just a little. Once you get it up some, if you have the room to get in there with a pair of side cutters, you can sneak them underneath and then pry up evenly from both sides. Once the center's out, you can pop the lower portion out the same way.
To remove the wheel liner, pull out on the bottom portion here and pull down and forward to release the front half of the wheel well from the rear and sneak it out of the bottom.
The six tabs that secure the fog light bezel are located around the edges here, with one larger alignment tab at the 9 o'clock position looking at it from the rear on the passenger's side. Remove the trim ring for the bezel for the fog light by pushing down on the plastic tabs on the outer ring here and pushing out. Have your hand ready on the other side in case it pops loose to make sure you don't drop it and cause it to get scratched or damaged.
Once the tabs are released, you can remove the chrome bezel from the bumper. Disconnect the electrical connector on the fog light, and then push down and release the three anchors here. You'll have to squeeze the tabs together and push them through to the front of the bumper. You may have to go around a few times to get them all to push out evenly. Once the tabs are released, you can remove the fog light from the bumper.
Line up your tabs and push the fog light assembly back into the bumper until it clicks. Reconnect the electrical connector to the back of the bulb. We have six evenly spaced tabs here and one alignment tab that sticks out farther in the center of the two here. You can see the corresponding hole in the bumper for that alignment tab, so we'll line that up and push the bezel back in until all the tabs snap back into place.
Reinstall your inner wheel well liner. You do this by pushing it up from the bottom and rotating it in over the tire. Be sure that the top slides into place behind the rear liner, as well as on the sides. Once you have some holes lined up, you can start installing your eight push pins. Set them up like this, install the bottom half, and then pop the tab into place. Reinstall your seven T20 Torx screws. We'll start them a couple of threads by hand before we install them with our socket and ratchet.
Thanks for tuning in. We hope this video helped you out. Next time you need parts for your car, please visit 1AAuto.com. Also check out our other helpful how-to and diagnosis videos.
Tools used
Hi, I'm Mike from 1A Auto. We've been selling auto parts for over 30 years. We're dedicated to delivering quality auto parts, expert customer service, fast and free shipping, all backed by our 100% satisfaction guarantee. Visit us at 1AAuto.com, your trusted source for quality auto parts.
So we're going to peel this splash shield back. It also will make it easier if you turn your wheel to the inside of whatever side you're working on so you can open this up. You can it’s in with some 7mm self-tapping screws and some push clips.
I'll start with the 7mm self-tapping screws. Using a flat-bladed screwdriver or trim clip tool, you're going to work these barbed clips out. Now we fold this up. Now you can peel you fender liner back and reach in and disconnect your fog lamp.
These three tabs or clips are tabbed on them on either side. You can squish them together with your fingers and push them out. Two top ones, now you reach out with your other hand to hold the fog light from the front. Squeeze the bottom one, sort of push them out, and then you're going to push from the middle to remove your fog light lens.
To install it, I'm going to leave these clips on here. Feed it in from the front, get it lined up with the holes, push it in, and that will click into place.
Reconnect the harness and your fog light lens is replaced. Pull that down. And then pull this down and push it back into place.
Replace the barbed clips if you took them out. Reinstall the 7mm self-tapping screws.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
Tools used
Hi, I'm Mike from 1AAuto. We've been selling auto parts for over 30 years! We're dedicated to delivering quality auto parts, expert customer service, and fast and free shipping, all backed by our 100% satisfaction guarantee. So visit us at 1AAuto.com, your trusted source for quality auto parts.
We took the wheel off to get a better camera angle, but you probably don't need to in your driveway. You just need to turn the wheel to the right so that you can access the three Torx bolts that are right on the inner fender liner. They're T20 bolts, and you'll want to remove those along with the two clips on the top of the fender liner so that you can push the liner out of the way.
With the trim tool that you can get from 1A Auto, you can pop it right in the clip and pull the clip right out of the fender liners. Once you have the centers out, the bottom half will come out very easily, just like that. There's one more clip right here on the back on the inner wheel well. You'll pop out the center and then the bottom half and the fender liner should be loose at that point.
The first step in replacing the fog light is removing the bezel that's on the outside of it. To do that you need to release the clips; there's five of them around the outside housing. You just basically take a small, flat tip screwdriver. You can pry in these little plastic tabs and pull them out. Then you can push down on the bezel and the bezel clips will pop right out. Once they're released you should be able to pull the bezel right out of the bumper.
The fog light itself is held in with these three push pins. Each ones has a couple of tabs on it that you need to compress. You can compress them with your fingers one at a time and pop them out of the housing or a 10 millimeter socket works pretty well. Just sliding it over there and releasing the clips and then going to the next one and release those clips. You'll want to pull the connector out like this in which case the fog light can pop right out. You can see the lenses look quite identical and the mounting on the back is the same as well. Same connector, same push pins, and it should snap right in and fit just like the original one does.
All right, you'll want the long one on the bottom, and you'll just slide it right in to the three holes that it snaps into. If you just push it right into place, the clips will lock in and the fog light will be mounted to the bumper. The bezel you're going to put the large side to the inside edge of the bumper, and it just pushes right into place. It has a couple of snaps, has five snaps around the outside edge that you'll want to double check that they click on in the backside of the bumper. As soon as they snap in, it's installed.
The last thing to hook up right here is the connector which again, it just pushes right into place. The long stud that's on the fog light actually has a Phillips head screw on the inside of it so all you do to adjust it is put a Phillips head screwdriver in it and turn it and it will adjust it on the bumper side.
The fender liner can now be put back into place. Tuck it behind the ABS sensor wire and then start putting your push pins right back into place. You'll want to reinstall your three T20 Torx screws next in the front of the fender liner.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
LTA35373
Works as intended. Fit perfect! Looks original.
