★★★★★
May 26, 2026
1999 GMC Jimmy
Perfect fit work great good price recommended
Replaces
About TRQ:
TRQ is a trusted brand dedicated to making every repair a success story by combining premium parts with easy installation. Each TRQ part is engineered by a team of automotive experts to meet or exceed OEM standards, delivering enhanced performance and maximum longevity. With rigorous in-house testing, the brand ensures superior fit and function across every product line. TRQ also provides customers with best-in-class, step-by-step installation videos—so you can complete repairs with confidence, whether you're a first-time DIYer or an industry professional.
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
This part fits 23 vehicles spanning 1997-2005.
| Year | Make | Model | Description |
|---|---|---|---|
| 1997 | Chevrolet | Blazer | Chevrolet Blazer 4 Wheel Drive without Tooth Style ABS Ring Front Driver & Passenger Side 2 Piece Wheel Bearing & Hub Assembly Set TRQ BHA50029 |
| 1997 | Chevrolet | Blazer | Chevrolet Blazer All Wheel Drive without Tooth Style ABS Ring Front Driver & Passenger Side 2 Piece Wheel Bearing & Hub Assembly Set TRQ BHA50029 |
| 1998-2005 | Chevrolet | Blazer | Chevrolet Blazer 4 Wheel Drive Front Driver & Passenger Side 2 Piece Wheel Bearing & Hub Assembly Set TRQ BHA50029 |
| 1999-2001 | Chevrolet | Blazer | Chevrolet Blazer All Wheel Drive Front Driver & Passenger Side 2 Piece Wheel Bearing & Hub Assembly Set TRQ BHA50029 |
| 1997 | Chevrolet | S10 Pickup | Chevrolet S10 Pickup 4 Wheel Drive without Tooth Style ABS Ring Front Driver & Passenger Side 2 Piece Wheel Bearing & Hub Assembly Set TRQ BHA50029 |
| 1998-2003 | Chevrolet | S10 Pickup | Chevrolet S10 Pickup 4 Wheel Drive Front Driver & Passenger Side 2 Piece Wheel Bearing & Hub Assembly Set TRQ BHA50029 |
| 2004 | Chevrolet | S10 Pickup | Chevrolet S10 Pickup Front Driver & Passenger Side 2 Piece Wheel Bearing & Hub Assembly Set TRQ BHA50029 |
| 1997 | GMC | Jimmy | GMC Jimmy 4 Wheel Drive without Tooth Style ABS Ring Front Driver & Passenger Side 2 Piece Wheel Bearing & Hub Assembly Set TRQ BHA50029 |
| 1998 | GMC | Jimmy | GMC Jimmy SL 4 Wheel Drive Front Driver & Passenger Side 2 Piece Wheel Bearing & Hub Assembly Set TRQ BHA50029 |
| 1998 | GMC | Jimmy | GMC Jimmy SLE 4 Wheel Drive Front Driver & Passenger Side 2 Piece Wheel Bearing & Hub Assembly Set TRQ BHA50029 |
| 1998 | GMC | Jimmy | GMC Jimmy SLS 4 Wheel Drive Front Driver & Passenger Side 2 Piece Wheel Bearing & Hub Assembly Set TRQ BHA50029 |
| 1998 | GMC | Jimmy | GMC Jimmy Envoy 4 Wheel Drive Front Driver & Passenger Side 2 Piece Wheel Bearing & Hub Assembly Set TRQ BHA50029 |
| 1999-2000 | GMC | Jimmy | GMC Jimmy 4 Wheel Drive Front Driver & Passenger Side 2 Piece Wheel Bearing & Hub Assembly Set TRQ BHA50029 |
| 2001 | GMC | Jimmy | GMC Jimmy SLS 4 Wheel Drive Front Driver & Passenger Side 2 Piece Wheel Bearing & Hub Assembly Set TRQ BHA50029 |
| 2001 | GMC | Jimmy | GMC Jimmy SLT 4 Wheel Drive Front Driver & Passenger Side 2 Piece Wheel Bearing & Hub Assembly Set TRQ BHA50029 |
| 2001 | GMC | Jimmy | GMC Jimmy SLE 4 Wheel Drive Front Driver & Passenger Side 2 Piece Wheel Bearing & Hub Assembly Set TRQ BHA50029 |
| 2001 | GMC | Jimmy | GMC Jimmy Diamond Edition 4 Wheel Drive Front Driver & Passenger Side 2 Piece Wheel Bearing & Hub Assembly Set TRQ BHA50029 |
| 1997 | GMC | S-15 Sonoma | GMC S-15 Sonoma 4 Wheel Drive without Tooth Style ABS Ring Front Driver & Passenger Side 2 Piece Wheel Bearing & Hub Assembly Set TRQ BHA50029 |
| 1998-2003 | GMC | S-15 Sonoma | GMC S-15 Sonoma 4 Wheel Drive Front Driver & Passenger Side 2 Piece Wheel Bearing & Hub Assembly Set TRQ BHA50029 |
| 2004 | GMC | S-15 Sonoma | GMC S-15 Sonoma Front Driver & Passenger Side 2 Piece Wheel Bearing & Hub Assembly Set TRQ BHA50029 |
| 1998-2000 | Isuzu | Hombre | Isuzu Hombre 4 Wheel Drive Front Driver & Passenger Side 2 Piece Wheel Bearing & Hub Assembly Set TRQ BHA50029 |
| 1997 | Oldsmobile | Bravada | Olds Bravada without Tooth Style ABS Ring Front Driver & Passenger Side 2 Piece Wheel Bearing & Hub Assembly Set TRQ BHA50029 |
| 1998-2001 | Oldsmobile | Bravada | Olds Bravada Front Driver & Passenger Side 2 Piece Wheel Bearing & Hub Assembly Set TRQ BHA50029 |
| Brand Label | Part Number |
|---|---|
| Timken | 513124 |
| MOOG Hub Assemblies | 513124 |
| ACDelco | FW317 |
| ACDelco | FW127 |
| Raybestos Brakes | 713124 |
| SKF | BAR-5130-A |
| Mevotech | H513124 |
| General Motors | 7467139 |
| General Motors | 7470608 |
| GMB | 730-0001 |
| Isuzu | 8-12413-045-0 |
| General Motors | 7470607 |
| SKF | BR930097 |
| Beck/Arnley | 051-6170 |
| General Motors | 12413046 |
| General Motors | 7470537 |
| Drive Tech America | NT513124 |
| General Motors | 12413045 |
| Chicago Rawhide | BR930097 |
| Centric Parts | 402.66006 |
| Centric Parts | 402.66006E |
| ACDelco | 513124 |
| Duralast | DL513124HD |
| Beck/Arnley | 516170 |
| Dorman | 951011 |
| Isuzu | 8124130450 |
| NAPA | BRG BR930097 |
| Hollander | 538-01459 |
| Mevotech Supreme | H513124 |
This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com-- your source for quality replacement parts and the best service on the internet.
Hi, I'm Mike Green. I'm one of the owners of 1AAuto. I want to help you save time and money repairing and maintaining your vehicle. I'm going to use my 20+ years experience restoring and repairing cars and trucks like this to show you the correct way to consult parts from 1AAuto.com. The right parts installed correctly, that's going to save you time and money. Thank you and enjoy the video.
In this video we'll be showing you how to replace a front hub on this four wheel S10 Truck, same as any 97 to present S10 or Blazer. Tools you'll need are metric sockets, 10mm-19mm, 18mm and 13mm wrenches, Jack and Jack Stands, 35mm Socket for the Hub Nut, Large Screwdriver or a Pry bar, some Penetrating Oil and a Torque wrench to put it back together.
Okay so first, if you're using hand tools, you're going to want to loosen your Log Nuts up and that's going to do with a 19mm wrench and you want to do this on the ground obviously because that way the wheels won't be moving. Then the other thing you're going to want to do is you're going to want to use your 34mm socket, 35mm actually. Now I'm going to raise the car up and secure it. Okay, so I've raised the wheel. I'm working on up off the ground. By putting the jack under there and then actually I have jack stand under the frame here and that's what's really going to hold the weight. Now I'm going to remove the tire. Now I could remove the center hub nut and the washer. Okay, now I'm going to remove my brake caliper by removing this bolt here and then down on the backside, this bolt here. Okay, they're 18mm bolts.
Okay now I'm going to use my wrench just pry the caliper right off then rest it right up here. Take the disc off. Now I'm going to remove the clips for the hub harness here and here. Okay and then the harness goes right up in here. Okay, and I just disconnected it. Then you can just use a screwdriver. I can't really. That's why you need a screwdriver to pry it up out of the frame there. Okay. Here's how I'm just coating those two little nuts with penetrating oil and then I'm going to take the small one off. Actually, I'm going to finish prying that clip up and out and now I'm going to take the small one off with a 10mm wrench. Okay and here this next shot, I'm actually showing you how to get the wrench up in behind there to hold that bolt. That's where you want to place the wrench in order to hold the bolt on the other side and not here. I'm just removing that clip bolt.
Okay and here I'm just finishing up taking out that bolt. Actually like to cut up the bolt and the nut back into the control arm just for safe keeping so that I know where they are. Here is the last clip that's on the frame. This is a 13mm bolt and so I'm unbolting from the frame here. Now I just pull in harness out and free and I'm going to pull the clips off the harness so I can put them on to the new hub harness when I'm ready to install it. Now you want to remove your hub just three bolts, one in the back, one in the middle and the top and then one over here in the front.
These are 18mm bolts. Okay so front and rear ones you can get to with an impact wrench or a regular wrench. The top one is a little more difficult. You have to use a hand wrench and it helps if you swivel the steering that helps you get to the bolts that much easier. Then as you can see as I'm taking them out, you can pry with a pry bar or a large screwdriver. Replaces one right back here. There's a little place that in the flange that you can get a screwdriver into and pry against the steering knuckle and then also in behind right where the steering knuckle is here on in the front and you can see me get it apart now. I'm just shaking it. You want to be careful not to bend that backend plate too much. Basically I lead that top bolt in. It's very loose but it's still in there. Now you can see the hub comes right out and hold the harness out and away from the backend plate and your hub is out.
There's this little rubber o-ring that you want to make sure it goes back on correctly. Okay so here's the new one with the hubs off versus the old one. See the leads are all the same, has the same bracket, same end. It's going to mount the same. Everything's going to be all the same. Okay so ends the removing of the hub. Reinstalling is pretty easy. It's a reverse of procedure and obviously you need to use a torque wrench, torque the small bolts to 65 foot-pounds and the hub nut to 95 foot-pounds as well as your lug nuts, it's 75 foot-pounds. We do have this detailed in another video. That is a reply to this video. Also, you can just search for S10 hub and find the installation video.
We hope this helps you out. Brought to you by www.1AAuto.com-- your source for quality replacement parts and the best service on the internet. Please feel free to call us toll free 888-844-3393. We're the company that's here for you on the internet and in person.
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet. Hi, I'm Mike Green. I'm one of the owners of 1A Auto. I want to help you save time and money repairing and maintaining your vehicle. I'm going to use my 20-plus years experience restoring and repairing cars and trucks like this to show you the correct way to install parts from 1AAuto.com. The right parts, installed correctly--that's going to save you time and money. Thank you and enjoy the video.
This is part two. We're going to install the front hub on this 4-wheel drive S10. Same as Blazer, Jimmy, and Sonoma. Tools you're going to need are metric sockets, 10-19mm, plus some metric wrenches, jack and jack stands, a 35-mm socket for the hub nut, large screwdriver or pry bar, penetrating oil, a torque wrench and you might want to throw in a hammer and a rubber mallet, too. Here's the new 1A Auto hub versus the old one. See, leads all the same, has the same bracket, same end. Now it's going to mount the same. Everything's going to be all the same. Next step, take our old ring and put it onto the new hub. Now is as good a time as any to grease the lower ball joint, the tie rod end, and the upper ball joint. Technically it goes on here like that. Feed the harness through. The connector is going to be where that big gap is. We'll get this up in here, get everything somewhat lined up. Grab one of our bolts, make it one of the easy ones down here, put it through, work it in, get it going a little bit.
Now I'm going to speed it up. Now I'm going to work the other two bolts in. Then I'm going to use a ratchet and socket and tighten them up. Shifting the steering a little bit to get to them. You do want to try to tighten them up evenly. You don't want to just tighten one all the way up because you want to pull the hub into the steering knuckle pretty much evenly. So I'm just rotating around and tightening. After this, I'll set my torque wrench to 65 foot-pounds and torque them up. Now you tighten these up to about 65 foot-pounds. Now we're going to put the harness back in. Remember here, you've got a little 10-mm bolt there on that first clip and you got a 13-mm bolt and nut on that second clip and you have to clip it in together with the brake line. The hub harness goes in behind the brake line, so the bolt goes to the hub harness first then the brake line harness. Then it's opposite on the frame connector. The brake line goes onto the frame and then the hub harness goes on top of it. So tighten up that bolt, tighten up the frame and then... Tighten the frame, and then you can take the clip, put it onto the frame, connect them together. Once they're connected, pull your flap back down and you're all set.
Here I'm putting the rotor back on. I apologize for the poor camera work here, I didn't realize I wasn't shooting it very well. I'm putting the lug nut, just one on. Just to keep the rotor in place. Makes it easier to get the caliper on. I'm grabbing the caliper. I'm also not touching the disk or the brake pad surface. You want to try to keep them clean, keeps your brakes working better. If you do hit them, just use a little linseed oil or brake parts cleaner. Then I use the rubber mallet to persuade the caliper on there. Put the bolts in for the caliper. They should be torqued to 50 to 60 foot-pounds. The top, I didn't get a torque wrench on, so I used my well-calibrated arm and hand, as you'll see. After that, torque up the bottom one correctly. I'm going to tighten the hub nut up with an impact wrench. I'm going to watch in back here, as you can see, there's a little gap right here. This shiny ring. That will close up as I tighten and I'll just stop before that closes all the way because I want to tighten that with a torque wrench when the car is on the ground. I replaced my hub and those three bolts have been torqued. I put my brake back on, those bolts have been torqued. I reinstalled my line here. That's all tight. Now I need to put my wheel back on. I'm going to torque the lug nut to 90 foot-pounds. Now I'm going to torque the wheel lug nuts to 75 foot-pounds. Put my cap back on. Lug nut covers.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Perfect fit work great good price recommended
Fixed the problem quickly. Husband said the parts were of great quality and easy to install. Product arrived quickly
Good afternoon, good product great price. My vehicle is quiet what more could I ask for?
Easy to work with and working great
The part was perfect. I watched the 1A video which made the repair smooth.
They were a perfect match perfect fit installed very easily thank you.
Just purchased 2 front wheel bearings in April and tonight the front passenger side wheel bearing went out leaving my car disabled on the side of the road. Now the cost I concur from having to get it towed to my house, and replacing the bad bearing, I'm at a loss. Certainly should have lasted longer than 7 months. Hopefully the company will help resolve this issue
My trq wheel bearings were good priced and good quality and their shipping was prompt ,the wheel bearings looked and fit like original parts... No problems here.......
I have purchased these and replaced the set once and now they are going bad again. I am very disappointed. I need to replace them again and need to pay for shipping. If I would have paid for GM OEM I would have been further ahead with my cost and the return shipping!
They shipped fast and with the video it was easy to install but I had one little bolt on the upper control arm that someone had put a standard nut on a metric screw that took a little longer to get off but it fixed my ABS light. Thank you guy again.
BHA50029
This kit will only be able to work for vehicles that have four wheel drive. Please let us know if you have any questions!
This kit will only be able to work for vehicles that have four wheel drive.
This part will not fit your vehicle. We may have a part that is listed to fit. Please enter your vehicle's year make and model in the search bar at the top of the page and search for hubs that are listed for 2 wheel drive models. This will display parts guaranteed to fit your vehicle.
This part will not fit your vehicle. We may have a part that is listed to fit. Please enter your vehicle's year make and model in the search bar at the top of the page. This will display parts guaranteed to fit your vehicle.
These will fit any trim package 2003 Chevy Blazer S10 with 4WD.
