Returns: Parts with electrical components cannot be returned once installed.
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
How to Replace Power Window Door Lock Switch 2001-04 GMC Sonoma
Created on:
Tools used
Flat Blade Screwdriver
1. Removing the Switch Panel
Pry up the switch panel by hand
Disconnect the wiring harnesses
2. Removing the Switch
Pry out the switch with a flat blade screwdriver
Pull the switch up by hand
3. Installing the Switch
Push in the new switch until it clips
4. Reinstalling the Switch Panel
Connect the wiring harnesses
Push the switch panel into the door
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we'll show you how to replace the drivers, or the master power window switch on this 2003 GMC Sonoma. It's the same as pretty much any of the four-door Sonomas from this era. The only tools you'll need are a couple of flat blade screwdrivers.
Start by grabbing the front of your switch plate. Push back and pull up. It should come out. You want to use a screwdriver. On this one there's a tab right here you push, this gray one. Put your screwdriver right down in here and pry out. Here there's a tab, then here there's a tab. For this one here, it's not unheard of to have to use two screwdrivers. Put this one down in so that the tab that locks it is interfered with by the screwdriver. I use another one to pry up. Get the connector moving.
The switch is pretty easy to get out. You want to go down between the gray and the black plastic and pry out while you're pulling on the switch. Same thing back here, between the switch and the gray plastic bezel. Get your screwdriver in and it comes right out.
New switch from 1A Auto. Exactly the same, so they go in there and it clips right in. Just going to have to put it in, push forward a little bit, then get the back down in. Now I can plug everything back in.
Again, the back kind of locks in first. Then the front goes down in.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
SWA41528
In Stock
Product Reviews
Loading reviews
Customer Q&A
No questions have been asked about this item.
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
GMC is a registered trademark of General Motors Company. 1A Auto is not affiliated with or sponsored by GMC or General Motors Company.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.