Replaces
Part Details
Specifications
About TRQ:
TRQ is a trusted brand dedicated to making every repair a success story by combining premium parts with easy installation. Each TRQ part is engineered by a team of automotive experts to meet or exceed OEM standards, delivering enhanced performance and maximum longevity. With rigorous in-house testing, the brand ensures superior fit and function across every product line. TRQ also provides customers with best-in-class, step-by-step installation videos—so you can complete repairs with confidence, whether you're a first-time DIYer or an industry professional.
Product Features
TRQ suspension kits are manufactured using premium raw materials and coatings for extended service life. Each TRQ suspension component is designed to be a direct, maintenance-free replacement to the stock unit. To extend the life of your steering and suspension components, TRQ recommends replacing components in pairs, sets, or kits. All products are fit and road-tested in our Massachusetts R&D facility to ensure we deliver on our promise of Trusted Reliable Quality.
Install Tip: When replacing steering components, have a professional alignment performed afterwards. This ensures proper tracking and even tire wear.
Our steering and suspension components are pre-greased and sealed for long life and do not require the extra maintenance typically required by greaseable versions.
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
This part fits 22 vehicles spanning 2001-2010.
| Year | Make | Model | Description |
|---|---|---|---|
| 2002-2006 | Chevrolet | Avalanche 2500 | Chevrolet Avalanche 2500 with 3 Groove Pitman Arm Front 12 Piece Steering & Suspension Kit TRQ PSA58673 |
| 2001-2003 | Chevrolet | Silverado 1500 HD | Chevrolet Silverado 1500 HD with 3 Groove Pitman Arm Front 12 Piece Steering & Suspension Kit TRQ PSA58673 |
| 2005-2006 | Chevrolet | Silverado 1500 HD | Chevrolet Silverado 1500 HD with 3 Groove Pitman Arm Front 12 Piece Steering & Suspension Kit TRQ PSA58673 |
| 2007 | Chevrolet | Silverado 1500 HD Classic | Chevrolet Silverado 1500 HD Classic with 3 Groove Pitman Arm Front 12 Piece Steering & Suspension Kit TRQ PSA58673 |
| 2001-2004 | Chevrolet | Silverado 2500 | Chevrolet Silverado 2500 with 3 Groove Pitman Arm Front 12 Piece Steering & Suspension Kit TRQ PSA58673 |
| 2001-2010 | Chevrolet | Silverado 2500 HD | Chevrolet Silverado 2500 HD with 3 Groove Pitman Arm Front 12 Piece Steering & Suspension Kit TRQ PSA58673 |
| 2007 | Chevrolet | Silverado 2500 HD Classic | Chevrolet Silverado 2500 HD Classic with 3 Groove Pitman Arm Front 12 Piece Steering & Suspension Kit TRQ PSA58673 |
| 2001-2006 | Chevrolet | Silverado 3500 | Chevrolet Silverado 3500 with 3 Groove Pitman Arm Front 12 Piece Steering & Suspension Kit TRQ PSA58673 |
| 2007 | Chevrolet | Silverado 3500 Classic | Chevrolet Silverado 3500 Classic with 3 Groove Pitman Arm Front 12 Piece Steering & Suspension Kit TRQ PSA58673 |
| 2007-2010 | Chevrolet | Silverado 3500 HD | Chevrolet Silverado 3500 HD with 3 Groove Pitman Arm Front 12 Piece Steering & Suspension Kit TRQ PSA58673 |
| 2001-2010 | Chevrolet | Suburban 2500 | Chevrolet Suburban 2500 with 3 Groove Pitman Arm Front 12 Piece Steering & Suspension Kit TRQ PSA58673 |
| 2001-2003 | GMC | Sierra 1500 HD | GMC Sierra 1500 HD with 3 Groove Pitman Arm Front 12 Piece Steering & Suspension Kit TRQ PSA58673 |
| 2005-2006 | GMC | Sierra 1500 HD | GMC Sierra 1500 HD with 3 Groove Pitman Arm Front 12 Piece Steering & Suspension Kit TRQ PSA58673 |
| 2007 | GMC | Sierra 1500 HD Classic | GMC Sierra 1500 HD Classic with 3 Groove Pitman Arm Front 12 Piece Steering & Suspension Kit TRQ PSA58673 |
| 2001-2004 | GMC | Sierra 2500 | GMC Sierra 2500 with 3 Groove Pitman Arm Front 12 Piece Steering & Suspension Kit TRQ PSA58673 |
| 2001-2010 | GMC | Sierra 2500 HD | GMC Sierra 2500 HD with 3 Groove Pitman Arm Front 12 Piece Steering & Suspension Kit TRQ PSA58673 |
| 2007 | GMC | Sierra 2500 HD Classic | GMC Sierra 2500 HD Classic with 3 Groove Pitman Arm Front 12 Piece Steering & Suspension Kit TRQ PSA58673 |
| 2001-2006 | GMC | Sierra 3500 | GMC Sierra 3500 with 3 Groove Pitman Arm Front 12 Piece Steering & Suspension Kit TRQ PSA58673 |
| 2007 | GMC | Sierra 3500 Classic | GMC Sierra 3500 Classic with 3 Groove Pitman Arm Front 12 Piece Steering & Suspension Kit TRQ PSA58673 |
| 2007-2010 | GMC | Sierra 3500 HD | GMC Sierra 3500 HD with 3 Groove Pitman Arm Front 12 Piece Steering & Suspension Kit TRQ PSA58673 |
| 2001-2010 | GMC | Yukon XL 2500 | GMC Yukon XL 2500 with 3 Groove Pitman Arm Front 12 Piece Steering & Suspension Kit TRQ PSA58673 |
| 2003-2007 | Hummer | H2 | Hummer H2 with 3 Groove Pitman Arm Front 12 Piece Steering & Suspension Kit TRQ PSA58673 |
| Brand Label | Part Number |
|---|---|
| MOOG Chassis Products | ES3488 |
| MOOG Chassis Products | K80631 |
| MOOG Chassis Products | ES3609 |
| MOOG Chassis Products | K6696 |
| MOOG Chassis Products | K6535 |
| MOOG Chassis Products | K6654 |
| MOOG Chassis Products | K6693 |
| DIY Solutions | SUS00164 |
| DIY Solutions | SUS06880 |
| DIY Solutions | SUS07362 |
| DIY Solutions | SUS07379 |
| DIY Solutions | SUS00163 |
| DIY Solutions | SUS06359 |
| DIY Solutions | SUS05325 |
| General Motors | 15835052 |
| General Motors | 12546193 |
| General Motors | 15891516 |
| General Motors | 12479051 |
| General Motors | 10385580 |
| General Motors | 15070821 |
| General Motors | 15295861 |
| General Motors | 15167767 |
| General Motors | 15891515 |
| General Motors | 26059210 |
| General Motors | 25905442 |
| General Motors | 12542993 |
| General Motors | 15840266 |
| MOOG Chassis Products | K6694 |
| DIY Solutions | SUS00285 |
| General Motors | 15049879 |
| MOOG Chassis Products | K700539 |
| MOOG Chassis Products | K80631, K6428 |
| Mevotech | MK80631 |
| Mevotech | MES3609 |
| Mevotech | MK6535 |
| Mevotech | MK6654 |
| Mevotech | MES3488 |
| Mevotech | MK6693 |
| Mevotech | MK6694 |
| Mevotech | MK6696 |
| MOOG Chassis Products | K6535P |
| QuickSteer | K80631 |
| QuickSteer | K6694 |
| Dorman - OE Solutions | 541-396 |
| Delphi | TA2409 |
| Mevotech Supreme | MK6535 |
| Mevotech Supreme | MK6654 |
| Mevotech Supreme | MES3488 |
| Mevotech Supreme | MK6694 |
| Mevotech Supreme | MK80631 |
| Mevotech Supreme | MK6696 |
| Mevotech Supreme | MES3609 |
| Mevotech Supreme | MK6693 |
| Dorman - OE Solutions | 533-199 |
| Suspensia | X07BJ0194 |
This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace an outer tie rod on this 2005 GMC Savana 2500. It's the same process on the Savanas from 2001 to 2006, as well as a large variety of GM trucks and vans. The tools you'll need are an adjustable wrench, a piece of pipe for leverage, a 7 millimeter and 21 millimeter socket and ratchet, a pair of pliers, jack and jack stands, a hammer, and a torque wrench.
Start by removing the wheel cover or whatever wheel trim you might have. This one has a chrome one. Pull that off, and then, just use your socket and pull or loosen the lug nut covers. Pull the center cap off. If you don't have the benefit of air tools, you'll want to loosen the lug nuts with the vehicle on the ground. Then, jack up and secure the vehicle and remove the lug nuts, wheel, and tire.
Now, what you want to do is angle the wheel so you can get back to the outer tie rod. Now, using an adjustable wrench and a piece of pipe, you want to loosen the tie rod. Using a 21 millimeter socket, you want to remove that castle nut at the top of the ball joint. This one didn't have a pin through it to secure it, but typically, they do. All you want to do is straighten out the pin and pry it out. Now, using a hammer, you just want to hit the knuckle. Just repeatedly hit it until that bolt loosens up and pull the tie rod free. Before you remove the tie rod, make sure you know what the length of it is. Just measure this distance. Now, you can spin the outer tie rod off.
The old one is on the right, with the new outer tie rod on the left from 1A Auto. You can see it's an exact match. It comes with everything you need for installation. Now, using a 7 millimeter socket and ratchet, you just want to make sure you tighten this up. Then, twist the outer tie rod back onto the inner tie rod. Now, you want to re-measure it and make sure it's the right distance. Then, you want to line up the knuckle with the bolt on the ball joint. Push it up through and replace your castle nut. Push the pin through the bolt and the castle nut. You just want to use pliers to pry the ends of the pin. Now using your adjustable wrench, just tighten that back up.
We'll just fast forward as he puts the wheel back on. You want to replace the lug nuts while it's up in the air. Tighten them. Lower the vehicle. Tighten them the rest of the way and then torque them to 100 foot-pounds. Then, you want to put back on your hubcap. Tighten the lug nut caps and replace your wheel cover.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Tools used
Brought to you by 1AAuto.com your source for quality replacement parts and the best service on the internet.
Hi, I'm Mike Green. I'm one of the owners of 1A Auto. I want to help you save time and money repairing or maintaining your vehicle. I'm going to use my 20-plus years experience restoring and repairing cars and trucks like this to show you the correct way to install parts from 1AAuto.com. The right parts, installed correctly that's going to save you time and money. Thank you and enjoy the video.
In this video, we're going to replace the sway bar links in this 2002 GMC 2500HD, basically the same as most '88 to '06 GM pickups, SUVs, vans; also the same as a couple of Ford applications. Tools you'll need are a jack and jack stands for some vehicles, 14 mm socket and ratchet or whatever is correct for your link, they could be different depending on application, an adjustable wrench, and some penetrating oil.
Your stabilizer link is right up underneath. This big bar here is your stabilizer bar, and then here is your control arm. It's connected by this, which is the stabilizer link right here. This can break. Also, these bushings, these rubber bushings can wear out, which will cause a rattling sometimes when you go over bumps. You have a good idea if it's the stabilizer link if, when you go around a turn, the rattling stops. I'm going to show you how to replace that.
On top, you're going to want to spray some penetrating fluid. This is a 14 mm bolt down here at the bottom. What you're going to want to do is put an adjustable wrench onto this side. This is an original link here, so the thing on top is kind of bolt-shaped. I've got that on there to hold it. Now I'm going to attempt to slowly unscrew it.
The bolt comes down, and that can come out. Then you can see, even though there's nothing too terribly wrong, you can see that this one is worn, right in here, so we'll replace it. On the original you can see this top nut has edges to it so you can get that wrench on there to hold it in place. We've gotten it out of there, but we still have this in place. Just pull that right out, like that. I'm going to take my new link and I'm going to put it up through. This bushing has the ridge up into the control arm. Then I'm going to take a bushing down and then a washer on top of that, then my spacer. Then I'm going to take a bushing and a washer, and now the step goes up into the sway bar. Then just push that.
In order to get this in, what I've done is this is a little jack. If you're doing this just on the ground, you can do the same thing. Put the jack in underneath the stabilizer bar here, lift it up, and create plenty of room to push that up through. Then you want to make sure these bushings all go right into the holes in the stabilizer bar, right there, and the control arm. This last bushing goes with the ridge down, then the washer on top. I'm going to put the jack right in underneath here, push this up in to get the nut on.
I've got this together and I've got the nut started on there. I'm going to replace the other side first before I tighten it up. I wouldn't take apart the other side here you can see, this is the one from the driver's side and this is the one from this side, so you can see this whole part was rough and it broke off. It's possible this link wasn't really doing anything anyways. This here that broke off of this one is stuck inside there. What I'm going to have to do is I'm going to have to actually cut this link with my Sawzall. I'm going to do that very carefully, because I don't want to contact the boot or anything else. I don't want to contact the CVs. I just want to cut through the link itself.
Now with the car on the ground, you want to tighten up the links. I'm just using an air ratchet. You can hand tools, obviously. Tighten up both sides and you're done.
We hope this helps you out. Brought to you by www.1AAuto.com- your source for quality replacement parts and the best service on the internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the internet and in person.
PSA58673
tie rod might have had 5k miles on it and it almost bent in half when i backed my truck up in 4x4. duramax is bone stock and is on 265 tires. get what you pay for cheap built parts
My mechanic noted needed greased and these were not - was able to use a couple of items but parts were sent quickly which is perfect but should have asked mechanic before purchased - my bad
All is good just what I needed thanks
Awesome full package took the shimmy out my front end. Has ro buy a couple tools and so some solid labor but saved myself 100's on DIY
Perfect fit on my Chevy and fast delivery
Fantastic delivery time and an easy ordering process. Thank you so much for everything!
Everything is as it should be. Working great. I would highly recommend this product
Great prices, in stock parts, & super fast shipping to my doorstep. Half the price as the local auto parts store.
Well made parts of good quality. Shipped fast an no hassle. Definitely will be ordering more.
I ordered these parts expecting them to be delivered a week later, and ended up receiving them 3 days earlier. Parts were everything they were supposed to be and packing was perfect. I will absolutely be ordering from here again.
YES
Yes, I did this to my truck about two years ago and from what I can remember the only part that does not have a fitting for the grease zerks were the lower ball joints. All other parts came with a separate zerk you have to attach yourself.
Thanks for your question! This will only fit the vehicles they are listed for. Thank you!
On the inside of the circle part of the pitman arm is 3 or 4 (depending) flat grooves. Between the teeth. Hope that helps, just replaced mine two days ago!
Lucius Red
after installation you need to grease them with a quality high pressure grease
We have a few different aftermarket companies build these parts specifically for us, as our 1A Auto house brand. They are manufactured to the same OEM specifications as the original part that came with your vehicle and are covered by a lifetime warranty. If you have any further questions, please don't hesitate to ask.
