Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
How to Replace Tail Light 2000-03 GMC Yukon
Created on:
Tools used
Phillips Head Screwdriver
1. Removing the Taillight Assembly
Remove the two Phillips screws.
Pull the taillight assembly out.
Twist out the sockets.
To change a bulb pull it straight out and push a new one in.
2. Replacing the Taillight Assembly
Twist the sockets into the assembly.
Line up the taillight and push it into place.
Replace the two Phillips screws.
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the internet.
Hi, I'm Mike Green. I'm one of the owners of 1A Auto. I want to help you save time and money repairing and maintaining your vehicle. I'm going to use my 20-plus years experience restoring and repairing cars and trucks like this to show you the correct way to install parts from 1AAuto.com, the right parts installed correctly. That's going to save you time and money. Thank you and enjoy the video.
In this video, we'll be showing you taillight replacement on this 2003 Yukon, same as any 2000 to 2006 Yukon, Tahoe, Suburban or Yukon XL. All you'll need is a Phillips screw driver.
To replace the taillight bulb or taillight on one of these GM SUVs, Yukon, Tahoe or Suburban. This is a 2003 that I'm working on. Two Phillips screws. Okay. The taillight comes out, and the replacement bulb, you just twist and pull, and the bulbs then pull out of the socket. Okay, and obviously, you pull them all out. At 1A Auto, we sell the complete taillight assembly in case you had a little run-in with the parking garage or something like that. Back in, there's two pins here that go in the two holes here. Make sure those go in the right place. Push it in. Put your screws in, and tighten them up.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the internet. Please feel free to call us toll free, 888-844-3393. We're the company that's here for you on the internet and in person.
Product Reviews
Loading reviews
There are no reviews for this item.
Customer Q&A
No questions have been asked about this item.
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
GMC is a registered trademark of General Motors Company. 1A Auto is not affiliated with or sponsored by GMC or General Motors Company.See all trademarks.
Enter Vehicle Year Make Model
Specify your vehicle's year, make and model to guarantee fit.
Year
Make
Model
Options
Drivetrain
This part doesn’t fit a . Select from parts that fit.