Replaces
Part Details
Product Features
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the internet.
Hi, I'm Mike Green. I'm one of the owners of 1A Auto. I want to help you save time and money repairing and maintaining your vehicle. I'm going to use my 20-plus years experience restoring and repairing cars and trucks like this to show you the correct way to install parts from 1AAuto.com, the right parts installed correctly. That's going to save you time and money. Thank you and enjoy the video.
In this video, we'll be showing you taillight replacement on this 2003 Yukon, same as any 2000 to 2006 Yukon, Tahoe, Suburban or Yukon XL. All you'll need is a Phillips screw driver.
To replace the taillight bulb or taillight on one of these GM SUVs, Yukon, Tahoe or Suburban. This is a 2003 that I'm working on. Two Phillips screws. Okay. The taillight comes out, and the replacement bulb, you just twist and pull, and the bulbs then pull out of the socket. Okay, and obviously, you pull them all out. At 1A Auto, we sell the complete taillight assembly in case you had a little run-in with the parking garage or something like that. Back in, there's two pins here that go in the two holes here. Make sure those go in the right place. Push it in. Put your screws in, and tighten them up.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the internet. Please feel free to call us toll free, 888-844-3393. We're the company that's here for you on the internet and in person.
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and the next time you need a part for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to service the bulbs as well as replace the entire tail light assembly on this 2002 Chevy Suburban. It's the same part and similar process on these Suburbans from 2000 to 2003. We show you on the passenger side, but the driver side is the same procedure. The items you will need for this include new tail lights from 1AAuto.com and a Phillips screwdriver.
Your taillights are held in right here with two Phillips screws. We'll just fast-forward as Don removes both of those. Now the tail light will just pull out.
To service the bulbs, you just push the tab toward the socket counterclockwise. The bulb pulls out. Push the new one in and twist the socket back in clock wise. The other two bulbs are the same procedure.
If you're replacing the assembly, push out all your sockets. On the left in the old taillight assembly and the right is the new one from 1A Auto. You can see they're identical, and they're going to fit exactly the same.
Twist your sockets into your new taillight assembly. Then just push the assembly back into place. Replace those two Phillips screws and tighten them up. Once you've done that, you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
