Replaces
Replaces Chevrolet GMC Cadillac Front & Rear 5 Piece Suspension Kit TRQ PSA52596
$1,069.95
Replaces Chevrolet GMC Cadillac Front & Rear 4 Piece Magnetic Ride Control Complete Shock Assembly & Shock Absorber Kit TRQ SKA39928
$1,023.95
Replaces Chevrolet GMC Cadillac Front & Rear 8 Piece Magnetic Ride Control Suspension Kit TRQ PSA39444
$1,010.95
Replaces Chevrolet GMC Cadillac Front & Rear 4 Piece Magnetic Ride Control Shock & Strut Kit TRQ SKA42931
$896.95
Replaces Chevrolet GMC Cadillac Front & Rear 8 Piece Suspension Kit TRQ PSA52595
$884.95
Item Condition:
New
1 Year Warranty
This item is backed by our 1-year warranty. In the event this item should fail during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Hi, I'm Mike from 1A Auto. We've been selling auto parts for over 30 years. We're dedicated to delivering quality auto parts, expert customer service, fast and free shipping, all backed by our 100% satisfaction guarantee. Visit us at 1AAuto.com, your trusted source for quality auto parts.
Pull up your trim panel. Use a plastic trim tool, available on 1AAuto.com. Put it in the back, pull up and then work it in at the front as well. You can see that there's two clips at the front and rear. If you don't have a trim tool, but you have strong fingernails, you can get it out. Then just pull straight up on the front as well. Then, there's four harnesses to disconnect, and you might have more if you have more options. Just press the tabs and pull out. Three T15 Torx screws hold it in place. We'll remove those. Once you remove the last one, pull it right out.
The replacement switch from 1A Auto goes right in, and put your T15 screws back in and tighten them up. When you tighten them, you want to get them firm, but don't over tighten. If you over tighten, you risk breaking the bezel that the switch screws into. Switch panel, these all only go in one way. This one won't plug into there, it won't plug into there. It'll only plug into there. This one only plugs into there.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
