Replaces
Frequently bought together
Part Details
Specifications
Our control arms are designed to be direct replacements for the original factory parts. They are 100% brand new and require no modifications for installation. No special tools are required because all of the bushings come pre-installed.
Our steering and suspension components are pre-greased and sealed for long life and do not require the extra maintenance typically required by greaseable versions.
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
PSA62436
These will be sealed units.
Yes, the bushings will come preinstalled on the arms.
Looks like there was grease inside before I installed the grease zerk. I ended up pumping grease in when j was done to be sure though.
No, this will be meant for 4 wheel drive models. Please view our other listings for the appropriate parts.
New hardware is not included with this item. You may be able to reuse your original hardware if it is in good condition.
Thank you for your inquiry. These parts will come pre-greased and sealed from the manufacturing facility, and will not include grease fittings. Please let us know if you have any further questions.
Currently, we do not carry this part for your vehicle. We're always updating our inventory so please check back soon! If you have any other questions, let us know.
Thank you for the inquiry. We would no be able to guarantee fitment on a vehicle that has a lift on it. While this may not seem like alot, the stress will be placed on parts of the arms that are not intended on receiving said stress and will wear much faster.
According to our specifications this is listed to fit the following vehicle:
1996-2000 Chevy Tahoe 4 Wheel Drive Front Upper Control Arm with Ball Joint V8 5.7L Pair
We do not have one on our site but your local dealership may be able to further assist you.
