★★★★★
April 25, 2025
Good products
Parts went on easy. Just as described. Brakes are quiet and smooth when slowing down.
Replaces
About TRQ:
TRQ is a trusted brand dedicated to making every repair a success story by combining premium parts with easy installation. Each TRQ part is engineered by a team of automotive experts to meet or exceed OEM standards, delivering enhanced performance and maximum longevity. With rigorous in-house testing, the brand ensures superior fit and function across every product line. TRQ also provides customers with best-in-class, step-by-step installation videos—so you can complete repairs with confidence, whether you're a first-time DIYer or an industry professional.
Product Features
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
This part fits 25 vehicles spanning 1988-2000.
| Year | Make | Model | Description |
|---|---|---|---|
| 1999-2000 | Cadillac | Escalade | Cadillac Escalade Front with 295mm Diameter Front Rotors Ceramic Premium G-Coated Brake Pad & Rotor Kit TRQ Performance BKA12316 |
| 1992-1994 | Chevrolet | Blazer | Chevrolet Blazer Front with 295mm Diameter Front Rotors Ceramic Premium G-Coated Brake Pad & Rotor Kit TRQ Performance BKA12316 |
| 1988-1989 | Chevrolet | K1500 Truck | Chevrolet K1500 Truck with RPO Code F44 (Heavy Duty Brakes) Front with 6 Lug Wheels Ceramic Premium G-Coated Brake Pad & Rotor Kit TRQ Performance BKA12316 |
| 1990-1991 | Chevrolet | K1500 Truck | Chevrolet K1500 Truck Regular Cab with RPO Code F44 (Heavy Duty Brakes) Front with 6 Lug Wheels Ceramic Premium G-Coated Brake Pad & Rotor Kit TRQ Performance BKA12316 |
| 1992-1999 | Chevrolet | K1500 Truck | Chevrolet K1500 Truck Front Ceramic Premium G-Coated Brake Pad & Rotor Kit TRQ Performance BKA12316 |
| 1988-1998 | Chevrolet | K2500 Truck | Chevrolet K2500 Truck Front with 6 Lug Wheels Ceramic Premium G-Coated Brake Pad & Rotor Kit TRQ Performance BKA12316 |
| 1992-1993 | Chevrolet | Suburban K1500 | Chevrolet Suburban K1500 Front Ceramic Premium G-Coated Brake Pad & Rotor Kit TRQ Performance BKA12316 |
| 1994-1999 | Chevrolet | Suburban K1500 | Chevrolet Suburban K1500 V8 5.7L Front with 6 Lug Wheels Ceramic Premium G-Coated Brake Pad & Rotor Kit TRQ Performance BKA12316 |
| 1995-1997 | Chevrolet | Tahoe | Chevrolet Tahoe V8 5.7L 4 Wheel Drive Front Ceramic Premium G-Coated Brake Pad & Rotor Kit TRQ Performance BKA12316 |
| 1998-1999 | Chevrolet | Tahoe | Chevrolet Tahoe V8 5.7L 4 Wheel Drive without Police Package Front Ceramic Premium G-Coated Brake Pad & Rotor Kit TRQ Performance BKA12316 |
| 2000 | Chevrolet | Tahoe | Chevrolet Tahoe without Police Package Front with 11.13 x 2.75 Inch Rear Brakes with 295mm Diameter Front Rotors with Rear Drum Brakes Ceramic Premium G-Coated Brake Pad & Rotor Kit TRQ Performance BKA12316 |
| 2000 | Chevrolet | Tahoe | Chevrolet Tahoe without Police Package Front with 10.00 Inch Rear Drums with 295mm Diameter Front Rotors with Rear Drum Brakes Ceramic Premium G-Coated Brake Pad & Rotor Kit TRQ Performance BKA12316 |
| 1988-1991 | GMC | K1500 Truck | GMC K1500 Truck Regular Cab with RPO Code F44 (Heavy Duty Brakes) Front with 295mm Diameter Front Rotors Ceramic Premium G-Coated Brake Pad & Rotor Kit TRQ Performance BKA12316 |
| 1988-1991 | GMC | K1500 Truck | GMC K1500 Truck Extended Cab with RPO Code F44 (Heavy Duty Brakes) Front Ceramic Premium G-Coated Brake Pad & Rotor Kit TRQ Performance BKA12316 |
| 1992-1999 | GMC | K1500 Truck | GMC K1500 Truck Front Ceramic Premium G-Coated Brake Pad & Rotor Kit TRQ Performance BKA12316 |
| 1988-1998 | GMC | K2500 Truck | GMC K2500 Truck 7200LB GVW Front with 6 Lug Wheels Ceramic Premium G-Coated Brake Pad & Rotor Kit TRQ Performance BKA12316 |
| 1992-1993 | GMC | Suburban K1500 | GMC Suburban K1500 Front Ceramic Premium G-Coated Brake Pad & Rotor Kit TRQ Performance BKA12316 |
| 1994 | GMC | Suburban K1500 | GMC Suburban K1500 Front with 6 Lug Wheels Ceramic Premium G-Coated Brake Pad & Rotor Kit TRQ Performance BKA12316 |
| 1995-1997 | GMC | Suburban K1500 | GMC Suburban K1500 V8 5.7L Front with 6 Lug Wheels Ceramic Premium G-Coated Brake Pad & Rotor Kit TRQ Performance BKA12316 |
| 1998 | GMC | Suburban K1500 | GMC Suburban K1500 V8 5.7L Front with 295mm Diameter Front Rotors Ceramic Premium G-Coated Brake Pad & Rotor Kit TRQ Performance BKA12316 |
| 1999 | GMC | Suburban K1500 | GMC Suburban K1500 V8 5.7L Front with 295mm Diameter Front Rotors with 6 Lug Wheels Ceramic Premium G-Coated Brake Pad & Rotor Kit TRQ Performance BKA12316 |
| 1992-1994 | GMC | Yukon | GMC Yukon 4 Wheel Drive Front with 295mm Diameter Front Rotors Ceramic Premium G-Coated Brake Pad & Rotor Kit TRQ Performance BKA12316 |
| 1995-1997 | GMC | Yukon | GMC Yukon V8 5.7L 4 Wheel Drive Front with 295mm Diameter Front Rotors Ceramic Premium G-Coated Brake Pad & Rotor Kit TRQ Performance BKA12316 |
| 1998-1999 | GMC | Yukon | GMC Yukon 4 Wheel Drive Front with 295mm Diameter Front Rotors Ceramic Premium G-Coated Brake Pad & Rotor Kit TRQ Performance BKA12316 |
| 2000 | GMC | Yukon | GMC Yukon Front with Rear Drum Brakes Ceramic Premium G-Coated Brake Pad & Rotor Kit TRQ Performance BKA12316 |
| Brand Label | Part Number |
|---|---|
| Raybestos Brakes | EHT369H |
| Raybestos Brakes | MGD369CH |
| Bendix | PRT1453 |
| Raybestos Brakes | 5962 |
| Aimco | 55135 |
| Wagner | BD61812 |
| Aimco | 5569 |
| Raybestos Brakes | 580438 |
| DuraGo | BR5569 |
| Cadillac | 18029756 |
| Chevrolet | 18029806 |
| GMC | 18029756 |
| GMC | 18029806 |
| Chevrolet | 18029804 |
| Cadillac | 18029805 |
| Chevrolet | 89026844 |
| Chevrolet | 12321448 |
| GMC | 89026844 |
| Cadillac | 89026844 |
| Chevrolet | 18045905 |
| Dodge | 4874866 |
| Chevrolet | 18029805 |
| GMC | 18029805 |
| Chevrolet | 18029756 |
| Cadillac | 12321448 |
| Dodge | 4746371 |
| GMC | 12321448 |
| GMC | 18045905 |
| FMSI | CD369 |
| Raybestos Brakes | 580438P |
| Hollander | 530-01229 |
| Raybestos Brakes | 580438R |
| Raybestos Brakes | 5962P |
| Raybestos Brakes | 580438PER |
| Raybestos Brakes | 5962R |
| Raybestos Brakes | 580438FZN |
| Raybestos Brakes | 5962FZN |
This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com-- your source for quality replacement parts and the best service on the internet.
Hi, I'm Mike Green. I'm one of the owners of 1 A Auto. I want to help you save time and money, repairing and maintaining your vehicle. I'm going to use my 20 plus years' experience, restoring and repairing cars and trucks like this, to show you the correct way to install parts from 1 aauto.com. The right parts, installed correctly, that's going to save you time and money. Thank you and enjoy the video.
In this video, we're going to be doing a front brake job on this 1996 Chevy Tahoe. We show you obviously, the passenger side and the drivers side is going to be the same. Always replace your brakes in pairs. This is the same for the Tahoe, Suburban, and also the CK Pickups, Chevy and GMC alike. Tools you'll need are: jack and jack stands, a 22millimeter socket with a ratchet, or your tire iron, a 3/8 Allen wrench, combination wrench, a large hammer, wire brush, grease, as well as a torque wrench.
Start by removing your wheel. If you have a center cap or the lug covers, take them off carefully and then, if you don't have the benefit of air tools or impact tools as I do, you'll want to start with your vehicle on the ground, loosen the lug nuts, then raise it up, secure it and remove the lug nuts and the wheel. You can see our outer pad is actually getting a little bit thin, and on the front side, the disc is in pretty good shape, if you run your finger on it. On the back side there is a pretty good groove, we'll see what that's all about when we take it off. You want to take a large screwdriver or a pry bar and what happens is that as your brakes wear, the piston, right here, comes out of your caliper. To get your brakes apart, it helps if you force that piston back in. I'm taking a screwdriver and prying out on the caliper, and you can see that that forces the piston back in. With a good sized screwdriver, you can actually reset your pistons, pretty much all the way.
We want to remove the calipers, and back here, there are two 3/8s Allen bolts, one here and one right down here. I've got my 3/8s Allen wrench, I'm going to put it in, make sure it goes into the bolt as far as possible, then I'm going to use a regular crescent wrench on there for some extra leverage. Pull, ok, same thing for the top. I'm going to fast forward here as I finish removing those two bolts. Once you've got the bolts back out, your caliper comes off. You see your pads, the inside one just pulls right out. On the other one, put a screwdriver right in here, twist it and it comes right out. On your caliper, the bolts go through these sleeves, and those sleeves should slide pretty nice and easily. If they don't, you can use an extension and force them out, go easy though, you don't want to push too hard and have them fly right out, like that. You want to inspect these and see how worn they are. You can wire brush these, if there's some build up on them, you can wire brush these and reinstall them with a little bit of grease. This one was really difficult, this one here, I'm pushing much easier and takes a lot less to force it out.
If you want to better reset the pistons on your caliper, what you can do is put your old pad back in, take a C clamp, put it in place, tighten the clamp up, you will force that piston in the rest of the way. To remove the rotor, be very careful not to hit your studs, and if want to, you can put the lug nuts back on, that will help protect the studs from getting damaged. Usually a good hit breaks it loose. You can see on the backside, there's quite a bit of uneven wear. We will replace these rotors. New rotor from 1 A Auto, going on, in place. I like to put a lug nut right on, just to hold things where they should be.
You'll notice I'm working with new calipers. The owner of this vehicle wanted a new set put on the truck. Not always necessary, but make sure you reset the pistons, also check those sleeves, like I showed you earlier in the video, make sure the sleeves that the bolts go through are sliding nicely in the caliper. Take your inside pad, put it down in and press it in. Your outer pad, kind of slide it right down in. Just going to make sure these two shafts are back in at their starting point, looks like they're out a little bit.
I'm going to hit fast forward here. Put the bolts through, you might have to move the calipers a little back and forth to get them started. Use your Allen wrench to start them most of the way until you get them seeded. With an Allen wrench of this size, I'm basically pull it as tight as I can with that, should be about 25 to 30 foot pounds. Now you can remove that lug nut you have holding the disc on. Put your wheel on, start all your lug nuts by hand, then use a wrench to torque them, or tighten them preliminarily. Set the vehicle back down on the ground, and torque your lug nuts to 100 to 120 foot pounds. Put your cap back on, just use a socket to secure those caps. Very lastly and most importantly, make sure you pump your brakes and get a good firm brake pedal before you road test your vehicle.
We hope this helps you out, brought to you by www.1AAuto.com-- your source for quality replacement parts and the best service on the internet. Please feel free to call us toll free at 888-844-3393. We're the company that's here for you on the internet and in person.
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
In this video, we're going to show you how to replace the front brake calipers on this 1996 Chevy Tahoe, same as most Chevy and GMC trucks and SUVs from this time period, basically '88 to '98.
Calipers can need to be replaced because they start leaking or because they get sticky and you can't service the sleeves that the calipers slide on. The tools you'll need are jack and jack stands, 22mm socket and ratchet or your tire iron, 3/8 Allen wrench, an additional combination wrench, an 11mm wrench and then a tube, a small bottle and some extra brake fluid.
Start by removing your wheel, if you have a center cap or the lug covers take them off carefully and then if you don't have the benefit of air tools or impact tools as I do, you'll want to start with your vehicle on the ground, loosen the lug nuts, then raise it up, secure it and remove the lug nuts and the wheel. You're going to want to loosen this 11mm bolt that holds the line into the caliper. You want to take a large screwdriver or a pry bar, and it helps if you kind of force that piston back in, so I'm taking a screwdriver and prying out on the caliper.
Now we want to remove the calipers and back here there are two 3/8 inch Allen bolts, one here and then one right down here. I've got my 3/8 inch Allen wrench, I'm going to put it in, and make sure it goes into the bolt as far as possible. Then, I'm going to use a regular crescent wrench and put that on there for some extra leverage and then pull. Same thing for the top. I'm going to fast forward here as I just finish removing those two bolts .Once you've got those bolts backed out, then your caliper comes off. Take our 11mm socket, and you want to have a catch pan or something underneath because you are going to get brake fluid coming out of here.
Remove your bolts, make sure both of these copper washers come off. Now take your new caliper, put it right up here. You want to take your bolt, put one of the new crush washers on it, the bolt goes through from the same side as where your line bends to then you want to put the line, oops, you want to .obviously you put the other crush washer on the other side. A little clarification here: the new caliper should come with new copper crush washers so you put one onto the bolt then put the bolt through the line and then put a crush washer on the bolt on the other side so that you have a washer in between the bolt head and the line and then a washer between the line and the caliper. Put the line on and you want the line pointing to where that bleeder valve is. The bolt should go in nice and easy. Tighten it up just a little bit so that it stops leaking.
Now use a paper towel or a rag to wipe away the excess fluid. If you're going to be putting the same rotors back on, make sure you use some brakes part cleaner or mineral spirits and clean off the rotors. Your caliper can start leaking at any time so you don't always need to replace the brakes but as you can see here we're doing everything at once so that's why you're noticing new rotors and pads and everything. If you want to see the whole procedure of replacing your rotors and pads, just check out our other videos for doing the front brake job on this truck.
Take your inside pad, put it down in. Press it in. Your outer pad, take it and you just slide it and put it down and in. I'm just going to make sure these two shafts are back in at their starting points. It looks like they're set up out a little bit. Put this right on. I'm just going to hit fast forward here, put the bolts through, you might have to move the calipers just a little bit back and forth, get them started and then, use your Allen wrench to start them most of the way until you get them seeded. Generally, what I do is with an Allen wrench of this size, I basically pull it as tight as I can with that; it should be about 25 to 30 foot pounds.
Once you replace your caliper or calipers, pump your brakes and try to get as much pressure into the lines as possible. Be sure to check your brake fluid before you bleed as well periodically while you are bleeding. We've got plenty in there right now. Here's your bleeder valve, take this little cap off, put a wrench on, 10mm, counterclockwise is open, clockwise is closed. I'm going to put this, got a little bit of brake fluid in the bottom of a small bottle, put the hose on there. I've got an assistant in the car, I'm going to tell him to step on the brakes and then I'll loosen this up and then they'll let go of the brakes and I'll tighten it back up. Okay, hit the brakes. You watch the air come out. Let off. Hit the brakes. I can see some fluid coming out. Let off. Hit the brakes. Let off. Now repeat that for the other side. Now after you bleed them, stand on the brakes. Have your assistant put pressure on the brakes, check the backside, make sure you're not leaking at all. Make sure you top off your brake fluid now.
Now we're going to speed through putting the wheel and tire back on. Make sure you do torque them, torque the lug nuts to 100 to 110 foot pounds and always after you do work on your brakes just make sure that you pump them and make sure that they're working before you go out and road test. Just do a stop from 5 miles an hour and 10 miles an hour to make sure everything is in good order.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Parts went on easy. Just as described. Brakes are quiet and smooth when slowing down.
Easy install on 1995 Tahoe 6.5 TD. Modern look.
The rotors were good quality, but the performance rotors were too thick for my 88' GMC K1500 pickup truck. The return process was quick and simple.
Perfect fit, great price and fast shipping.
These work well. I have only had them on the vehicle for less than one month, so I can't speak for the longevity. Not loud and pretty smooth so far!
Brakes squeaking after 2 weeks of usage.
The parts were awesome. They fit perfectly. No issues during install. A1 had to send me the parts twice when the first order never arrived even though UPS said they were delivered. A1 is awesome to deal with, they make it very easy and stand behind their products and service.
Order was accurate and timely.
they came out really good better then the rotos and break pads i had before for sure for sure.
Very good and very low brake dust of any at all is noticeable
BKA12316
Please enter your vehicle's year make and model in the search bar at the top of the page. This will display parts guaranteed to fit your vehicle. Just be sure to verify all of the information shown in the Vehicle Fit tab before ordering.
This should be able to fit as long as your vehicle has RPO Code F44 (Heavy Duty Brakes). Please do not hesitate to contact us with any further questions.
Usually ceramic are more expensive, but prices are a result of market conditions that are often outside of our control. Please let us know if you have any further questions.
