This front end kit is the best the market makes.
Went into a 2010 Chev Suburan K1500 LTZ. Upper and lower control arms already had ball joints pressed in.
All parts are much better then original car rides completely different.
Replaces
Part Details
Specifications
Product Features
What are Tapered Bearings and Why Use Them? Tapered bearings use rollers shaped like flat-topped cones and two races angled from the outside in of the bearing. This angle makes the bearing better at handling forces exerted on the bearing during cornering (known as axial load) in trucks and large cars. Your model came from the factory with tapered bearings. Roller ball bearings work well for smaller cars, but replacing a tapered bearing with a roller ball bearing increases wear and failure.
TRQ drivetrain kits are manufactured using premium raw materials to restore original performance. Each TRQ drivetrain component is designed to be a direct, maintenance-free replacement to the stock unit. To extend the service life of your drivetrain, TRQ recommends replacing wheel hubs, bearings, and constant velocity (CV) drive axles at the same time to ensure even wear of components and improved ride comfort. All products are fit and road-tested in our Massachusetts R&D facility to ensure we deliver on our promise of Trusted Reliable Quality.
Install Tip: When replacing steering components, have a professional alignment performed afterwards. This ensures proper tracking and even tire wear.
Our steering and suspension components are pre-greased and sealed for long life and do not require the extra maintenance typically required by greaseable versions.
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
PSA58882
We have a few different aftermarket companies build these parts specifically for us, as our 1A Auto house brand. They are manufactured to the same OEM specifications as the original part that came with your vehicle. If you have any further questions, please don't hesitate to ask.
Same question here. Any answers?
I have a 4x4 and they have worked great. No issues and oem quality without the high price. Don't hesitate to buy from 1aauto I've been customer for years now and have nothing but positive experiences.
We have a few different aftermarket companies build these parts specifically for us, as our 1A Auto house brand. They are manufactured to the same OEM specifications as the original part that came with your vehicle and are covered by a two year warranty. If you have any further questions, please don't hesitate to ask.
It will work, the CV shafts dislocate easily (not that hard to fix but it is messy) so be careful while installing. If you have it stock the control arms will work if it has more than a 2.5” leveling lift they’ll be too short.
It will work for the late 2007 through 2013. Just have to make sure you don’t dislocate the CV shafts (I did a few times it’s easy but messy to fix). If you have any lift higher than a 2-inch leveling kit the control arms will be too short. Everything else has held up well for over a year on my daily beater.
Thank you for the inquiry. Our steering and suspension components come pre-greased, sealed for long life, and do not require the extra maintenance typically required by greasable versions.
i rei really have no idea-i installed them on a stock silverado
This suspension kit will not be compatible on vehicle that are modified with a lift.
