★★★★★
December 27, 2022
These supports fit and work well. My old ones would not hold the window up in cold weather and that problem is gone now.
Replaces
Install Tip: Keep & reuse your original hardware, new hardware is not included with this item.
Attention California Customers:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
This part fits 12 vehicles spanning 1994-1999.
| Year | Make | Model | Description |
|---|---|---|---|
| 1999 | Cadillac | Escalade | Cadillac Escalade Driver & Passenger Side 2 Piece Back Glass Lift Support Set Tuff Support 1ALSP00116 |
| 1994 | Chevrolet | Blazer | Chevrolet Blazer Driver & Passenger Side 2 Piece Back Glass Lift Support Set Tuff Support 1ALSP00116 |
| 1994-1999 | Chevrolet | Suburban C1500 | Chevrolet Suburban C1500 Driver & Passenger Side 2 Piece Back Glass Lift Support Set Tuff Support 1ALSP00116 |
| 1994-1999 | Chevrolet | Suburban C2500 | Chevrolet Suburban C2500 Driver & Passenger Side 2 Piece Back Glass Lift Support Set Tuff Support 1ALSP00116 |
| 1994-1999 | Chevrolet | Suburban K1500 | Chevrolet Suburban K1500 Driver & Passenger Side 2 Piece Back Glass Lift Support Set Tuff Support 1ALSP00116 |
| 1994-1999 | Chevrolet | Suburban K2500 | Chevrolet Suburban K2500 Driver & Passenger Side 2 Piece Back Glass Lift Support Set Tuff Support 1ALSP00116 |
| 1995-1999 | Chevrolet | Tahoe | Chevrolet Tahoe Driver & Passenger Side 2 Piece Back Glass Lift Support Set Tuff Support 1ALSP00116 |
| 1995-1999 | GMC | Suburban C1500 | GMC Suburban C1500 Driver & Passenger Side 2 Piece Back Glass Lift Support Set Tuff Support 1ALSP00116 |
| 1995-1999 | GMC | Suburban C2500 | GMC Suburban C2500 Driver & Passenger Side 2 Piece Back Glass Lift Support Set Tuff Support 1ALSP00116 |
| 1995-1999 | GMC | Suburban K1500 | GMC Suburban K1500 Driver & Passenger Side 2 Piece Back Glass Lift Support Set Tuff Support 1ALSP00116 |
| 1995-1999 | GMC | Suburban K2500 | GMC Suburban K2500 Driver & Passenger Side 2 Piece Back Glass Lift Support Set Tuff Support 1ALSP00116 |
| 1995-1999 | GMC | Yukon | GMC Yukon Driver & Passenger Side 2 Piece Back Glass Lift Support Set Tuff Support 1ALSP00116 |
| Brand Label | Part Number |
|---|---|
| DIY Solutions | BHS03838 |
| DIY Solutions | BHS00101 |
| Tuff Support | 613137 |
| NAPA | 819-5642 |
| Mighty Lift | 95730 |
| Stabilus | 4B030091 |
| Stabilus | 030091 |
This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and the next time you need a part for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the rear hatch support pistons on this 1996 Chevy Tahoe. This is pretty much the same for any Tahoe, Yukon, Yukon XL, or Suburban that has the rear tailgate and lifting rear glass. We're going to show you on the left side, but the right side is the same procedure. We do recommend you do this in pairs. You'll need new support pistons from 1AAuto.com and a small flat blade screwdriver, as well as somebody or something to hold up the glass while you're doing the repair.
There's just clips that go around the end. You pry the clip out with a small screwdriver. Again, have somebody helping you hold it up. Pry the clip out. Pull the piston off, and then do the same thing for the other end. Here, you can see there's the original one on top.
The new one from 1A Auto is on the bottom. It's going to install just the same as the original. Put the piston and push it onto the stud. Then you might have to turn it a little bit to get it to line up. Push the other end on, do the other side, and you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
These supports fit and work well. My old ones would not hold the window up in cold weather and that problem is gone now.
They are working perfectly
Better than the original! Easy to install! I don't know why I waited so long to change mine.
I have a 2 door Chevy Tahoe 4x4 with a rear hatch. These pistons fit and work perfectly, great product. Texas
Love how my glass stays up
Took 2 minutes max to replace both sides. Works great! I believe 1A had an instructional video on replacing these that I watched an was very helpful.
Got tired of my head bumping into my window and finally ordered the lifts. Fixed my sagging rear window. Supports were exact fix and work better than the originals. Would buy again and highly recommend them. Rob
I installed the 1ALSP00116-Lift Supports on my 1996 Tahoe and they work perfectly. It took me about 5 minutes to install the lift supports and I am very happy with them. As always 1A autos installation video was very helpful. Thanks again!
