Replaces
Part Details
Install Tip: Keep & reuse your original hardware, new hardware is not included with this item.
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
This video is brought to you by 1AAuto.com your source for quality replacement parts and the best service on the internet.
Hi, I'm Mike Green. I'm one of the owners of 1A Auto. I want to help you save time and money repairing and maintaining your vehicle. I'm going to use my 20 plus years of experience, restoring and repairing cars and trucks like this to show you the correct way to install parts from 1AAuto.com. The right parts installed correctly that's going to save you time and money. Thank you and enjoy the video.
In this video we'll be showing how to replace the rear hatch struts on this 2003 GMC Yukon. This is the same for any 2000 to 2006 Yukon Tahoe or Suburban Yukon XL.
The only tool you'll need is a small flat blade screwdriver.
If you have a droopy tailgate, you're probably no stranger to this: a broom holding up the tailgate. It's really easy to fix.
What you need is a small flat blade screwdriver and you'll work it into the clips by the rods. It's not a bad idea to have a helper holding up the tailgate. Pull these clips out a little bit and then pull the stabilizer off. Same thing for the bottom pull the clip off.
At 1A Auto we have the exact stabilizers that you need. They'll come with the clips in them. All you do is put them back on the clips. Make sure you have the cylinder side up and that it's on tight. On the bottom one, you'll want to lift up on your tailgate. After you do that the tailgate will stay up on its own.
We hope this helps you out. Brought to you by www.1AAuto.com your source for quality replacement parts and the best service on the internet. Please feel free to call us toll free 888-844-3393. We're the company that serves you on the internet and in person.
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and the next time you need a part for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the rear glass support pistons on this 2002 Chevy Suburban. We show you on the passenger side, but the driver side is the same procedure. The items you will need for this is new rear glass support pistons from 1AAuto.com and a flat blade screwdriver.
At the top and bottom of the piston, you'll see these clips. You just have to pry out on them while pulling it from the stud. Make sure you have someone or something safely securing the tailgate glass. Just pry out the clip and pull the piston from the stud. Do the same thing up here.
On the bottom is the old piston; above it is the new one from 1A Auto. You can see they're identical, and they'll fit exactly the same. Take your new piston and just push both ends on to those studs and you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Don from 1A Auto. I hope this how-to video helps you out, and the next time you need a part for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the rear hatch support struts on this 2002 Suburban, same as any 2000 to 2006 Suburban. These commonly go bad and your hatch won't stay up on its own. The only tools you'll need are new hatch support struts from 1AAuto.com and a small flat blade screwdriver - as well as someone or something to hold the hatch up.
These four struts are held in by little clips that you just pry out with a small flat blade screwdriver, here and there. You'll want something or someone to hold the hatch up while you pry out and pull off one end of the piston. Then, repeat that for the lower one pry out and pull off. We do always recommend you do this in pairs.
Put them back on, just make sure the clips are in place on your new ones, and press it on the top. You may need to lift up tailgate a little bit and press the bottom one off.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
