Replaces
Part Details
Specifications
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
BHA53805
The sensor is in the hub that the bearing fits into the magnet is in the new bearing so I guess yes it comes built in to the bearing Yes
Thank you for your inquiry! These parts will not have an ABS wire attached to them. They will be equipped with an encoder ring built into the bearing which will match your original unit. Please let us know if you have any further questions, thank you.
ABS is built into wheel bearing the wired part is fastened to the spindle assembly BUT it’s almost impossible to remove from spindle assembly without destroying it especially in the rust belt (Midwest).
The fitment of these parts will not be specific to AWD or FWD. As long as your vehicle specifications match up with our listing, these parts will directly fit and function like the originals.
If you can provide us with the full year, make and model we can check for you!
Thank you for the inquiry. Yes, the set of 4 will be TRQ. The item number for this set of 4 is BHA53805 with TRQ. All of the hubs will be TRQ hubs. If you have any additional questions please let us know.
