★★★★★
June 17, 2025
Took a bit of twisting to get to seat all the way but it works fine. Needs wire diagram since colors on old are faded but found on line .
Replaces
Part Details
Specifications
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Returns: Parts with electrical components cannot be returned once installed.
Attention California Customers:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
This part fits 6 vehicles spanning 2005-2009.
| Year | Make | Model | Description |
|---|---|---|---|
| 2005-2006 | Chevrolet | Equinox | Chevrolet Equinox with Updated Design EGR Valve with 5 Terminal Connector EGR Valve & Tube Kit DIY Solutions ESS00155 |
| 2007 | Chevrolet | Equinox | Chevrolet Equinox with 5 Terminal Connector EGR Valve & Tube Kit DIY Solutions ESS00155 |
| 2008-2009 | Chevrolet | Equinox | Chevrolet Equinox V6 3.4L with 5 Terminal Connector EGR Valve & Tube Kit DIY Solutions ESS00155 |
| 2006 | Pontiac | Torrent | Pontiac Torrent with Updated Design EGR Valve with 5 Terminal Connector EGR Valve & Tube Kit DIY Solutions ESS00155 |
| 2007 | Pontiac | Torrent | Pontiac Torrent with 5 Terminal Connector EGR Valve & Tube Kit DIY Solutions ESS00155 |
| 2008-2009 | Pontiac | Torrent | Pontiac Torrent V6 3.4L with 5 Terminal Connector EGR Valve & Tube Kit DIY Solutions ESS00155 |
| Brand Label | Part Number |
|---|---|
| DIY Solutions | BSS00928 |
| DIY Solutions | ESS00321 |
| Airtex Engine Management | EGR1147 |
| Dorman | 598-201 |
| Standard Motor Products | S-605 |
| Airtex | 4F1051 |
| SMP | EGV612 |
| Delphi | EG10172-11B1 |
| Standard Ignition | S-605 |
| Dorman - OE Solutions | 598-201 |
| General Motors | 12602507 |
| Standard Ignition | EGV612 |
This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
Created on:
Tools used
Hi, I'm Mike from 1AAuto. We've been selling auto parts for over 30 years! We're dedicated to delivering quality auto parts, expert customer service, and fast and free shipping, all backed by our 100% satisfaction guarantee. So visit us at 1AAuto.com, your trusted source for quality auto parts.
In this video, we're going to be working with our 2008 Chevy Equinox 3.4-liter V6. We're going to show you how to remove and replace your EGR tube.
If you like this video, please click Subscribe. We have a ton more information on this and many other vehicles. If you need this part for your car, you can follow the link down in the description over to 1AAuto.com.
Here are the items you'll need for this repair.
Remove the oil fill cap. Grab the bottom portion of the fill tube here, turn that counterclockwise as well. Move that. The connector on top of your EGR valve is also going to be in the way, if removing your engine cover. This is a little plastic tab in here. Now, these are really prone to breaking, so I like to push down on that tab with a pick and just remove the safety from the connector completely, so we don't risk breaking it and having it be less secure when we reinstall. Push down on the tab, and remove the electrical connector from your EGR. Simply pop up, and remove your engine cover.
Remove the three bolts securing the EGR tube onto both the exhaust manifold and the EGR solenoid. We'll remove the top one with a 10 millimeter socket and ratchet and use an extension on the bottom two for a little more clearance. We soaked ours in penetrating oil for about 5, 10 minutes before we tried this, just to make sure that these bolts wouldn't snap. Remove the EGR tube.
Here we have our old EGR tube that we removed from our vehicle and our new part from 1AAuto.com. As you can see, these parts are exactly the same. These joints aren't quite on there at the moment because these need to be aligned and then this will be crushed to help seal everything together nice and tight. Same thing on the bottom there. This joint moves until we set it where we want it. A cracked EGR tube or a clogged EGR tube will cause improper flow to your EGR valve, creating emissions issues and codes in your vehicle. Whereas one being cracked or broken will create a loud noise usually because it's exhaust coming out without going through the muffler which quiets down that noise, and it'll also have a bad exhaust smell underneath the hood. If your EGR tube is cracked, broken, or clogged, this new part from 1A Auto will go in direct fit just like your original equipment and fix you up right.
A good trick for lining up this gasket when we install it is if the holes are the right size we can actually get the thread started into the gasket a little ways. It'll help make sure it doesn't move when we go to install it back onto the exhaust manifold. These do rotate and are flexible. We'll set the bottom in. Just get a couple of threads going there just to keep it pretty close to in place. Then we'll tweak it and line the top up if we can. Start that bolt as well in, just a couple of threads because we don't want to lock anything down yet. Once all that's started and everything's seated, we can tighten it all up with our 10 millimeter socket and ratchet.
Reinstall the engine cover. These bushings sit on top of these two pegs here. Snap both of those into place. Reinstall the oil fill tube, as well as the cap. Reconnect the electrical connector for the EGR, and again, I remove these safety clips. Pop that back in if you did the same thing.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
Tools used
Hi, I'm Mike from 1AAuto. We've been selling auto parts for over 30 years! We're dedicated to delivering quality auto parts, expert customer service, and fast and free shipping, all backed by our 100% satisfaction guarantee. So visit us at 1AAuto.com, your trusted source for quality auto parts.
In this video, we're going to be working with our 2008 Chevy Equinox 3.4-liter V6. We're going to show you how to remove and replace your EGR and EGR tube together. This is for the non-updated EGR or the old style EGR where the new styles will require splicing and modification to the harness as well as a software update from your local GM dealer.
If you like this video, please click Subscribe. We have a ton more information on this and many other vehicles. If you need parts for your car, you can follow the link down the description over to 1AAuto.com.
Here are the items you'll need for this repair: pick, 10mm socket, ratchet, extension
Remove the oil fill cap. Grab the bottom portion of the fill tube here, turn that counterclockwise as well. Move that. The connector on top of your EGR valve is also going to be in the way, if removing your engine cover. This is a little plastic tab in here. Now, these are really prone to breaking, so I like to push down on that tab with a pick and just remove the safety from the connector completely, so we don't risk breaking it and having it be less secure when we reinstall. Push down on the tab, and remove the electrical connector from your EGR. Simply pop up, and remove your engine cover.
Remove the three bolts securing the EGR tube onto both the exhaust manifold and the EGR solenoid. We'll remove the top one with a 10 millimeter socket and ratchet and use an extension on the bottom two for a little more clearance. We soaked ours in penetrating oil for about 5, 10 minutes before we tried this, just to make sure that these bolts wouldn't snap. Remove the EGR tube.
With the EGR tube out of the way, remove the two 10 millimeter bolts on the EGR solenoid. We'll do this using a 10 millimeter socket and ratchet. With the bolts removed, you can remove your EGR from the intake manifold.
Let's put the bolts from the EGR through the new valve. Place the gasket on there to make sure it doesn't move and it's going to make it a lot easier to line this up. Line up the two bolts. Start both of those in by hand and we'll tighten those back down with our 10 millimeter socket and ratchet.
A good trick for lining up this gasket when we install it is if the holes are the right size we can actually get the thread started into the gasket a little ways. It'll help make sure it doesn't move when we go to install it back onto the exhaust manifold. These do rotate and are flexible. We'll set the bottom in. Just get a couple of threads going there just to keep it pretty close to in place. Then we'll tweak it and line the top up if we can. Start that bolt as well in, just a couple of threads because we don't want to lock anything down yet. Once all that's started and everything's seated, we can tighten it all up with our 10 millimeter socket and ratchet.
Reinstall the engine cover. These bushings sit on top of these two pegs here. Snap both of those into place. Reinstall the oil fill tube, as well as the cap. Reconnect the electrical connector for the EGR, and again, I remove these safety clips. Pop that back in if you did the same thing.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
Took a bit of twisting to get to seat all the way but it works fine. Needs wire diagram since colors on old are faded but found on line .
The original valve itself became defective. Never seemed to work properly. Also the gasket does no fit on the tube where it meets the exhaust manifold. 1AAuto was absolutely amazing with there customer service though and took care of me. Honestly could not believe how great they were to deal with. The 2nd kit I recieved appears to be working properly and I noticed the valves were not formed the same. Or the first one was just completely off. And another thing with this kit is that the new plug wires don't match the colors on the car. So I just matched the letters abcde on the plugs to each other and hope it's right. Lol
This is the exact part we needed and it was reasonably priced.
Cheap, soft aluminum body. Cracks with the slightest pressure from the mounting bolts. Mine came missing the tube to valve mounting bolt. The box clearly states there are 3 items inside, but only contained the valve and gasket. No bolt.
Fixed exhaust leak but now check engine light is on! ???
Had to replace both when tube went bad and GM had service bulletin change(not recall). Both parts fit as should and didn't have to reprogram to get check engine light off. I;m happy
I was pleasantly surprised at the promptness of my order being executed and sent on the same day of my order. I will definitely recommend your company and use again in the future. And everything was packaged well so as not to be damaged in shipping. Great job!!
once again I buy Pirates get what I need for a shot free shipping and they're good quality Pirates which is outlasted the same NAPA parts that I used locally and paid twice as much. Great service fast shipping free of charge and excellent people to deal with. Write
This retrofit EGR valve and tube fit my 2005 Equinox perfect and was easy to install. Found the wiring diagram for the new harness on the internet and was completed in less than an hour. Getting the old one off was another story!!
Follow the old wire routing. The wires no matter what color should go in the same slots / connector landing points .So the routing will be that same no matter what color wires.
Written and video installation instructions are found on the product page under the "How-To & Tools" tab. We're constantly adding new installation video instructions. If we do not have one for your vehicle on the product listing page, please check again at a later time or check our Video Library to see similar repairs here: <a href="https://www.1aauto.com/videos" target="_blank">https://www.1aauto.com/videos</a>
This will not come with a wiring diagram but a Hanes manual should be able to assist you with the installation.
