★★★★★
April 29, 2025
Product was factory fit look original easy install only took a few minutes
Replaces
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
The bulbs are for testing and not covered under our warranty. Our warranty applies to the light assembly only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to service the bulbs as well as replace the entire fog light assembly on this 2002 Chevy Suburban. It's the same part in some of the process on these Suburbans from 2000 to 2006. We show you on the driver side, but the passenger side is the same procedure. The items you'll need include a new fog light from 1AAuto.com, a 10mm socket, and a ratchet.
To change your fog light bulb, you'll just reach in behind the fog light. Life up the tab on the harness, pull it free and twist your bulb out. Take your new bulb, twist it back in clockwise, and reconnect your harness.
Now, to replace your entire assembly, you want to disconnect this harness by pulling up the tab and pulling it free. Then you want to remove these two 10mm bolts up on top of the fog light. We'll just fast-forward as Don does that. Once those are removed, the fog light will pull down and out.
On the left is the old fog light; on the right is the new one from 1A Auto. You can see they're identical, and will fit exactly the same. Take your new fog light and push it back into place. Then replace those two 10mm screws. We'll fast-forward as Don does this. Reconnect your harness, and you're all set.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
GM308-B000L
Product was factory fit look original easy install only took a few minutes
Easy installation
Great fit! Came with a test bulb which is great because I forgot to buy a new bulb. Will replace as soon as it goes out! Quality and constrictions was phenomenal! Great product!
As with every part I have ordered, they have been the right part. Never a problem with getting part to fit or make adjustments to get it to fit.
Great Fog Light, an exact match to factory equipment on my 2002 Tahoe, quick and easy installation and you can't beat the warranty that 1 A Auto extends on this product. I actually was replacing at no charge a fog light I had purchased two years ago that the lens had fallen out of, no questions and no hassle, My first warranty experience with 1 A Auto. , The sales representative could not have been more helpful replaced the fog light with one call to through there toll-free number.
$40 cheaper than local auto zone, literally. Had what I needed in stock and quick delivery. Correct parts and a recommended site to purchase from.
Very easy to install and the part I needed for my truck. This company even provides a video that teaches you how to install it. Impressed with the customer service.
Video was right on and part was perfect fit. Easy fix.
New unit fit exactly like the old one I took out. Easy to install and aim. Quality looked the same also. I used my old bulb and connection to make things really easy THANKS!!!!
