★★★★★
March 31, 2026
2002 Ford Ranger
Perfect fit and it only took 15 minutes to remove and install both headlamps.
Replaces
About TRQ:
TRQ is a trusted brand dedicated to making every repair a success story by combining premium parts with easy installation. Each TRQ part is engineered by a team of automotive experts to meet or exceed OEM standards, delivering enhanced performance and maximum longevity. With rigorous in-house testing, the brand ensures superior fit and function across every product line. TRQ also provides customers with best-in-class, step-by-step installation videos—so you can complete repairs with confidence, whether you're a first-time DIYer or an industry professional.
Product Features
Product Features
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
This part fits 4 vehicles spanning 2007-2014.
| Year | Make | Model | Description |
|---|---|---|---|
| 2007-2013 | Chevrolet | Avalanche | Chevrolet Avalanche Driver & Passenger Side 2 Piece Headlight Set TRQ Performance HLA71032 |
| 2007-2014 | Chevrolet | Suburban 1500 | Chevrolet Suburban 1500 Driver & Passenger Side 2 Piece Headlight Set TRQ Performance HLA71032 |
| 2007-2013 | Chevrolet | Suburban 2500 | Chevrolet Suburban 2500 Driver & Passenger Side 2 Piece Headlight Set TRQ Performance HLA71032 |
| 2007-2014 | Chevrolet | Tahoe | Chevrolet Tahoe Driver & Passenger Side 2 Piece Headlight Set TRQ Performance HLA71032 |
| Brand Label | Part Number |
|---|---|
| Chevrolet | 22853025 |
| Chevrolet | 22853026 |
| Partslink Numbering System | GM2502263 |
| Partslink Numbering System | GM2503263 |
This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
Created on:
Tools used
Hi, I'm Mike from 1A Auto. We've been selling auto parts for over 30 years. We're dedicated to delivering quality auto parts, expert customer service, fast and free shipping, all backed by our 100% satisfaction guarantee. Visit us at 1AAuto.com, your trusted source for quality auto parts.
Start by opening the hood. We are going to replace these headlights on this 2009 Suburban. It's got some cracking in there, and some just pitting and scratches and sun damage, so we're going to replace these with new headlights.
We'll start by loosening these 10mm bolts on top. These headlamps are held in with two bolts on the top, and one hidden bolt that's behind the bumper here.
So that we don't damage any of the paint on the bumper when we pull the headlight out, we're going to put some masking tape here.
So we're going to peel this splash shield back, so we can get up behind, into the screw, the lower bolt, that is holding on the headlight. It also will make it easier if you turn your wheel to the inside on whatever side you're working on, so you can open this up.
It’s held in with some 7mm self-tapping screws and some push clips. I'm going to start with the 7mm self-tapping screws. Using a flat bladed screwdriver, or trim clip tool, we're going to work these barbed clips out. Then fold this up.
So, with this splash shield pulled back, now you can see the lower screw that's holding in the headlamp. This screw down here is a 10mm, just like the top ones. The hole that it goes through in the headlamp is slotted in, open. So, I'm not going to totally remove it, I'm just going to loosen it just enough so that the tab, or the ear, on the end of the headlamp will be loose, and we can pull it off from the front. You don't have to go too much, I just want to make sure there's enough room for it to slide freely. That looks pretty good.
The next step is you have to pull the bumper off of this clip. There's a bracket in here that the plastic bumper snaps in to. You're going to grab the bumper, give it a good tug. Just like that. So now, with all these bolts loose, and the lower bolt loose, and this bumper spread down a little bit, we're going to pull the headlamp out. It's got two locating tabs here, and there's another clip-tab in the back that it's going to pull off of those, so you're going to have to wiggle it back and forth, maybe a little bit. This one came out pretty easy. Move the bumper around.
With the headlamp out, you can see the electrical connector here. When I push in this lock, you can remove it.
Here we have our old headlamp out of the vehicle. As you can see it's all crazed and cracked and UV damaged. This is our new headlamp, from 1AAuto.com. It's nice and clear, clean. It comes with bulbs, all the bulbs that you need, already installed. Here we can look at the old headlamp. Here are the upper mounting tabs, they are the same. You've got your clip in tab here, also the same. You've got your lower, locating tab. That is the same. We've got our ears here. On the new headlamp, these are all the same, and these locating pins on the side. So, this headlamp will fit in there nicely, and give you great vision going down the road.
When reinstalling the headlamp, this tab here needs to go into this bracket here. This tab under here, needs to go underneath this locating tab. These two locating tabs are going to fit in to the fender, here. It takes some maneuvering to get this in here.
I'm actually going to plug in the headlamp right now. Yeah, you just sort of got to maneuver it in there. Then just push on it a little bit, to get past the bumper grill. So now, as we're getting close here, we want to make sure we get these two tabs in to the fender. Then push in, that should lock it in the tab that's in the back, or bracket, rather. This lower tab has slid over the screw, so that's great.
Now I'm ready to reinstall these upper 10mm bolts. You might have to give the headlight a little push, to get it in position. I’ll use my 10mm socket. Just go until you feel these get tight. Finish off the top one. Now I'm going to tighten the lower bolt. It's up in here; it's a 10mm. I'm just going to make sure the headlamp was seated all the way in.
While you've got this bumper loose, now is a good time remove your masking tape. Now you can put the bumper back into the bracket. Just push it in until it clicks. Time to reinstall the splash shield. The barbed clips are going to go in first; just push those in. Take your 7mm bolts. I’ll switch to my ratchet. If you need to adjust the aim on this headlight, the adjuster's right here. It takes a 5 mm Allen Key. On the passenger side, the adjuster is in the same spot, but this is on the original headlamp. It's just a little bit different.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
Perfect fit and it only took 15 minutes to remove and install both headlamps.
Perfect fit. Makes the front of my Suburban look new and now I can see much better at night. Thanks 1A Auto!
Was quoted $1500 to replace the headlamp assembly by my local dealer. Literally told him to stick it where the sun don't shine. After finding the part and for a fraction of the cost. I was anle to install both assemblies in inder 2 hours.Fit just right. Relatively easy to install. Just follow the youtube video
I ordered a set of these headlights to replace the faded originals. They arrived quickly, fit like the original headlights and make our suburban look like we care. I might of got lucky as I didn't need to adjust the lights, but the adjustment screw is located in the same locations as the OEM, which is nice. Good job on the video, it made the replacement process easy. The headlights brighten to road well too.
Great quality headlight that felt as good as the oem for only a fraction of the price. The video on TRQs YouTube channel really made this job effortless for me and I greatly appreciate it. Would highly recommend this company to anyone!
Very good choice. Fit perfectly and they make my 2009 Suburban look young again! LOL. Glad I bought these.
Lights are fine for a cheaper alternative to OEM lights. Made in Taiwan so if your looking for American made these aren't for you
Great service on shipping. I have not installed yet. Will let you know when I do.
Great part- looks amazing and night time driving is improved! These headlights will make your vehicle 'pop' as you walk up. Watch the video- a little 'arm-wrestling' on the install- watch the video.
Perfect fit
HLA71032
Thank you for your question! We do offer a pair that has the addition of an LED C-light bar (HLA71033), but the main bulbs are all still halogen. We do not offer a set that is all LED.
New light bulbs are not included with this assembly. Occasionally, manufacturers leave test bulbs in the lights. If you receive test bulbs, you'll want to replace them with your original bulbs or with new bulbs.
Bulbs are not included. If the assemblies include bulbs, they are for testing purposes only and would need to be swapped.
