Replaces
Part Details
Specifications
Product Features
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com your source for quality replacement parts and the best service on the internet.
Hi. I'm Don from 1A Auto. I hope this how to video helps you out, and the next time you need a part for your vehicle think of 1AAuto.com. Thanks.
In this video we're going to show you how to replace a headlight assembly on a 2006 Chevy Impala. It's virtually the same for the right side and the left side as well as model years 2006 through 2012. In order to do this you'll need a 7mm socket and socket wrench as well as a new headlight assembly from 1A Auto. We'll also show you how to service the bulbs inside the headlight assembly as well. We're going to be doing the driver side headlight, it's basically the same for the passenger side.
Locate the one 7mm fastener right there, as well as the white clip right there. I'm using a 7mm deep socket with a socket wrench to remove that fastener there. I'll go ahead and fast-forward as I do that. Once you got that out, go ahead and pull upon that white bar, and pop it off the two hooks on the back of the headlight assembly. Go ahead and pull out your headlight assembly.
In this clip here, we're going to show you how to service the bulbs, and their all pretty much the same style of installation. In taking it out, you're just going to twist the bulb socket out of the housing, and once you get them out, you're going to pull the bulbs out. Disconnect them from the harness, and that's true for all the bulbs there. See, this one just pulls right out and snaps back in. The high-beam and low-beam which are the next two bulbs are behind two plastic covers. Those are the same where you have to turn them to the left, and once you do that you'll be able to access the bulb and the harness. It's probably easier if you unclip the harness first, and then twist the bulb out. It's going to go back in. It's got three prongs. They need to line up with the housing of the headlight assembly. Once you've done that, twist it, tighten it, and clip your harness back in. It's going to be the same for the next bulb. The last bulb is going to be just like the first where you twist it out and pull the bulb from the socket.
If you're looking to replace the whole headlight assembly go ahead and disconnect your connector. Here's a side-by-side of the old part that's faded and pitted, and then the new part from 1A Auto that you see has a perfectly clear lens. It's ready to be installed just as it is. To reinstall, first plug in your harness to the connector on the back of the headlight assembly. Then I found that it's easiest to line up the three tabs or recognize that there's two there that go in those slots, and that one on the back. That goes into the inner fender well. If you put the bottom in first, it's a little bit easier. You can see I'm kind of having trouble with it right there. If you slide in the bottom first it should go ahead and fit right in just like that. Go ahead and reinstall that 7mm screw. I'll fast-forward as I do that. Now go ahead and take that white long clip that you took out. Align it over that taps of the hooks that went on the back side of the headlight assembly and push down.
We hope this helps you out. Brought to you by www.1AAuto.com. You source for quality replacement parts and the best service on the internet. Please feel free to call us toll free 888-844-3393. We're the company that's here for you on the internet and in person.
LHT03430
Great lights, fits great, easy installation, looks nice. Have had mine in close to two years AB's still looks great. 4/5 stars only beard they do get condensation in a little bit.
The high beams can't be adjusted separately from the low beams. As a result the low beams are adjusted lower than the should and the high beams are shining in the trees . Their is a dark space between the the low and the high beam's when the high beam's are on , I should have purchased OEM headlights
I purchased this set . It has on adjustment for up and down it controls both high and low beams , the low beams adjusted correctly maybe a little to low . The issue the high beams shine in the trees , leaving a dark area between the high and the low beams . I should have purchased OEM headlights
Good product at a fair price!
Very good product . Shipping was impressive. And videos to install are a great help.
My daughter thought her car got a facelift! We will see long term how these lenses hold up, but only expecting to have the car one more year, so not sure I care - and st this price - I can afford to replace them if they only last a year or two?
I was pleased that the lamps came included in the headlight assemblies. I liked everything about them except the weather seal. It kept coming off and I had to glue them down before I could install them. The left headlight weather seal was torn as well, as if it had been sold and returned after trying to install.. It would be nice if they could add one of those "others who bought these also purchased" as both of my 7mm screw things were falling out of the 1/4 panel and the left headlight female connector had a wire burnt off. I would have purchased all of those items. Definitely a four star value though. Two replacement H11 lamps are $72 locally. Two H9 high beam lamps are $72 which pretty much covers the cost of the headlight assemblies. So I do recommend these for that reason alone. It's a plus to get clear headlight assemblies!
The headlights is great, no issues wat so ever. They fit wonderfully bringing back the look on my monet carlos like when I first purchase it thanks 1 A auto iam very please with them...thank again
They fit good, but the plug in is a little bit big where so had to force it. They came with yellow light bulbs. The seal was not glued to the headlight correctly, I had to adjust the seal and glue it again
So nice to have good headlights again and so affordable!
This is backed by our limited lifetime warranty. In the event anything should fail due to manufacturing defects during intended use, we will replace the part(s) free of charge. This warranty covers the cost of the part only. Please contact our customer service department at 88.844.3393
There are adjusters on the back of the headlight assemblies which should be able to move for you to change the direction of the beam.
Our parts are exact replacements for your vehicle's OEM parts. As long as your vehicle specifications match up with our listing, these parts will directly fit and function like the originals.
Hello, we have a driver-side headlight for your vehicle LHT01866.
New light bulbs are not included. Occasionally, manufacturers leave test bulbs in the lights. If you receive test bulbs, you'll want to replace them with your original bulbs or with new bulbs.
Hello, Thank you for your question. Yes, these are listed only for the 2016 Chevy Impala Limited.
1A Auto's house brand parts are manufactured by various aftermarket companies specifically for us and built to your vehicle's exact OEM specifications in different countries. Please let us know if you have any other questions.
Reuse the original clips.
The head light assembly is designed for a halogen bulb. The LED will make a head light brighter but will not project light further. The best thing is a quality halogen bulb.
This headlight assembly is COMPLETE with lens and bulbs. Takes maybe 10 min. per headlight to replace.
