★★★★★
January 14, 2026
Perfect fit,, would definitely recommend it.
Replaces
About TRQ:
TRQ is a trusted brand dedicated to making every repair a success story by combining premium parts with easy installation. Each TRQ part is engineered by a team of automotive experts to meet or exceed OEM standards, delivering enhanced performance and maximum longevity. With rigorous in-house testing, the brand ensures superior fit and function across every product line. TRQ also provides customers with best-in-class, step-by-step installation videos—so you can complete repairs with confidence, whether you're a first-time DIYer or an industry professional.
Our steering and suspension components are pre-greased and sealed for long life and do not require the extra maintenance typically required by greaseable versions.
Attention California Customers:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
This part fits 16 vehicles spanning 1997-2016.
| Year | Make | Model | Description |
|---|---|---|---|
| 1997-2005 | Buick | Century | Buick Century Front Sway Bar Kit TRQ PSA84926 |
| 1997-2004 | Buick | Regal | Buick Regal Front Sway Bar Kit TRQ PSA84926 |
| 2000-2013 | Chevrolet | Impala | Chevrolet Impala Front Sway Bar Kit TRQ PSA84926 |
| 2014-2016 | Chevrolet | Impala Limited | Chevrolet Impala Limited Front Sway Bar Kit TRQ PSA84926 |
| 2000-2007 | Chevrolet | Monte Carlo | Chevrolet Monte Carlo Front Sway Bar Kit TRQ PSA84926 |
| 1997-2001 | Chevrolet | Venture | Chevrolet Venture Front Sway Bar Kit TRQ PSA84926 |
| 2002-2004 | Chevrolet | Venture | Chevrolet Venture Front Wheel Drive Front Sway Bar Kit TRQ PSA84926 |
| 2005 | Chevrolet | Venture | Chevrolet Venture Front Sway Bar Kit TRQ PSA84926 |
| 1998-2002 | Oldsmobile | Intrigue | Olds Intrigue Front Sway Bar Kit TRQ PSA84926 |
| 1997-2001 | Oldsmobile | Silhouette | Olds Silhouette Front Sway Bar Kit TRQ PSA84926 |
| 2002-2004 | Oldsmobile | Silhouette | Olds Silhouette Front Wheel Drive Front Sway Bar Kit TRQ PSA84926 |
| 1997-2003 | Pontiac | Grand Prix | Pontiac Grand Prix Front Sway Bar Kit TRQ PSA84926 |
| 2006-2008 | Pontiac | Grand Prix | Pontiac Grand Prix without Special Ride & Handling Suspension Package Front Sway Bar Kit TRQ PSA84926 |
| 1999-2001 | Pontiac | Montana | Pontiac Montana Front Sway Bar Kit TRQ PSA84926 |
| 2002-2005 | Pontiac | Montana | Pontiac Montana Front Wheel Drive Front Sway Bar Kit TRQ PSA84926 |
| 1997-1998 | Pontiac | Trans Sport | Pontiac Trans Sport Front Sway Bar Kit TRQ PSA84926 |
| Brand Label | Part Number |
|---|---|
| Dorman - OE Solutions | 927-100 |
| DIY Solutions | SUS06619 |
| General Motors | 10257316 |
| General Motors | 10284146 |
| General Motors | 25861194 |
| General Motors | 10413385 |
| MOOG Chassis Products | K170001 |
| General Motors | 25861196 |
| General Motors | 25861195 |
| General Motors | 25861193 |
| Mevotech Supreme | MS508197 |
| General Motors | 10287944 |
| General Motors | 10257317 |
| General Motors | 10404184 |
| General Motors | 10287717 |
| Duralast | 927-100 |
| Hollander | 524-00288 |
| Mevotech | MS508197 |
This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the internet.
Hi. I'm Mike Green. I'm one of the owners of 1A Auto. I want to help you save time and money repairing and maintaining your vehicle. I'm going to use my 20 plus years experience restoring and repairing cars and trucks like this to show you the correct way to install parts from 1A Auto.com. The right parts installed correctly. That's going to save you time and money. Thank you and enjoy the video.
In this video we are going to show you have to replace the front sway bar or stabilizer bar on this Chevy Venture. The stabilizer bar does fit a whole bunch of different GM cars and minivans so the procedures are going to be basically the same as this vehicle although there may be some differences if you're doing it on an Impala or a Grand Prix. Tool you will need include a flat blade screwdriver, 19 mm socket and ratchet or your tire iron, jack and jack stands, torque wrench, penetrating oil, in. socket and ratchet, hammer and also a 15 mm socket and ratchet.
Start by removing the wheel. Use a screwdriver to pry off the center cap. The wheel lug nuts are 19 mm. If you're using hand tools you will want to have the vehicle on the ground, loosen up the lug nuts and then raise up the vehicle and secure it. Remove them the rest of the way. I'm going to use air tools. I'll fast forward through finishing this and obviously you want to take this wheel off and the other wheel off as well. You can see I've sprayed this link with lots of penetrating fluid and what I'm going to do is I'm going to jack up the suspension here. What that's going to do is release some of the pressure. You can actually see that this stabilizer bar is cracked right there. Jacking it up to relieves some of the pressure. On this vehicle these are half in. It could be different. It could be a 13 mm on your vehicle, but you want a wrench on top and something to hold it on the bottom and pull. The longer you soak it with that penetrating fluid, the easier it will come apart. The only reason I'm fast forwarding here is because obviously I'm doing everything on the passenger side, but what I'm doing off camera is once I complete one step on the passenger side I'm doing that same step on the driver's side. Just something to keep in mind as I let this down here. Now you want to spray a whole bunch of penetrating oil down on the shaft of that bolt. I've got a set of vice grips on the middle of the bushing and my wrench down at the bottom and I'm just working that bolt free of that bushing. Now I'm basically just taking a hammer and beat on it. You can see it starts going down. Then you can pull that right out. Then pull that whole assembly right out.
Right in here you've got two 15 mm bolts and if you turn your wheels all the way to the other side it's pretty easy to get in there. I've got a deep reach socket although you can get in there with a regular socket as well. They are actually not that difficult. I'm just going to use an air ratchet and speed this up a little bit. I repeated that procedure for the other side and this might give you an idea of why these need to get replaced sometimes. Part of the end just fell apart. What are going to want to do is pull off these bushings on the other side as well. I've got the other side pretty much free. I'm going to freeze it for a second here. This is the part if you have an Impala or a Grand Prix or a Regal you may need to actually drop your engine carriage down which is nothing more than the two big bolts underneath those brackets. Support it with your jack. Undo those two bolts and let the engine carriage down a few inches and that gives you more room to do this if you have a problem getting the bar out. Bend it down like that. It will pull right out. Like I said you can see on this side that's what happens to them. They are hollow so they get some moisture in there and then they end up breaking on the end.
Here's the new bar from 1AAuto and our bar is solid. It's not hollow so you won't ever have that problem again even though the car may not last another 100,000 miles. It does go in. It's got a bend in the middle and that goes up so you want to feed it in there that way. Slowly feed it in. Our bar comes with all new bushings and brackets. The bushings just have a split in them. Feed them around the bar. It's roughly in place.
What I'm going to do is just use a little bit of hand soap and just put it on the inside of this bracket here. Makes it that much easier. You don't want to use grease or anything because that could eat away into the bushings. The hand soap is nice and mild. It just allows the bracket to go down on there quite a bit easier. I'll repeat that on the other side.
Now to put your end link in you want to undo it here. You've got the washer in that bushing and then take out this whole assembly here which is two bushings and a spacer. Carefully put that right in between the stabilizer bar and your control arm. Then you've got your link with the bushing on the bottom, push that up through. Finish it off with your bushing on top. Then start your nut on top here. Then you want to put the other side together the same way.
For the bushing I'm just going to use my original bolts because they are flattened here which makes them easier to start. It does come with new bolts, but since they don't have this shoulder on them they are a little more difficult to use. If you break your bolts obviously you can use these. I prefer using the original ones.
You have to keep the wheel straight or else the bar interferes with the steering until you get it somewhat bolted down. You can see I've got my bracket on here. I've got one side down and I'll try to start this rear bolt. I've got both those started. I'm going to go do the same thing to the other side. That's what this is. You do one thing on one side and you do the same thing on the other side until you start getting it going.
Now what we want to do is tighten up our length just preliminarily. You don't want to tighten it up all the way. You don't want to tighten anything up until you have the weight back on the front suspension. What I'm going to do is- I'll just tighten up the other side a little bit. I have the brackets on both sides and the links started. What I've done, see I've got it on my wheels with a piece of wood. Then over here I have it on my jack so all the weight is on the front suspension which it should be. You can see the vehicle is off the lift. Basically the procedure now is I'm going to tighten up my bracket bolts not all the way tight, but just so the bracket is about in away from the frame.
Then once I tighten those bracket bolts then I'm going to tighten up my links all the way. Then I will finish by tightening up the bracket bolts. Now I am tightening up the bracket bolts and again not tightening them up all the way yet. Actually what I'm doing there is I'm kind of pressing down on the bolt with the socket which helps start it. I found that one of them wasn't quite started yet, but I'm tightening those up. Now off camera I tightened up the other side and I tightened up the link so now I'm tightening up the link on my passenger side all the way. Basically you tighten until you can't tighten anymore. You don't have to be extremely tight. Then once you're done with the link then you tighten up the frame bushing bolts all the way. Then you can jack up the vehicle and remove the jack stands or actually jack up the vehicle some, remove the blocks from under the wheels, put your tires back on, remove the jack stands and put the thing back on the ground and you're all set. Here I am putting the wheel back on. I'll put the lug nuts on with my fingers. Then I'll use the air wrench to just tighten them up a little bit. Then with the wheel on the ground I will tighten them up to 100 foot pounds with the torque wrench. I'll use a star pattern crisscrossing.
We hope this helps you out. Brought to you buy www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll free 888-844-3393. We're the company that's here for you on the Internet and in person.
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks.
In this video, we're going to show you how to replace the front sway bar on this 2003 Chevy Monte Carlo. It's the same part and similar process on these Monte Carlos from 2000 to 2007. The items you'll need include a new front sway bar from 1AAuto.com, 13mm, 14mm, 18mm and 19mm sockets, a ratchet, 14mm and 15mm wrenches, a hammer, and jack and jack stands.
Remove the tire by just loosening up these lug nut caps. Now, you can remove your lug nuts. If you don't have air powered tools, you want to loosen these up while the vehicle is on the ground. Then raise the vehicle and remove the nuts the rest of the way. If you do have air-powered tools, you can just remove them right here.
Spray down the top of the link with some penetrating oil and then use a 14mm wrench to hold the top with a 14mm socket and ratchet on the bottom. Ours actually comes apart easily. It's not uncommon. Sometimes the link is totally broken, and you don't even have to do this step. You just pull the remains out. And also, sometimes they're frozen up so bad you have to use a saw or a torch to cut the links out.
Pull the top bushings off and push the sway bar link down and out. Then remove the bushings in the center. Use a 15mm wrench and loosen these two bolts on your sway bar mount. You can see we're using an extra wrench to help break it free. We do the same thing here, but you'll notice this one is a little hard to remove right now. We fix that, and you want to just remove the sway bar link from this side. You can see on this side that our sway bar is actually broken. Now, you want to just lift the sway bar up and now that that's out of the way, you can remove these two 15mm bolts the rest of the way. We'll fast-forward as Mike does that.
Place a jack on this crossbar and then remove these two 18mm bolts. We'll just fast-forward as Mike does that. Now, carefully lower the jack slowly, and then hammer off these mounts. Once you get the metal off, you just pull this rubber part off. Do the same thing on this side. If it still doesn't fit, you can lower it down a bit more and then just pull the bar down.
Up top is the old sway bar; below is the new one from 1A Auto. You can see they're identical, and will fit exactly the same. The new one also comes with two new mounts and two new sway bar links.
Feed your new sway bar link up into place. Angle it forward and clip it on to the sway bar over there if you didn't entirely remove it. If you did, you want to just put the sway bar bolt up through. Put the bushings on. Push the sway bar down into place, and then put that top bushing and the nut back on top. You don't need to tighten this; you're just using this to hold it into place.
Have that set up on both sides, and then push the mount on to the bar. Then push the metal bracket down over that. Then replace those two 15mm bolts, and then repeat the process on the other side. Now, raise the jack back up. Once you have it in position, replace those two 18mm bolts and tighten them up.
When you tighten up the sway bar, you want to simulate all the weight being on the suspension. You want to have the sway bar in the riding position. Put jack stands underneath the control arms and carefully put the weight down on the jack stands and then tighten up all the mounts on the sway bar. Then replace your wheel and each of the lug nuts. You want to just tighten them preliminary, lower the vehicle, and tighten them the rest of the way.
We hope this video helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
PSA84926
Perfect fit,, would definitely recommend it.
Sway bar arrived quickly with all accessories for the install. I watched the installation video that accompanied the shipping conformation email. The install went without a hitch. Every part that I order from 1A Auto always fits perfectly and the install videos are priceless. Because of this I only order from 1A Auto if they carry the parts I need. If the parts are not available I seek another vendor and pray that the parts fit.
Replaces old broken sway bar
This product just like all the others I have purchased through 1A over the years was just what I needed. Great quality, great shipping times and great customer service.
great part was able to return it as mine was good
Perfect fit
Thank goodness for your fast shipping. Got me back on the road in only a few days!!
1AAuto saved me money and stress
Awesome
Fit my car perfectly! Took two of us about an hour to replace the broken one. Did NOT have to lower the sub frame. Draw it out on the passenger side to avoid fuel line on drivers side. Insert from passenger side also. My Monte handles great now!
Thank you for your inquiry, Gabby! Yes the entire sway bar in included with this kit.
This will come with the sway bars assembled as shown and will include all of the pieces in the photo.
The front sub fram bolts take them out but put a jack under it first and let it down with the jack just around a inch maybe just enough to let you slide it in then jack back up put bolts back in before going on just for safety. Hope this helps.
