★★★★★
October 14, 2024
Worked great, and easy to install. Took 20 minutes if that.
Replaces
Replaces Engine Oil Filter
$50.98
OBD2 Diagnostic Scan Tool
$59.95
Part Details
Specifications
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Returns: Parts with electrical components cannot be returned once installed.
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
Returns: Parts with electrical components cannot be returned once installed.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
In this video, we're going to show you how to replace an ignition coil on this 2003 Buick LeSabre. These coils are the same for many different GM vehicles, so this will cross over to different cars, although some vehicles locate the coils in different places. The only tool you'll need is a 7/32 inch socket with a ratchet and extension.
The ignition coils for this vehicle are nicely located right here on the front the engine. There's actually nothing wrong with them. I'm just going to show you how to take them in and out. Each coil does 2 cylinders. Just give the wires a twist. I'll put that one right up there; this one down here so I know which one goes where. Do these one at a time. These bolts are 7/32 inch and you just remove 2 bolts. The coil lifts right up and off. There are two contacts right here that go into the coil and then put your new one on. Carefully place it on those contacts. Make sure you don't bend them. Put your 7/32 inch bolts back in. Then plug back in your wires. The wires have to go back on the same ones, so it's important you do them one at a time and unplug the wires two at a time.
We hope this helps you out. Brought to you by www.1AAuto.com, your source for quality replacement parts and the best service on the Internet. Please feel free to call us toll-free, 888-844-3393. We're the company that's here for you on the Internet and in person.
IGN00484
Worked great, and easy to install. Took 20 minutes if that.
worked good
I ordered this because my ignition control module went bad, and I figured I am still running the original coils, so when a coil goes bad I will have replacements on hand. Here is how I troubleshot it: I was getting a misfire on multiple cylinders, my generic scanner could not tell me which cylinders. I removed the spark plug wires, one at a time to the middle coil pack, no spark. Checked the other packs with the same method of removing the wires and they had spark. Then I switched positions of the coil packs, middle pack to the bottom position, and bottom to middle, the middle positioned pack still had no spark leading me to believe all packs were good, and the module was bad. I also went and bought some Ox-gard anti oxidant compound from Ace, and used that to help increase the thermal and electrical conductivity between surfaces of the module and piece it was mounted to, not di-electric grease.
All the parts were exactly what I ordered, perfect fit and all appeared to be good quality. Plug wires, coils, ignition control module.
Worked well.
Great product, easy application and dependable results. Always satisfied with 1AAuto products.
I sent it back it costs to much keep that year car on the road. Bought a 2010 Honda civic. I got my parts quickly but changed my mind about fixing the buick. THANKS
My Buick, Runs better than ever now to have the engine to turn over is music too my ears. Thanks 1a auto parts ??????
Been on my car for two years No problem yet
Quick service ... Right parts that fixed the problem.
1A Auto's house brand parts are manufactured by various aftermarket companies specifically for us and built to your vehicle's exact OEM specifications. Please let us know if you have any other questions.
