1992 Olds 98 Front Driver & Passenger Side Lower 2 Piece Control Arm Set TRQ PSA62834

Fits good. If you are doing a 1996 park ave, the control are fits into the rear bracket, but sits on the outside of the front bracket. You will need to press the bushings out of that bracket with a threaded rod, some nuts and large sockets. Then buy a set of control arm bushings. The larger bushing goes into the front bracket. I couldnt find a set of two large bushings, so had to buy the set that came with one of each for both sides of the car in order to get two large ones. One of the control arm bolts was very seized in the rubber bushing, so I had to use a pipe on the end of a wrench and push on it back and forth for a while before it broke loose.