Replaces
Part Details
Product Features
Complete Repair in One Purchase - Stop searching for parts individually and complete your repair with a customized kit or set from DIY Solutions.
High-Quality Parts from Trusted Brands - DIY Solutions' kits and sets are selected from the best automotive brands and include hard-to-find and even obsolete parts you may need for your vehicle.
Guaranteed Fit - DIY Solutions ensures its selected parts are quality-tested to guarantee fit and function.
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Item Condition:
New
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Hi, I’m Mike from 1A Auto. We’ve been selling auto parts for over 30 years!
Open the tail gate. To remove the tail lamp assembly, there's a T30 Torx bolt here and a T30 Torx bolt here. Using a torn bit and a ratchet, remove them. Let's pull it straight out. Pulling it off of these two pins here. To remove the tail lamp assembly. Push the harness out of this connector here. Just unplug these connectors, pushing in the locks to unlock them. Do the same for all three. Take the assembly off.
Here's the original tail light assembly pulled from our vehicle. Here's our brand new one from 1aauto.com. It is an exact match from the original. It will fit great and work great in your vehicle.
Reinstall it. Plug all our harnesses back on. They'll click when they lock into place. Push this back in. And these two tabs is going to go on the lower part. One will go on the upper one. Get them lined up. Push them in. Reinstall our bolts. Tighten them up. This procedure will be identical for the other side. It gets tight. Just stop.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
