Replaces
Part Details
Specifications
Genuine original equipment part (OEM) that was factory installed on your vehicle by the manufacturer.
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
This part fits 1 vehicle spanning 2014-2020.
| Year | Make | Model | Description |
|---|---|---|---|
| 2014-2020 | Toyota | Tundra | Toyota Tundra Driver & Passenger Side 2 Piece Tail Light Set Toyota OEM TYLTP00008 |
| Brand Label | Part Number |
|---|---|
| DIY Solutions | LHT08617 |
| DIY Solutions | LHT08602 |
| DIY Solutions | LHT08603 |
| Toyota | 81550-0C101 |
| Toyota | 81560-0C101 |
This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.
1 Year Warranty
This item is backed by our 1-year warranty. In the event this item should fail during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
Created on:
Tools used
Hi, I’m Mike from 1A Auto. We’ve been selling auto parts for over 30 years!
Open the tail gate. To remove the tail lamp assembly, there's a T30 Torx bolt here and a T30 Torx bolt here. Using a torn bit and a ratchet, remove them. Let's pull it straight out. Pulling it off of these two pins here. To remove the tail lamp assembly. Push the harness out of this connector here. Just unplug these connectors, pushing in the locks to unlock them. Do the same for all three. Take the assembly off.
Here's the original tail light assembly pulled from our vehicle. Here's our brand new one from 1aauto.com. It is an exact match from the original. It will fit great and work great in your vehicle.
Reinstall it. Plug all our harnesses back on. They'll click when they lock into place. Push this back in. And these two tabs is going to go on the lower part. One will go on the upper one. Get them lined up. Push them in. Reinstall our bolts. Tighten them up. This procedure will be identical for the other side. It gets tight. Just stop.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
