WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
These headlamp housing look great. They installed properly. My issue is the description doesn't say the exact bulbs these use, only that it's stock. When I reached out to the to answer this question that's all they told me was stock, couldn't tell me exactly what bulb sizes. Well, they are not stock bulb sizes, at least not for a 2016 Ram 1500 with stock projector headlamps. Maybe for the non-projector headlamps. I could not reuse the LED bulbs from my stock headlamp housing in these new units. So, I ended up ordering new LED bulbs. Then, in one of the new headlamps I could not get the high-beam bulb out of the lock socket. Whomever installed the bulb must have had the bulb in the lock socket before they screwed the lock socket ring to the lense, AND THEN glued the headlamp rear housing to the lense. This because the bulb 3-prong key was in incorrect orientation and I could not remove it. So I had to unscrew the lock socket ring from the lense. BUT one of the 2 screws that hold this in was under the rear housing. Fortunatly I have some small screwdrivers with tight 90 degree bends, so that's what I had to use. I would not have ordered these headlamps from 1AAuto had I known. It's not like they had a better price than similar looking housings from other vendors. Also, tried to "Add photos" but no matter the format or size it gave me an error every time.
