Replaces
Part Details
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the internet. Hi, I'm Don from 1A Auto, I hope this how-to video helps you out, and the next time you need a part for your vehicle, think of 1AAuto.com. Thanks.
In this video we're going to show you how to service the bulbs as well as replace the entire taillight assembly on this 2014 GMC Terrain, and the only tools that you're going to need for this is a flat blade screwdriver and a 10mm socket and ratchet. Start off by prying off these plastic caps with your flat blade screwdriver, and now remove the two 10mm bolts behind those caps.
Once those are removed, use either a pry tool or a flat blade screwdriver and just pry out the backside of the taillight and then it'll pull right off. Push the tab and disconnect the harness, and then to replace your bulb, you twist the socket, pull it out. The bulb pulls right out. Push your new one into place and twist the socket back into place. Reconnect your harness, and line up these two tabs, and push your new taillight back into place. Now replace those two 10mm bolts and those two plastic caps and you're all set.
We hope this video helps you out. Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the internet. Please feel free to call us toll free: 888-844-3393. We're the company that's here for you on the internet and in person.
