Replaces
About TRQ:
TRQ is a trusted brand dedicated to making every repair a success story by combining premium parts with easy installation. Each TRQ part is engineered by a team of automotive experts to meet or exceed OEM standards, delivering enhanced performance and maximum longevity. With rigorous in-house testing, the brand ensures superior fit and function across every product line. TRQ also provides customers with best-in-class, step-by-step installation videos—so you can complete repairs with confidence, whether you're a first-time DIYer or an industry professional.
Our control arms are designed to be direct replacements for the original factory parts. They are 100% brand new and require no modifications for installation. No special tools are required because all of the bushings come pre-installed.
Our steering and suspension components are pre-greased and sealed for long life and do not require the extra maintenance typically required by greaseable versions.
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
This part fits 1 vehicle spanning 2009-2015.
| Year | Make | Model | Description |
|---|---|---|---|
| 2009-2015 | Honda | Pilot | Honda Pilot Front Driver & Passenger Side Lower 2 Piece Control Arm with Ball Joint Set TRQ PSA62309 |
| Brand Label | Part Number |
|---|---|
| ACDelco | 45D10113 |
| Dorman | 521-898 |
| Dorman | 521-897 |
| ACDelco | 45D2260 |
| Mevotech | GS601043 |
| Dorman - OE Solutions | 521-898 |
| Honda | 51360SZAA04 |
| MOOG Chassis Products | RK621551 |
| Mcquay-Norris | FA3947 |
| Mevotech | CMS601044 |
| MAS Industries | CB59203PR |
| NAPA | 2606883 |
| MAS Industries | CB59203 |
| Beck/Arnley | 102-7546 |
| Honda | 51360SZAA02 |
| Mevotech | CMS601043 |
| MOOG Chassis Products | RK621550 |
| SYD | 1509053 |
| Mevotech | MS601044 |
| Dorman - OE Solutions | 521-897 |
| NAPA | 2606884 |
| Honda | 51350SZAA02 |
| Honda | 51350SZAA04 |
| Mcquay-Norris | FA3946 |
| Precision Driveline | 5CB60269 |
| Mevotech | MS601043 |
| Honda | 51360SZAA03 |
| Beck/Arnley | 102-7545 |
| Honda | 51350SZAA03 |
| MAS Industries | CB59204 |
| NAPA Premium | 2606883 |
| DIY Solutions | SUS01107 |
| DIY Solutions | SUS05683 |
| DIY Solutions | SUS05684 |
| Carquest | CA1940B |
| Honda | 51360-SZA-A02 |
| Honda | 51350-SZA-A02 |
| Dorman - Premium | CB59203PR |
| Hollander | 512-50448L |
| Hollander | 512-50447R |
| Mevotech Supreme | MS601044 |
| Mevotech Supreme | CMS601043 |
| Mevotech Supreme | MS601043 |
| Mevotech Supreme | CMS601044 |
| Mevotech Supreme | GS601043 |
This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
Overall good. One arm looked like it might have already been unpackaged and repackaged. two different cotter pins for the castle nut. Weird. Installation on the passenger side was challenging due to an adjoining bracket for the sway bar. Patience and 1/4" ratchet and socket will server you well. So far so good!
fits just like original - did have to really loosen it to get it to slide in place
the project went very well. I had a bad pushing. I do not work on cars for a living and I got both sides done in 3 hours. In addition, I took my car back into the alignment shop for a re-alignment and they told me the car was not out of alignment. that was an added plus but probably just luck. I hope these last longer than 2 years like but I won't get my hopes too high based on other reviews.
All parts were correct and it installed great!!!
Product looked exactly like the picture. Mechanic agreed that it was a quality part prior to installing. No issues since install.
now it's good now no issue with ball joint
good so far lets see if it last a year or 2
Parts arrived on time. Parts fit well. I will purchase from 1A Auto in the future.
So far so good. Replacing this part definitely got rid of the clicking/popping sound I was hearing in the front end. They seem to be well made for sure and comparable to OEM at a much better price. Hoping they hold up and aren't just for esthetics. Just a tip: may want to replace the sway bar bushings while you're down there and everything is opened up. If they are too open they can contribute to noise and can be annoying to remove\replace. I got THQ parts all over my Honda now with no apparent issues. Thank you 1AA!
Quality product. I liked the fact that the compliance bushing was installed and torqued to the proper value. Installation tips: Protect the ball joint boot with a thick piece of cloth (push the stud through a small hole in the cloth) and some tape while installing. Turn the wheel hard over to the right when doing the drivers side (and vice versa). This will give you more wiggle room to get the new part in. Its tight but no need to disconnect the CV axle from the knuckle. You may need to tap the compliance bushing into the frame with a hammer and piece of wood to get it started.
PSA62309
These are manufactured by TRQ. TRQ is a high quality, high-end name brand that we offer and back with our 1A Auto Limited Lifetime Warranty.
Yes, these bushings will be preloaded.
Not exactly. There is a video of it on the 1AAuto site that walks through the process. I decided it was too challenging so I took it to the dealership and let them do it.
