About TRQ: TRQ is a trusted brand dedicated to making every repair a success story by combining premium parts with easy installation. Each TRQ part is engineered by a team of automotive experts to meet or exceed OEM standards, delivering enhanced performance and maximum longevity. With rigorous in-house testing, the brand ensures superior fit and function across every product line. TRQ also provides customers with best-in-class, step-by-step installation videos—so you can complete repairs with confidence, whether you're a first-time DIYer or an industry professional.
Product Features
Direct Fit - No vehicle or wiring modification necessary
DOT, SAE, and FMVSS Compliant - Meets on-road use regulations
Matching set for a restored look
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
This part fits
1 vehicle spanning 2009-2014.
Fits these Makes
Select vehicle
Year
Make
Model
Description
2009-2014
Nissan
Murano
Nissan Murano with Halogen Headlights Driver & Passenger Side 2 Piece Headlight Set TRQ HLA88576
Part Interchange
Brand Label
Part Number
Nissan
260101AA0D
Partslink Numbering System
NI2502185
Nissan
260601AA0D
Nissan
260601AA0A
Nissan
260101AA0A
TYC
20-9006-00-9
Nissan
26060-1AA0A
Eagle Eye Lights
DS675-B101R
TYC
20-9005-00-9
Hollander
114-50812R
DIY Solutions
LHT02147
Nissan
26010-1AA0A
Partslink Numbering System
NI2503185
Eagle Eye Lights
DS675-B101L
DIY Solutions
LHT02148
Hollander
114-50813L
This item may be interchangeable with parts from other brands with the above part numbers.
This information is provided only for reference and does not guarantee that the item you are
purchasing is identical to parts with part numbers from the brands listed above.
To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii and Alaska.
Shipping is not available to a P.O. Box, APO/FPO/DPO addresses, US Territories, or Canada for this item.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii.
Final shipping costs are available at checkout.
How to Replace Headlight Assemblies 2009-14 Nissan Murano
Created on:
Tools used
Socket Extensions
Flat Blade Screwdriver
T20 Driver
Jack Stands
10mm Socket
Ratchet
Floor Jack
Needle nose pliers
Trim Tool Set
Pick
1. Removing the Bumper Cover
Remove the 14 clips from the plastic covers over the grille with a trim tool
Loosen the clips with a screwdriver and pry them up from the metal shield
Raise and secure the vehicle with a jack and jack stands
Remove the clips from the splash shield underneath with a trim tool
Remove the T20 Torx screws from the shield beneath the bumper
Remove the two 10mm bolts holding the bumper cover to the radiator support
Pry back the wheel well shield
Remove the 10mm bolt from either side of the bumper cover
Pop the bumper cover out and off
Press the pin and remove the lock tabs underneath the grille
Press the tabs on the grille with a flat blade screwdriver to loosen it
Pry the grille side tabs free with needle nose pliers
Lift the grille up and press the clips to remove it
Remove the push-pin tabs from either side of the bumper cover
Pull the bumper cover out
2. Removing the Headlight
Remove the four 10mm bolts from the headlight
Pull the headlight assembly forward
Pry the harness out from beneath the light
Disconnect the electrical connectors from the headlight
3. Installing the Headlight
Connect the wiring harnesses to the headlight
Line the headlight up and slide it into place
Tighten the four 10mm bolts to the headlight
4. Installing the Bumper Cover
Lift the bumper cover up into place
Press the bumper into place
Tighten the 10mm bolt on either end of the bumper
Press in the three push-pins where the bumper meets the metal bracket
Place the plastic pieces and their lock tabs to the bumper
Put the grille into place, clipping in the edge on either side
Press the push pins to the grille
Place on the plastic shield over the grille
Press the push-pins to the shield
Peel back the fender well liner and tighten the 10mm screw to either side of the bumper
Press the splash shield into place
Press the push-pins to the splash shield
Product Reviews
5.0/ 5
★★★★★★★★★★
2 reviews
5★
100%
4★
0%
3★
0%
2★
0%
1★
0%
★★★★★November 28, 2025
Everything was perfect. Easy to remove and install new headlamps. I will be ordering again from you.
★★★★★November 9, 2024
ThankyouThank you good costumes service
Showing 1–2 of 2 reviews
HLA88576
In Stock
Customer Q&A
Got a question about this part? Post it and get answers from our team.
No questions have been answered for this product yet.
Customer service
877-844-3393
Monday - Friday 8:00am - 9:30pm ET Saturday - Sunday 8:00am - 4:30pm ET
Ask a Question
Check Your Email
We sent a verification email to .
Click the Verify Email button in the email to submit your question.
This extra step helps prevent spam.
Select Your Vehicle
Specify your vehicle's year, make and model to guarantee fit.