Quick shipping. Perfect fit. Easy installation. So far everything is good after 2000 miles
Replaces
Quick shipping. Perfect fit. Easy installation. So far everything is good after 2000 miles
Worked great. Fit well. The mid joint is on the back side of the mid bearing, but worked well. Price was also good.
The clunking has stopped.
Great quality
Fit perfectly, no issues with install
Perfect replacement part. Took care of the vibration we had.
My original was a 3 piece driveshaft, this one is a two piece driveshaft, but bolted up perfectly and operates nice and smooth.
Part matched and very satisfied. Part was as advertised
Ordered rear driveshaft and received in timely manner,was good quality and description was accurate. I will shop again and recommend to others!
Yes. I used this two piece to replace the original 3 piece. It bolted right in place.
Yes, Just make sure to put the carrier bearing support bushings back exactly as the factory had them. Otherwise there will be vibration from the shaft. New bolts and carrier bushings are recommended.
This product is an updated design. While this part may look different from the one originally installed on your vehicle, it is guaranteed to fit and operate as well or better.
The design has been revised from 3 pieces on the OEM to 2 pieces on the 1AA. I encountered this during my install on an MKX. The 1AA fits in place of the old 3 piece. I would reccomend new isolation hardware as well.
Yes, fully assembled and ready to install.
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
We don't currently have an installation video or instructions available for this part. We're constantly adding new installation videos and instructions though, so please check again at a later time or check our Video Library to see similar repairs here: <a href="https://www.1aauto.com/videos" target="_blank">https://www.1aauto.com/videos</a> I apologize we do not carry the center bearing.