★★★★★
April 18, 2026
Awesome Service
awesome Service,
Replaces
Part Details
Specifications
About TRQ:
TRQ is a trusted brand dedicated to making every repair a success story by combining premium parts with easy installation. Each TRQ part is engineered by a team of automotive experts to meet or exceed OEM standards, delivering enhanced performance and maximum longevity. With rigorous in-house testing, the brand ensures superior fit and function across every product line. TRQ also provides customers with best-in-class, step-by-step installation videos—so you can complete repairs with confidence, whether you're a first-time DIYer or an industry professional.
Handle is the original color shade.
Pro Tip: Replace Handles in pairs or sets. Fading from the sun or age can make your Vehicle Handles and Bezels appear a hue difference next to new Handles.
Attention California Customers:
WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
This part fits 13 vehicles spanning 2007-2013.
| Year | Make | Model | Description |
|---|---|---|---|
| 2007-2013 | Chevrolet | Avalanche | Chevrolet Avalanche Driver & Passenger Side with Heated Seats with Memory Seat Option 2 Piece Interior Door Handle Set TRQ DHA33336 |
| 2007-2013 | Chevrolet | Silverado 1500 | Chevrolet Silverado 1500 Driver & Passenger Side with Heated Seats with Memory Seat Option 2 Piece Interior Door Handle Set TRQ DHA33336 |
| 2007-2013 | Chevrolet | Silverado 2500 HD | Chevrolet Silverado 2500 HD Driver & Passenger Side with Heated Seats with Memory Seat Option 2 Piece Interior Door Handle Set TRQ DHA33336 |
| 2007-2013 | Chevrolet | Silverado 3500 HD | Chevrolet Silverado 3500 HD Driver & Passenger Side with Heated Seats with Memory Seat Option 2 Piece Interior Door Handle Set TRQ DHA33336 |
| 2007-2013 | Chevrolet | Suburban 1500 | Chevrolet Suburban 1500 Driver & Passenger Side with Heated Seats with Memory Seat Option 2 Piece Interior Door Handle Set TRQ DHA33336 |
| 2007-2013 | Chevrolet | Suburban 2500 | Chevrolet Suburban 2500 Driver & Passenger Side with Heated Seats with Memory Seat Option 2 Piece Interior Door Handle Set TRQ DHA33336 |
| 2007-2013 | Chevrolet | Tahoe | Chevrolet Tahoe Driver & Passenger Side with Heated Seats with Memory Seat Option 2 Piece Interior Door Handle Set TRQ DHA33336 |
| 2007-2013 | GMC | Sierra 1500 | GMC Sierra 1500 Driver & Passenger Side with Heated Seats with Memory Seat Option 2 Piece Interior Door Handle Set TRQ DHA33336 |
| 2007-2013 | GMC | Sierra 2500 HD | GMC Sierra 2500 HD Driver & Passenger Side with Heated Seats with Memory Seat Option 2 Piece Interior Door Handle Set TRQ DHA33336 |
| 2007-2013 | GMC | Sierra 3500 HD | GMC Sierra 3500 HD Driver & Passenger Side with Heated Seats with Memory Seat Option 2 Piece Interior Door Handle Set TRQ DHA33336 |
| 2007-2013 | GMC | Yukon | GMC Yukon Driver & Passenger Side with Heated Seats with Memory Seat Option 2 Piece Interior Door Handle Set TRQ DHA33336 |
| 2007-2013 | GMC | Yukon XL 1500 | GMC Yukon XL 1500 Driver & Passenger Side with Heated Seats with Memory Seat Option 2 Piece Interior Door Handle Set TRQ DHA33336 |
| 2007-2013 | GMC | Yukon XL 2500 | GMC Yukon XL 2500 Driver & Passenger Side with Heated Seats with Memory Seat Option 2 Piece Interior Door Handle Set TRQ DHA33336 |
| Brand Label | Part Number |
|---|---|
| DIY Solutions | BHS03330 |
| DIY Solutions | BHS01692 |
| DIY Solutions | BHS01990 |
| Dorman | 80386 |
| Dorman | 81188 |
| Dorman - HELP | 81188 |
| General Motors | 15935954 |
| General Motors | 15935951 |
| Dorman - HELP | 80386 |
| Chevrolet | 15935951 |
| Chevrolet | 15847311 |
This item may be interchangeable with parts from other brands with the above part numbers. This information is provided only for reference and does not guarantee that the item you are purchasing is identical to parts with part numbers from the brands listed above. To confirm that this item fits your vehicle, use the above "Check Vehicle Fit" option.
Lifetime Warranty
This item is backed by our limited lifetime warranty. In the event that this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com, your source for quality replacement parts and the best service on the Internet.
Hi, I'm Mike from 1A Auto. I hope this how-to video helps you out, and next time you need parts for your vehicle, think of 1AAuto.com. Thanks!
In this video, we're going to show you how to replace the rear outside door handles on this 2007 Denali. It's the same process for any 2007 to 2013 Yukon Denali, as well as the SLT, and Tahoe LTZ. It's also probably the same procedure or a similar procedure for rear doors on the Yukon XL, Suburban, as well as the four-door Sierra and Silverados with the LTZ Denali or SLT trims.
Items you'll need include handles from 1AAuto.com, small and regular flat blade screwdrivers, 10mm socket with ratchet and extension, and a door panel clip tool or putty knife.
Disconnect the battery. You want to open up the driver's door, pull the hood release lever, hit the safety hatch, move it to the right, and then lift the hood up, and the battery is near the rear of the engine compartment on the passenger side. There's a 10mm nut on top of the negative battery cable. Loosen that 10mm nut and pull the battery cable up and off, and then put it to the side so it won't contact the terminal again.
Open up either rear door. The procedure is the same for both. You need a small flat blade screwdriver, and you'll pry out that square clip, pry out this panel under here, and I am just using one hand, so it does drop to the ground, one hand holding the camera, one hand working the screwdriver. Then there is also a little panel underneath here that you pry out. Once you have that panel out, it'll expose a 10mm bolt there, and then there's another 10mm bolt to remove down here.
Use a small screwdriver and pull up on the walk knob and pry that clip out, and it comes up and off. I'll fast-forward here as I remove those two 10mm bolts. Use a plastic trim tool or a rag and a flat blade screwdriver, and pry up on the switch panel. You kind of pry up in the center and then you pull it up and it locks. The clips are on the front and the rear. Once you get the center up, you just kind of work it into the front, and then work it into the rear. It comes up and off and then the harness just has a tab on it. You press the tab and unplug it.
Use a rag to protect your paint and a door panel clip tool, or you could use a putty knife, but you work either the tool or the knife in underneath the clip. You'll basically feel that you slide it through and you can feel the plastic clips, and then you pull out and release the clips, and I usually do this for two or three of the clips on the back side. Then you can work your hand underneath and release the rest of the clips.
Once the clips are released, you pull the panel up and off of the window ledge clip. If your door panel has never been off before, the water shield, the white water shield you can see is a black clip holding it to the door panel. There's probably three or four of these little black clips. You can see how you try to use the clip tool or a screwdriver to pry the clip out. Eventually, I just end up grabbing ahold of the clip and the water shield at the same time and pull them out. Again, you'll have to do this probably three or four times if your door panel has never been off before.
We'll need to undo the door handle cable clip. There's two little clips that hold the cable in. I'm just prying with a small screwdriver to release those clips. Here's a better shot of them as they come out. You pull it out and up out of the handle, and then the door panel comes right off.
There are three 7mm bolts to remove on the backside of the handle. Two of them hold the handle to the door panel. One of them holds the switch to the handle. We'll speed up here as I just remove those three 7mm bolts.
With the bolts out, you can press lightly on the back and you'll release a bottom clip. Then there's a couple clips at the top. Use a flat blade screwdriver. Just pry lightly between the handle and the top of the door panel and push out at the same time to release the door handle. Then pull the door handle out.
We already removed the 7mm bolt that holds the switch into the handle. If not, remove that, then the switch pulls right out.
New handle, put the switch back into place and then put that 7mm bolt that holds it, goes at the top of the switch on the backside, then tighten that up. Be careful not to over-tighten. You want to get it nice and firm, but you don't want to over-tighten it and strip the plastic threads.
The handle goes back into the door. Feed the harness through. Then it snaps into place. Then put the two 7mm bolts that hold it and tighten them up. Again, just tighten them firm. Don't over-tighten.
To reinstall the door panel, get it close, put the ball of the cable into the door handle, then pull the cable around and clip it in. Move the panel close to the door, make sure that the harness comes up through, and then make sure that the door lock goes up through the hole there, and then you kind of lift the panel up and push the top on and set it down into that window ledge clip, and then you can kind of look in behind, make sure that the clips line up. Once you have everything lined up, then you can reset the clips.
Make sure that you pull the lock knob up and then put the lock trim on there. Set that, make sure you leave it unlocked, and then reinstall the two 10mm bolts that hold the panel in place. I'll fast forward as I do that. When you tighten these, tighten them up firm, you don't want to tighten them, though, and make sure you have the harness pulled up through, put the two trim pieces in place. The upper one, you want to put the rear end first and then snap the front end. It snaps in at the front first on me, so I have to pull it back out, and then put it in correctly. Again, the back towards the back goes in first, and then front snaps in, and then reconnect the harness and snap the switch panel down in place, and then do a little test.
Then reconnect your battery, then you should be all good to go. Put the negative battery cable back on the post and 10mm socket, ratchet, and extension, then tighten it up.
Thanks for tuning in. We hope this video helped you out. Next time you need parts for your car, please visit 1AAuto.com. Also check out our other helpful how-to and diagnosis videos.
Tools used
Hi, I'm Mike from 1A Auto. We've been selling auto parts for over 30 years. We're dedicated to delivering quality auto parts, expert customer service, fast and free shipping, all backed by our 100% satisfaction guarantee. Visit us at 1AAuto.com, your trusted source for quality auto parts.
We're going to actually hit our dome lamp override, which just turns off the dome lamp. Then we're going to start up here at the corner. You can use a plastic trim tool, but I can just get my fingers behind here, pull straight out and off. You want to avoid pulling it this way, because as you can see this broke off in there. It still has two clips left though, so it'll secure fine. Then we're going to remove three other trim panels. And behind the door handle, put a small screwdriver in here, pry the bottom out and bring that out. You can see a 10mm bolt there. Then behind the door pull, use a small screwdriver to pull that out. Two more 10mm bolts are in there. Then your door lock, you want to kind of pull up a little bit and pry with a small flat blade screwdriver. That comes up and off. Make sure you retrieve that little piece if it flies out. If this comes out, just retrieve it and don't put it all the way in. Just put it like that. Additionally, you need to pull up your trim panel, plastic trim tool available on 1AAuto.com and put it in the back and pull up.
Okay, and then work it in at the front as well. You can see there's two clips at the front and rear. If you don't have a trim tool, but you have strong fingernails, you can get it out, and then just pull straight up on front as well. Then there's four harnesses to disconnect and you might have more. If you have more options, just press the tabs and pull out. Use a 10mm socket with ratchet and extension, and remove those three 10 mm bolts. These ones may stay in there after you get them loosened up. And in that case, they'll just fall down, and you can retrieve them after you take the door panel off.
Now, there's a series of clips around the edge. I usually start at the top, pull straight out, and just work your hand down. Pull firmly. Then the bottom and the side, and then door panel can come up and off. And then you'll want to disconnect your door handle, which is a matter of pressing on the tabs. There's two tabs, so press one, pull through, rotate around. Press on the other one. That allows you to move that back, bring it up and around, and your door panel comes off.
Alright, so we're going to replace this inside door handle assembly. So, we have the door panel off. We're on the bench. We have to flip it over. And we remove these six millimeter bolts. Okay, with those removed, we're just going to push it out and put a couple clip tabs here. And, those screws that are also holding this in double hold this switches in.
Alright, so I put the handle back in. I put our switches back on. Put the wiring harness up. There's a locating pin here. It goes back here. Push that up. They'll snap into place. Use six millimeter hex head screws. Just till you feel them get tight, 'cause they're just going into plastic.
First, you want to just make sure that your bolts come out and you retrieve them. There are two tabs here that just go right in to the door and rest conveniently so that's supported. Then you can put this up. Make sure you have four harnesses that poke up through the opening, here, or more if you have more options on your truck. Then reconnect your cable, slide the ball in, pull out, and push.
Make sure all your harnesses are up and through. Now that your cable's on, this ridge actually needs to go down into this channel here. So, hit the panel up into place. A little higher, you see it slides down. It should go down even. This should come right up through your lock rod. Then, if you look back in, you can actually see this pin here lines right up, and you can just go right around and lock the pins into place. So we want to be able to take these bolts and put them in. They’re a little bit loose, though. So, if you just take a piece of painter's tape, put it on the head of the bolt, stuff your socket on there, and it stays much better. You can guide it right in and start it out. If the painter's tape does stay behind, it's not a big deal, but tighten it by hand first to make sure it's in, and then tighten it up.
This one is pretty easy to get into place. Put the lockdown on. Snap that in place. This one, the round side goes underneath. Put this into place. Switch panel, these all only go in one way. So, like this one won't plug into there. It won't plug into there. It'll only plug into there. Then this one will only plug into there. This one can go in place. The last one, again, it has three tabs. One of ours is broken. Make sure it goes right straight in, kind of look in behind.
Thanks for watching. Visit us at 1AAuto.com for quality auto parts, fast and free shipping, and the best customer service in the industry.
DHA33336
awesome Service,
I had to modify the plastic housing to fit my heated seat switch not by much just enough to get it to fit in
Really nice product, and with the help of the how to video 1A Auto supplies install was a breeze. I did use my oem springs as the 1A Auto springs would make a noise when used. Great service and shipping every time I have made a purchase with 1A Auto. Time will tell with the longevity of handles.
Really happy with all the parts for my Tahoe
2010 Tahoe. Perfect fit and easy to replace, too.
Looks great. Easy install
Had to trim the screw hole on passenger side to get flush mount of heated seat buttons. Other than that work great
Perfect fit, and no failures after two years of family service. No Complaints at all.
A perfect fit with complete easy to understand instructions. I have yet to be disappointed with 1A auto.
Perfect fit, if you didn't know these were replaced you wouldn't have ever known, blend in and look just like stock. Easy replacement, good value, easy order and quick delivery.
