2006-11 Honda Civic Sedan A/C Condenser and Receiver Drier Assembly TRQ ACA84400

The TRQ condenser/receiver drier was a perfect fit for my 2009 Honda Civic. All the required brackets were included as well a 2 o-rings. No leaks. It was a very worth while replacing and relatively easy. The receiver/drier does not appear replaceable as on the oem, but at the low price for the entre assembly, I would not bother with replacing just the drier anyway. The TRQ instructional video was helpful.

A/C condensor came in on time looked great no damaged fins or mounts went in smooth fit just like oem.

This part fit perfect. Now the air conditioner works properly.

The right parts with no problems

My 2011 Civic wouldn't hold an AC charge. I was able to identify it as a damaged condenser (likely from a rock) Ordered the condenser on Friday (5/24/24) morning, received it the next day! Part packaging was fine, upon first inspection it appeared to be a quality part. Removed damaged part and installed the new condenser, tested to make sure the system held a vacuum, then added PAG oil and refrigerant through the low pressure service port as necessary. AC has been blowing ice cold since. 5 stars so far. Great price and part is working as expected, will update if anything changes (5/29/24) Note: if your system still has a refrigerant charge, make sure you have it properly removed, mine had lost all charge from the damaged condenser so i didn't need to do that.

Aaron Verified purchase

Drier not serviceable , bad design in my opinion

Perfect installation.

Amazing my ac wasnt working replaced my condenser with this one and wow my ac Is always so cold now I have to turn it off sometimes! Love it and very easy to install only Took 30 minutes in total

i recently purchased this because I lost my ac and the replacement was easy and everything matched up

I asked the mechanic replace my ac "system". He only changed the compressor. My air was cool for a minute but would begin to blow warm air afterwards. I checked it out and the old condenser and receiver was still installed and it was beat to hell. Found out my nephew had the tools for removing and adding refrigerant so we finished the job the mechanic failed to do. What a difference in air temp. Even out the gate it was 10 times colder. My only gripe is that the mounting bracket for the temp sensor was larger than oem and broke my clip. Since the bracket was welded on I couldn't change back to my oem bracket. Fix that and you have a 5 star product.