Replaces
Assemblies may include halogen or incandescent test bulbs that should be replaced before installation.
Attention California Customers:
WARNING: This product can expose you to chemicals including Chromium (Hexavalent Compounds), which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
This item is backed by our limited lifetime warranty. In the event this item should fail due to manufacturing defects during intended use, we will replace the part free of charge. This warranty covers the cost of the part only.
The bulbs are for testing and not covered under our warranty. Our warranty applies to the light assembly only.
FREE Shipping is standard on Orders shipped to the lower 48 States (Contiguous United States). Standard shipping charges apply to Hawaii, Alaska and US Territories. Shipping is not available to Canada.
Expedited is available on checkout to the United States, excluding Alaska, Hawaii and US Territories as well as P.O. Boxes and APO/FPO/DPO addresses. Final shipping costs are available at checkout.
Created on:
Tools used
Brought to you by 1AAuto.com you're source for all your replacement parts and the best service on the internet.
Hi. I'm Mike Green. I'm one of the owners of 1A Auto. I want to help you save time and money repairing and maintaining your vehicle. I'm going to use my 20 plus years experience restoring and repairing cars and trucks like this to show you the correct way to install parts from 1AAuto.com. The right parts installed correctly. That's going to save you time and money. Thank you and enjoy the video.
Okay, to change a tail light or tail light bulb on a F150 all you will need is a 8mm wrench or socket or also 5/16th does it, basically the same size. Start by removing these two 8mm bolts here. Okay, once those bolts are out this is the part that's a little scary, scares me a little bit, too, but grab the light, grab it in behind here and pull it. You can see there's little pins right here that go into little plastic grommets there. That's what holds it. From there you twist and you can service your bulbs. That's for after or if you've had a little altercation and broken your tail light you can change your tail light simple. Then obviously installation is reverse of the procedure. Bulbs back in. You want to line up this pin with this and then this pin here goes into this hole here. Then it has the same thing at the bottom. It's got a pin here that goes into a hole and the pin here that goes into the grommet. Line everything up, push it in, get your bolts, and you're all set.
We hope this helps you out. Brought to you by www.1AAuto.com. You're source for quality replacement parts and the best service on the internet. Please feel free to call us toll free 888-844-3393. We're the company that's here for you on the internet and in person.
FR391-U100L
